Startseite Audio, Haptik und Piezo Audioverstärker Universalaudioverstärker
Startseite
Audio, Haptik und Piezo
Audioverstärker
Universalaudioverstärker

TPA3125D2

AKTIV

Class-D-Audioverstärker mit Analog-Eingang, 10 W Stereo, 20 W Mono, 10 bis 26 V Versorgungsspannung,

Jetzt bestellen
Datenblatt

TPA3125D2

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Audio input type Analog Input Architecture Class-D Speaker channels (max) Stereo Control interface Hardware Power stage supply (max) (V) 26 Power stage supply (min) (V) 10 THD + N at 1 kHz (%) 0.04 Load (min) (Ω) 4 Analog supply voltage (min) (V) 10 Analog supply voltage (max) (V) 26 Rating Catalog Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Speaker channels (max) Stereo Control interface Hardware Power stage supply (max) (V) 26 Power stage supply (min) (V) 10 THD + N at 1 kHz (%) 0.04 Load (min) (Ω) 4 Analog supply voltage (min) (V) 10 Analog supply voltage (max) (V) 26 Rating Catalog Operating temperature range (°C) -40 to 85
PDIP (N) 20 228.702 mm² 24.33 x 9.4
  • 10-W/Ch (stereo SE) into an 8-Ω Load From a 24-V Supply
  • 20-W/Ch (mono BTL) into an 8-Ω Load from a 24-V Supply
  • Operates From 10 V to 26 V
  • Operates From +24 V LCD Backlight Supply
  • Efficient Class-D Operation Eliminates Need for Heat Sinks
  • Four Selectable, Fixed-Gain Settings
  • Single-Ended Analog Inputs
  • Thermal and Short-Circuit Protection With Auto Recovery
  • 20-Pin DIP Package
  • Advanced Power-Off Pop Reduction
  • APPLICATIONS
    • Flat Panel Televisions
    • DLP TVs
    • CRT TVs
    • Powered Speakers

DLP Is a trademark of Texas Instruments
System Two, Audio Precision are trademarks of Audio Precision, Inc.
  • 10-W/Ch (stereo SE) into an 8-Ω Load From a 24-V Supply
  • 20-W/Ch (mono BTL) into an 8-Ω Load from a 24-V Supply
  • Operates From 10 V to 26 V
  • Operates From +24 V LCD Backlight Supply
  • Efficient Class-D Operation Eliminates Need for Heat Sinks
  • Four Selectable, Fixed-Gain Settings
  • Single-Ended Analog Inputs
  • Thermal and Short-Circuit Protection With Auto Recovery
  • 20-Pin DIP Package
  • Advanced Power-Off Pop Reduction
  • APPLICATIONS
    • Flat Panel Televisions
    • DLP TVs
    • CRT TVs
    • Powered Speakers

DLP Is a trademark of Texas Instruments
System Two, Audio Precision are trademarks of Audio Precision, Inc.

The TPA3125D2 is a 10-W (per channel), efficient, class-D audio power amplifier for driving stereo speakers in a single-ended configuration; or, a mono speaker in a bridge-tied-load configuration. The TPA3125D2 can drive stereo speakers as low as 4 Ω. The efficiency of the TPA3125D2 eliminates the need for an external heat sink when playing music. The gain of the amplifier is controlled by two gain select pins. The gain selections are 20, 26, 32, and 36 dB.

The patented start-up and shutdown sequences minimize pop noise in the speakers without additional circuitry.

The thru-hole package allows placement on single-sided printed circuit boards.

The TPA3125D2 is a 10-W (per channel), efficient, class-D audio power amplifier for driving stereo speakers in a single-ended configuration; or, a mono speaker in a bridge-tied-load configuration. The TPA3125D2 can drive stereo speakers as low as 4 Ω. The efficiency of the TPA3125D2 eliminates the need for an external heat sink when playing music. The gain of the amplifier is controlled by two gain select pins. The gain selections are 20, 26, 32, and 36 dB.

The patented start-up and shutdown sequences minimize pop noise in the speakers without additional circuitry.

The thru-hole package allows placement on single-sided printed circuit boards.
filter Andere Universalaudioverstärker suchen
Herunterladen

Klasse D-Audioverstärker der nächsten Generation mit 15 W Stereo und Analogeingang:  TPA3110D2

Klasse D-Audioverstärker der nächsten Generation mit 10 W Stereo, geringer elektromagnetischer Störungen (EMI) und Analogeingang:  TPA3136D2

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet 10W Stereo Class-D Audio Power Amplifier datasheet 12 Dez 2008

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​