Eine neuere Version dieses Produkts ist verfügbar

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung.
TAA3020 AKTIV Stereokanal, Analog-zu-Digital-Wandler (ADC) für den Audiobereich von mit 768 kHz und 104&nb Higher SNR with 112dB
TLV320ADC3120 AKTIV Stereo-Analog-zu-Digital-Wandler (ADC) für den Audiobereich von Burr-Brown™ mit 768 kHz und 106 dB S Smaller package, 14dB SNR performance upgrade, and more programmability

Produktdetails

Number of ADC channels 2 Sampling rate (max) (kHz) 96 Analog inputs 6 Control interface I2C Digital audio interface DSP, I2S, L, PCM, R, TDM THD+N (dB) -90 ADC SNR (typ) (dB) 92 Rating Catalog Operating temperature range (°C) -40 to 85 Analog outputs 0
Number of ADC channels 2 Sampling rate (max) (kHz) 96 Analog inputs 6 Control interface I2C Digital audio interface DSP, I2S, L, PCM, R, TDM THD+N (dB) -90 ADC SNR (typ) (dB) 92 Rating Catalog Operating temperature range (°C) -40 to 85 Analog outputs 0
VQFN (RGE) 24 16 mm² (4 mm × 4 mm)
  • Stereo Audio ADC
    • 92-dBA Signal-to-Noise Ratio
    • Supports ADC Sample Rates From 8 kHz to
      96 kHz
  • Instruction-Programmable Embedded miniDSP
  • Flexible Digital Filtering With RAM Programmable
    Coefficient, Instructions, and Built-In Processing
    Blocks
    • Low-Latency IIR Filters for Voice
    • Linear Phase FIR Filters for Audio
    • Additional Programmable IIR Filters for EQ,
      Noise Cancellation or Reduction
    • Up to 128 Programmable ADC Digital Filter
      Coefficients
  • Six Audio Inputs With Configurable Automatic
    Gain Control (AGC)
    • Programmable in Single-Ended or Fully
      Differential Configurations
    • Can Be 3-Stated for Easy Interoperability With
      Other Audio ICs
  • Low Power Consumption and Extensive Modular
    Power Control:
    • 6-mW Mono Record, 8-kHz
    • 11-mW Stereo Record, 8-kHz
    • 10-mW Mono Record, 48-kHz
    • 17-mW Stereo Record, 48-kHz
  • Dual Programmable Microphone Bias
  • Programmable PLL for Clock Generation
  • I2C Control Bus
  • Audio Serial Data Bus Supports I2S, Left/Right-
    Justified, DSP, PCM, and TDM Modes
  • Digital Microphone Input Support
  • Two GPIOs
  • Power Supplies:
    • Analog: 2.6 V to 3.6 V
    • Digital: Core: 1.65 V to 1.95 V,
      I/O: 1.1 V–3.6 V
  • 4-mm × 4-mm 24-Pin RGE (VQFN)
  • Stereo Audio ADC
    • 92-dBA Signal-to-Noise Ratio
    • Supports ADC Sample Rates From 8 kHz to
      96 kHz
  • Instruction-Programmable Embedded miniDSP
  • Flexible Digital Filtering With RAM Programmable
    Coefficient, Instructions, and Built-In Processing
    Blocks
    • Low-Latency IIR Filters for Voice
    • Linear Phase FIR Filters for Audio
    • Additional Programmable IIR Filters for EQ,
      Noise Cancellation or Reduction
    • Up to 128 Programmable ADC Digital Filter
      Coefficients
  • Six Audio Inputs With Configurable Automatic
    Gain Control (AGC)
    • Programmable in Single-Ended or Fully
      Differential Configurations
    • Can Be 3-Stated for Easy Interoperability With
      Other Audio ICs
  • Low Power Consumption and Extensive Modular
    Power Control:
    • 6-mW Mono Record, 8-kHz
    • 11-mW Stereo Record, 8-kHz
    • 10-mW Mono Record, 48-kHz
    • 17-mW Stereo Record, 48-kHz
  • Dual Programmable Microphone Bias
  • Programmable PLL for Clock Generation
  • I2C Control Bus
  • Audio Serial Data Bus Supports I2S, Left/Right-
    Justified, DSP, PCM, and TDM Modes
  • Digital Microphone Input Support
  • Two GPIOs
  • Power Supplies:
    • Analog: 2.6 V to 3.6 V
    • Digital: Core: 1.65 V to 1.95 V,
      I/O: 1.1 V–3.6 V
  • 4-mm × 4-mm 24-Pin RGE (VQFN)

The TLV320ADC3101 device is a low-power, stereo audio analog-to-digital converter (ADC) supporting sampling rates from 8 kHz to 96 kHz with an integrated programmable-gain amplifier providing up to 40-dB analog gain or AGC. A programmable miniDSP is provided for custom audio processing. Front-end input coarse attenuation of 0 dB, –6 dB, or off, is also provided. The inputs are programmable in a combination of single-ended or fully differential configurations. Extensive register-based power control is available via an I2C interface, enabling mono or stereo recording. Low power consumption makes the TLV320ADC3101 ideal for battery-powered portable equipment.

The AGC programs to a wide range of attack (7 ms to 1.4 s) and decay (50 ms to 22.4 s) times. A programmable noise-gate function is included to avoid noise pumping. Low-latency IIR filters optimized for voice and telephony are available, as well as linear-phase FIR filters optimized for audio. Programmable IIR filters are also available and may be used for sound equalization, or to remove noise components. The audio serial bus can be programmed to support I2S, left-justified, right-justified, DSP, PCM, and TDM modes. The audio bus may be operated in either master or slave mode.

A programmable integrated PLL is included for flexible clock generation and provides support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, including the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

The TLV320ADC3101 device is a low-power, stereo audio analog-to-digital converter (ADC) supporting sampling rates from 8 kHz to 96 kHz with an integrated programmable-gain amplifier providing up to 40-dB analog gain or AGC. A programmable miniDSP is provided for custom audio processing. Front-end input coarse attenuation of 0 dB, –6 dB, or off, is also provided. The inputs are programmable in a combination of single-ended or fully differential configurations. Extensive register-based power control is available via an I2C interface, enabling mono or stereo recording. Low power consumption makes the TLV320ADC3101 ideal for battery-powered portable equipment.

The AGC programs to a wide range of attack (7 ms to 1.4 s) and decay (50 ms to 22.4 s) times. A programmable noise-gate function is included to avoid noise pumping. Low-latency IIR filters optimized for voice and telephony are available, as well as linear-phase FIR filters optimized for audio. Programmable IIR filters are also available and may be used for sound equalization, or to remove noise components. The audio serial bus can be programmed to support I2S, left-justified, right-justified, DSP, PCM, and TDM modes. The audio bus may be operated in either master or slave mode.

A programmable integrated PLL is included for flexible clock generation and provides support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, including the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 8
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TLV320ADC3101 Low-Power Stereo ADC With Embedded miniDSP for Wireless Handsets and Portable Audio datasheet (Rev. B) PDF | HTML 31.08.2015
Anwendungshinweis Audio Serial Interface Configurations for Audio Codecs (Rev. A) 27.06.2019
Anwendungshinweis Synchronizinging Multiple Parallel Devices Using the Internal PLL (Rev. A) 02.01.2019
Anwendungshinweis Common Noise Issues in Audio Codecs 21.07.2017
Anwendungshinweis Coefficient RAM Access Mechanisms.. (Rev. D) 25.01.2012
Anwendungshinweis Configure the coefficients for Digital Biquad Filters in TLV320AIC3xxx family 27.04.2010
Anwendungshinweis Interfacing an I2S Device to an MSP430 Device (Rev. A) 22.03.2010
Anwendungshinweis Using TLV320AIC3x Digital Audio Data Serial Interface w/TDM Support 05.07.2006

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TLV320ADC3101EVM-K — TLV320ADC3101-Evaluierungsmodul und USB-Hauptplatine

Der TLV320ADC3101EVM befindet sich im modularen EVM-Formfaktor von Texas Instruments (TI), der eine direkte Evaluierung der Geräteleistung und der Betriebseigenschaften ermöglicht und die Entwicklung von Software und Systemprototypen vereinfacht. Das TLV320ADC3101EVM-K ist ein vollständiges (...)

Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
IDE, Konfiguration, Compiler oder Debugger

PUREPATHSTUDIO — PurePath™ Studio graphical development environment

PurePath™ Studio ist eine leistungsfähige und benutzerfreundliche grafische Entwicklungsumgebung, die speziell dafür entwickelt wurde, die Softwareentwicklung für Audioprodukte mit miniDSP-Audioverarbeitungsfunktionen zu vereinfachen.

Die GDE ermöglicht die Programmierung dieser Bausteine, um die (...)

Unterstützte Produkte und Hardware
Treiber oder Bibliothek

TLV320ADC31XX-DRIVERS — Linux-Treiberunterstützung für die ADC-Familie TLV320ADC31XX

Diese Linux-Treiber unterstützen unsere energieeffizienten Audio-Codecs in der Bausteinfamilie TLV320AIC2x und enthalten sowohl .c- als auch .h-Dateien. Über die Schaltflächen „Zum Fremdanbieter“ unten können Sie die entsprechenden Treiber von git.kernal.org herunterladen.

Linux-Hauptleitungsstatus
(...)
Unterstützte Produkte und Hardware
Support-Software

SBAC293 — TLV320ADC310x C Source Headers

Unterstützte Produkte und Hardware
Simulationsmodell

TLV320ADC3101 IBIS Model

SLAM171.ZIP (144 KB) - IBIS-Modell
Unterstützte Produkte und Hardware
Berechnungstool

COEFFICIENT-CALC — Coefficient Calculator For Digital Biquad Filters

COEFFICIENT-CALC (TIBQ) calculates the coefficients for the digital filter biquad transfer function implemented in TI audio codecs. The characteristics of the digital filter are adjusted by selecting a filter type and moving a control point within a window that shows the transfer function gain and (...)

Unterstützte Produkte und Hardware
Berechnungstool

SLAR163 — Audio CODEC/ADC PLL Calculator

Unterstützte Produkte und Hardware
Referenzdesign

BT-MSPAUDSOURCE-RD — Referenzdesign für Audioquelle mit Bluetooth und MSP-MCU

The Bluetooth and low-power MSP microcontroller Audio Source reference design can be used by customers to create a variety of applications for low-end, low-power audio source solutions for applications including toys, projectors, smart remotes and any audio streaming accessories. This reference (...)

Unterstützte Produkte und Hardware
Referenzdesign

TIDA-01589 — Referenzdesign für High Fidelity, Nahfeld-Zweiwege-Audio mit Rauschunterdrückung und Echounterdrücku

Die Interaktion zwischen Mensch und Maschine erfordert eine akustische Schnittstelle für die freihändige Vollduplex-Kommunikation. Im Freisprech-Modus wird ein Teil des fernen oder nahen Audiosignals des Sprechers mit den Mikrofonen gekoppelt. Außerdem erfassen die Mikrofone in lauten Umgebungen (...)
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN (RGE) 24 Ultra Librarian

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos