Home Audio, Haptik und Piezo Audioverstärker Lautsprecher-, TV- und Soundbar-Audioverstärker
Home
Audio, Haptik und Piezo
Audioverstärker
Lautsprecher-, TV- und Soundbar-Audioverstärker

TAS5830

AKTIV

Audioverstärker der Klasse D mit Digital-Eingang, 60 W Stereo, 120 W Mono

Jetzt bestellen
Datenblatt

TAS5830

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Control interface I2C Output power (W) 65 Power stage supply (max) (V) 30 Power stage supply (min) (V) 4.5 RDS(on) (Ω) 0.07 THD + N at 1 kHz (%) 0.015 Load (min) (Ω) 1.6 Analog supply voltage (min) (V) 4.5 Analog supply voltage (max) (V) 30 Rating Catalog Operating temperature range (°C) -40 to 85
Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Control interface I2C Output power (W) 65 Power stage supply (max) (V) 30 Power stage supply (min) (V) 4.5 RDS(on) (Ω) 0.07 THD + N at 1 kHz (%) 0.015 Load (min) (Ω) 1.6 Analog supply voltage (min) (V) 4.5 Analog supply voltage (max) (V) 30 Rating Catalog Operating temperature range (°C) -40 to 85
HTSSOP (DAD) 32 89.1 mm² (11 mm × 8.1 mm)
  • Supports multiple output configurations
    • 2 × 80W, BTL Mode(4Ω, 26V, THD+N=10%)
    • 2 × 65W, BTL Mode(4Ω, 26V, THD+N=1%)
    • 2 × 74W, BTL Mode(6Ω, 30V, THD+N=10%)
    • 2 × 63W, BTL Mode(6Ω, 30V, THD+N=1%)
    • 1 × 151W, PBTL Mode(3Ω, 30V, THD+N=10%)
    • 1 × 131W, PBTL Mode(3Ω, 30V, THD+N=1%)
  • Flexible audio I/O:
    • Supports 32, 44.1, 48, 88.2, 96, 192kHz sample rates
    • I2S, LJ, RJ, 4- 16 channels TDM input
    • SDOUT for audio monitoring, sub-channel, or echo cancellation
    • Supports 3-wire digital audio interface (no MCLK required)
  • High-efficiency Class-D modulation
    • > 90% power efficiency, 70mΩ RDSon
  • Excellent audio performance:
    • THD+N ≤ 0.03% at 1 W, 1kHz, PVDD = 12V
    • SNR ≥ 110dB (A-weighted), ICN ≤ 40µVrms
  • Flexible processing features
    • 3-Band advanced DRC + 2 EQs + AGL + 2 EQs
    • 15 BQs per channel, level meter
    • 96kHz, 192kHz processor sampling
    • Mixer, volume, dynamic EQ, output crossbar
    • PVDD sensing and Class-H algorithm audio signal tracking
    • Rattle suppression, Frequency limiter
  • Flexible power supply configurations
    • PVDD: 4.5V to 30V
    • DVDD and I/O: 1.8V or 3.3V
  • Excellent integrated self-protection:
    • Over-current error (OCE)
    • Cycle-by-cycle current limit supports 4 selectable OC levels
    • Over-temperature warning (OTW)
    • Over-temperature error (OTE)
    • Under and over-voltage lock-out (UVLO/OVLO)
    • PVDD voltage drop detection
  • Easy system integration
    • I2C Software Control (TAS5830 supports both Fast and Fast Plus mode) or Hardware Mode
    • Fewer passives required compared to open-loop devices
  • Supports multiple output configurations
    • 2 × 80W, BTL Mode(4Ω, 26V, THD+N=10%)
    • 2 × 65W, BTL Mode(4Ω, 26V, THD+N=1%)
    • 2 × 74W, BTL Mode(6Ω, 30V, THD+N=10%)
    • 2 × 63W, BTL Mode(6Ω, 30V, THD+N=1%)
    • 1 × 151W, PBTL Mode(3Ω, 30V, THD+N=10%)
    • 1 × 131W, PBTL Mode(3Ω, 30V, THD+N=1%)
  • Flexible audio I/O:
    • Supports 32, 44.1, 48, 88.2, 96, 192kHz sample rates
    • I2S, LJ, RJ, 4- 16 channels TDM input
    • SDOUT for audio monitoring, sub-channel, or echo cancellation
    • Supports 3-wire digital audio interface (no MCLK required)
  • High-efficiency Class-D modulation
    • > 90% power efficiency, 70mΩ RDSon
  • Excellent audio performance:
    • THD+N ≤ 0.03% at 1 W, 1kHz, PVDD = 12V
    • SNR ≥ 110dB (A-weighted), ICN ≤ 40µVrms
  • Flexible processing features
    • 3-Band advanced DRC + 2 EQs + AGL + 2 EQs
    • 15 BQs per channel, level meter
    • 96kHz, 192kHz processor sampling
    • Mixer, volume, dynamic EQ, output crossbar
    • PVDD sensing and Class-H algorithm audio signal tracking
    • Rattle suppression, Frequency limiter
  • Flexible power supply configurations
    • PVDD: 4.5V to 30V
    • DVDD and I/O: 1.8V or 3.3V
  • Excellent integrated self-protection:
    • Over-current error (OCE)
    • Cycle-by-cycle current limit supports 4 selectable OC levels
    • Over-temperature warning (OTW)
    • Over-temperature error (OTE)
    • Under and over-voltage lock-out (UVLO/OVLO)
    • PVDD voltage drop detection
  • Easy system integration
    • I2C Software Control (TAS5830 supports both Fast and Fast Plus mode) or Hardware Mode
    • Fewer passives required compared to open-loop devices

The TAS5830 is a stereo high-performance, closed-loop Class-D with integrated audio processor and up to 192kHz audio support.

When setting the device into Hardware control mode, TAS5830 supports selecting switching frequency, analog gain, BTL/PBTL mode and cycle by cycle current limit threshold through pin configuration. This mode is designed to eliminate end system software driver integration efforts.

The TAS5830 also provides the DSP features Rattle suppression and Frequency limiter. Rattle suppression reduces the gain of the signal at frequencies that cause rattle through interaction with the speaker enclosure, improving sound quality. The frequency limiter process senses the input level, limits the gain of EQ dynamically and helps SPL without phase change.

The TAS5830 is a stereo high-performance, closed-loop Class-D with integrated audio processor and up to 192kHz audio support.

When setting the device into Hardware control mode, TAS5830 supports selecting switching frequency, analog gain, BTL/PBTL mode and cycle by cycle current limit threshold through pin configuration. This mode is designed to eliminate end system software driver integration efforts.

The TAS5830 also provides the DSP features Rattle suppression and Frequency limiter. Rattle suppression reduces the gain of the signal at frequencies that cause rattle through interaction with the speaker enclosure, improving sound quality. The frequency limiter process senses the input level, limits the gain of EQ dynamically and helps SPL without phase change.
filter Andere Lautsprecher-, TV- und Soundbar-Audioverstärker suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 6
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TAS5830 65W Stereo, Digital Input, High Efficiency Closed-Loop Class-D Amplifier with Class-H Algorithm datasheet PDF | HTML 20.05.2025
Anwendungshinweis Mastering Audio Performance with TAS58xx Family of Class-D Audio Amplifiers PDF | HTML 29.05.2026
Anwendungshinweis A Designer's Guide to Class-H Implementation in TAS5815, TAS5825P, TAS5827, TAS5828M, and TAS5830 Amplifiers PDF | HTML 28.05.2026
Application brief Speaker, TV, Soundbar Audio Amplifiers: Features, Benefits, and Selection Guide PDF | HTML 11.03.2026
Application brief The Future Speaks: Advancing Intelligent Robots With Texas Instruments' Audio Amplifiers PDF | HTML 22.09.2025
Benutzerhandbuch TAS5827, TAS5828M, and TAS5830 Process Flows PDF | HTML 13.06.2025

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TAS5830EVM — TAS5830 – Evaluierungsmodul

Der TAS5830EVM zeigt den Klasse-D-Verstärker TAS5830 mit geschlossenem Regelkreis. Das Evaluierungsmodul (Evaluation Module, EVM) ist ein eigenständiges EVM, das für seine Funktion keine zusätzlichen Schaltungen benötigt. Der Benutzer kann den TAS5830EVM für einen Stereo- oder Mono-Ausgang (...)
Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTSSOP (DAD) 32 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos