Startseite Energiemanagement Linear- und Low-Dropout-Regler (LDO)
NEU

TPS7H1121-SEP

AKTIV

Strahlungsfester Regler, 2 A Low-Dropout (LDO), 2.25 V bis 14 V Eingänge

Produktdetails

Rating Space Vin (max) (V) 14 Vin (min) (V) 2.25 Iout (max) (A) 2 Output options Adjustable Output Vout (max) (V) 13.2 Vout (min) (V) 0.6 Fixed output options (V) 0 Noise (µVrms) 4 PSRR at 100 KHz (dB) 45 Iq (typ) (mA) 10 Features Adjustable current limit, Enable, Power good, Soft start Thermal resistance θJA (°C/W) 30.5 Load capacitance (min) (µF) 6.8 Regulated outputs (#) 1 Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 400 Operating temperature range (°C) -55 to 125 Radiation, SEL (MeV·cm2/mg) 43 Radiation, TID (typ) (krad) 50
Rating Space Vin (max) (V) 14 Vin (min) (V) 2.25 Iout (max) (A) 2 Output options Adjustable Output Vout (max) (V) 13.2 Vout (min) (V) 0.6 Fixed output options (V) 0 Noise (µVrms) 4 PSRR at 100 KHz (dB) 45 Iq (typ) (mA) 10 Features Adjustable current limit, Enable, Power good, Soft start Thermal resistance θJA (°C/W) 30.5 Load capacitance (min) (µF) 6.8 Regulated outputs (#) 1 Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 400 Operating temperature range (°C) -55 to 125 Radiation, SEL (MeV·cm2/mg) 43 Radiation, TID (typ) (krad) 50
HTSSOP (PWP) 24 49.92 mm² 7.8 x 6.4
  • Total Ionizing Dose radiation characterized:
    • Radiation hardness assurance (RHA) availability of 100krad(Si) or 50krad(Si)

  • Single-Event Effects (SEE) Characterized
    • Single-event latch-up (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune to linear energy transfer (LET) = 75MeV-cm2/mg
    • Single-event functional interrupt (SEFI) characterized to LET = 75MeV-cm2/mg
    • Single-event transient (SET) characterized to LET = 75MeV-cm2/mg
  • Wide VIN range: 2.25V to 14V
  • 2A maximum output current
  • ±1.5% accuracy VIN > 3V over load, and temperature
  • ±1.8% accuracy VIN < 3V over load, and temperature
  • Soft start (SS) control through an external capacitor
  • Open-drain power good (PG) output for power sequencing
  • Programmable current limit through an external resistor (CL)
  • Optional external control loop compensation utilizing the STAB pin
  • Excellent load and line transient response
  • Plastic packages out gas tested per ASTM E595
  • Military (–55°C to 125°C) temperature range
  • Total Ionizing Dose radiation characterized:
    • Radiation hardness assurance (RHA) availability of 100krad(Si) or 50krad(Si)

  • Single-Event Effects (SEE) Characterized
    • Single-event latch-up (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune to linear energy transfer (LET) = 75MeV-cm2/mg
    • Single-event functional interrupt (SEFI) characterized to LET = 75MeV-cm2/mg
    • Single-event transient (SET) characterized to LET = 75MeV-cm2/mg
  • Wide VIN range: 2.25V to 14V
  • 2A maximum output current
  • ±1.5% accuracy VIN > 3V over load, and temperature
  • ±1.8% accuracy VIN < 3V over load, and temperature
  • Soft start (SS) control through an external capacitor
  • Open-drain power good (PG) output for power sequencing
  • Programmable current limit through an external resistor (CL)
  • Optional external control loop compensation utilizing the STAB pin
  • Excellent load and line transient response
  • Plastic packages out gas tested per ASTM E595
  • Military (–55°C to 125°C) temperature range

The TPS7H1121 is a radiation-hardened, low dropout linear regulator (LDO) which operates over a wide input voltage range and is optimized for powering devices in a space environment. The device is capable of sourcing up to 2A over a 2.25V to 14V input.

The device offers excellent stability and features a programmable current limit with a wide adjustment range. To support the complex power requirements of FPGAs, DSPs, and microcontrollers, the TPS7H1121 provides enable on and off functionality, programmable soft start, and a power good open-drain output.

The TPS7H1121 is a radiation-hardened, low dropout linear regulator (LDO) which operates over a wide input voltage range and is optimized for powering devices in a space environment. The device is capable of sourcing up to 2A over a 2.25V to 14V input.

The device offers excellent stability and features a programmable current limit with a wide adjustment range. To support the complex power requirements of FPGAs, DSPs, and microcontrollers, the TPS7H1121 provides enable on and off functionality, programmable soft start, and a power good open-drain output.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein
TPS7H1111-SEP AKTIV Strahlungstoleranter, extrem rauscharmer 1,5-A-RF-LDO-Regler mit extrem hohem PSRR This is a lower-noise higher-PSRR -SEP LDO.

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 9
Typ Titel Datum
* Data sheet TPS7H1121-SP and TPS7H1121-SEP 2.25V to 14V Input, 2A, Radiation Hardened Low Dropout (LDO) Linear Regulator datasheet (Rev. C) PDF | HTML 03 Nov 2025
* Radiation & reliability report TPS7H1121-SEP Neutron Displacement Damage (NDD) Characterization 05 Dez 2025
* Radiation & reliability report TPS7H1121-SEP Production Flow and Reliability Report (Rev. A) PDF | HTML 31 Okt 2025
* Radiation & reliability report TPS7H1121-SEP Total Ionizing Dose (TID) Radiation Report 16 Okt 2025
* Radiation & reliability report TPS7H1121-SEP Single-Event Effects (SEE) PDF | HTML 15 Okt 2025
Certificate TPS7H1121EVM EU Declaration of Conformity (DoC) 12 Jun 2025
Selection guide TI Space Products (Rev. K) 04 Apr 2025
Application note Reduce the Risk in Low-Earth Orbit Missions with Space Enhanced Plastic Products (Rev. A) PDF | HTML 15 Sep 2022
E-book Radiation Handbook for Electronics (Rev. A) 21 Mai 2019

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS7H1121EVM — TPS7H1121-SEP und QMLP Evaluierungsmodul für 2 A-Low-Dropout-Regler (LDO) mit 2,25 V bis 14 V Eingän

Das TPS7H1121EVM demonstriert den Betrieb eines einzelnen LDO-Reglers TPS7H1121-SEP (Kunststoffgehäuse). Die Platine bietet Stellflächen, die mit zusätzlichen Komponenten bestückt werden können, um das Testen benutzerdefinierter Konfigurationen zu ermöglichen. Dazu kommen Prüfpunkte und (...)

Benutzerhandbuch: PDF | HTML
Simulationsmodell

TPS7H1121-SP PSpice Model

SLVME97.ZIP (36 KB) - PSpice Model
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTSSOP (PWP) 24 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos