Inicio Circuitos integrados de gestión de baterías Circuitos integrados para cargador de batería
Inicio
Circuitos integrados de gestión de baterías
Circuitos integrados para cargador de batería
NUEVO

BQ24810

ACTIVO

Contr. de cga. de bat. buck SMBus de 1 a 4 cel. con ref. de pot. híb., modo de ref. de bat. y GaN

Haga su pedido ahora
Hoja de datos

BQ24810

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Number of series cells 1, 2, 3, 4 Cell chemistry Lead Acid, Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, NiCd, NiMH Charge current (max) (A) 8.128 Features IC thermal regulation, Input OVP, Power Path, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 4.5 Vin (max) (V) 24 Absolute max Vin (max) (V) 30 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 1.024 Battery charge voltage (max) (V) 19.2 Control interface SMBus Operating temperature range (°C) -40 to 85
Rating Catalog Number of series cells 1, 2, 3, 4 Cell chemistry Lead Acid, Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, NiCd, NiMH Charge current (max) (A) 8.128 Features IC thermal regulation, Input OVP, Power Path, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 4.5 Vin (max) (V) 24 Absolute max Vin (max) (V) 30 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 1.024 Battery charge voltage (max) (V) 19.2 Control interface SMBus Operating temperature range (°C) -40 to 85
WQFN (RUY) 28 16 mm² 4 x 4
  • Hybrid Power Boost Mode to power up system from adapter and battery together
    • Ultra-fast transient response of 100µs to enter Hybrid Power Boost Mode
    • Ultra-fast ICHG recovery within 60µs after exiting Hybrid Power Boost Mode
  • Battery Only Boost Mode to support larger system transients and extend battery run time
  • Peak power two-level input current limit to maximize the power from adapter and minimize battery discharge
  • Charge 1- to 4-cell battery pack from 4.5V to 24V adapter
  • High accuracy power and current monitoring for CPU throttling
    • Comprehensive PROCHOT profile
    • ± 2% Current monitor accuracy
    • ± 5% System Power Monitor Accuracy (PMON)
  • Automatic NMOS power source selection from adapter or battery
    • ACFET fast turn on in 100µs when exiting learn mode from battery removal
  • Programmable input current, charge voltage, charge and discharge current limit
    • ±0.4% Charge voltage (16mV/step)
    • ±2% Input current (64mA/step)
    • ±2% Charge current (64mA/step)
    • ±2% Discharge current (512mA/step)
  • High integration
    • Battery LEARN function
    • Battery present monitor
    • Boost Mode indicator
    • Loop compensation
    • BTST Diode
  • Enhanced safety features for overvoltage protection, overcurrent protection, battery, inductor, and MOSFET short-circuit protection
  • Switching frequency: 300kHz, 400kHz, 600kHz, and 800kHz
  • Realtime system control on ILIM pin to limit charge and discharge current
  • 0.65mA Adapter standby quiescent current for Energy Star
  • Input current limit (IINDPM) up to 21.12A/10.56A with 5mΩ/10mΩ sense resistor
  • VSYSMIN regulation up to 16.128V+2.3V during battery only boost mode
  • Hybrid Power Boost Mode to power up system from adapter and battery together
    • Ultra-fast transient response of 100µs to enter Hybrid Power Boost Mode
    • Ultra-fast ICHG recovery within 60µs after exiting Hybrid Power Boost Mode
  • Battery Only Boost Mode to support larger system transients and extend battery run time
  • Peak power two-level input current limit to maximize the power from adapter and minimize battery discharge
  • Charge 1- to 4-cell battery pack from 4.5V to 24V adapter
  • High accuracy power and current monitoring for CPU throttling
    • Comprehensive PROCHOT profile
    • ± 2% Current monitor accuracy
    • ± 5% System Power Monitor Accuracy (PMON)
  • Automatic NMOS power source selection from adapter or battery
    • ACFET fast turn on in 100µs when exiting learn mode from battery removal
  • Programmable input current, charge voltage, charge and discharge current limit
    • ±0.4% Charge voltage (16mV/step)
    • ±2% Input current (64mA/step)
    • ±2% Charge current (64mA/step)
    • ±2% Discharge current (512mA/step)
  • High integration
    • Battery LEARN function
    • Battery present monitor
    • Boost Mode indicator
    • Loop compensation
    • BTST Diode
  • Enhanced safety features for overvoltage protection, overcurrent protection, battery, inductor, and MOSFET short-circuit protection
  • Switching frequency: 300kHz, 400kHz, 600kHz, and 800kHz
  • Realtime system control on ILIM pin to limit charge and discharge current
  • 0.65mA Adapter standby quiescent current for Energy Star
  • Input current limit (IINDPM) up to 21.12A/10.56A with 5mΩ/10mΩ sense resistor
  • VSYSMIN regulation up to 16.128V+2.3V during battery only boost mode

The BQ24810 device is a high-efficiency, synchronous buck multi-chemistry battery charger supporting 1-, 2-, 3-, or 4-series Li+ cells, or other battery chemistries up to 19.2V.

Through SMBus, a host microcontroller programs charge current, charge voltage, input current limit and discharge current limit with high regulation accuracies. Additionally, the BQ24810 supports a two level input current limit (Peak Power mode) to fully utilize the adapter capabilities and reduce battery discharge. The BQ24810 provides adapter current (IADP), battery discharge current (IDCHG), and system power (PMON) signals to the host microcontroller and outputs the PROCHOT signal to throttle back CPU speed when needed.

The BQ24810 supports hybrid power boost mode to boost the battery voltage to supplement the adapter when system power demand is temporarily higher than the adapter is able to provide. When the adapter is not present, the BQ24810 supports battery only boost mode to boost the battery voltage above the minimum system operating voltage, providing more headroom to support system transients.

The BQ24810 device is a high-efficiency, synchronous buck multi-chemistry battery charger supporting 1-, 2-, 3-, or 4-series Li+ cells, or other battery chemistries up to 19.2V.

Through SMBus, a host microcontroller programs charge current, charge voltage, input current limit and discharge current limit with high regulation accuracies. Additionally, the BQ24810 supports a two level input current limit (Peak Power mode) to fully utilize the adapter capabilities and reduce battery discharge. The BQ24810 provides adapter current (IADP), battery discharge current (IDCHG), and system power (PMON) signals to the host microcontroller and outputs the PROCHOT signal to throttle back CPU speed when needed.

The BQ24810 supports hybrid power boost mode to boost the battery voltage to supplement the adapter when system power demand is temporarily higher than the adapter is able to provide. When the adapter is not present, the BQ24810 supports battery only boost mode to boost the battery voltage above the minimum system operating voltage, providing more headroom to support system transients.
filter Buscar otro/a Circuitos integrados para cargador de batería
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Tipo Título Fecha
* Data sheet BQ24810 SMBus 1- to 4-Cell Buck Battery Charge Controller With Peak Power, Hybrid Power Boost and Battery Only Boost Modes datasheet PDF | HTML 21 ago 2025
Technical article Hot plugging DC/DC converters safely PDF | HTML 02 sep 2025
Certificate BQ24810 EU Declaration of Conformity (DoC) 13 ago 2025

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

BQ24810EVM — Módulo de evaluación BQ24810

El módulo de evaluación (EVM) BQ24810 es un sistema de evaluación para el circuito integrado (IC) BQ24810. El IC BQ24810 es un controlador de carga de batería solo buck con modo de potencia híbrida, refuerzo solo de batería y capacidad de monitoreo en caliente del procesador. El rango de tensión (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN (RUY) 28 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos