Inicio Conectividad inalámbrica Productos de 2.4 GHz de baja potencia
Inicio
Conectividad inalámbrica
Productos de 2.4 GHz de baja potencia
NUEVO

CC2340R5MODA

ACTIVO

MCU inalámbrico Arm Cortex-M0+ de 32 bits SimpleLink™ con Bluetooth baja energía y flash de 512 k

Haga su pedido ahora
Hoja de datos
Guías de usuario

CC2340R5MODA

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

CPU Arm® Cortex®-M0+ Technology Bluetooth low energy, Proprietary 2.4 GHz Protocols Bluetooth® Low Energy, Proprietary 2.4 GHz Flash memory (kByte) 512 RAM (kByte) 64 Peripherals 1 SPI, 1 UART, 1 comparator, 12-bit ADC 8-channel, 4 timers, I2C, Integrated battery monitor, Integrated temperature monitor, Real-time clock (RTC) Features OAD Number of GPIOs 12 Security Cryptographic acceleration Cryptographic accelerators AES, RNG Operating system FreeRTOS, Zephyr RTOS Type Wireless module Sensitivity (best) (dBm) -101 Operating temperature range (°C) -40 to 85 TX power (max) (dBm) 8
CPU Arm® Cortex®-M0+ Technology Bluetooth low energy, Proprietary 2.4 GHz Protocols Bluetooth® Low Energy, Proprietary 2.4 GHz Flash memory (kByte) 512 RAM (kByte) 64 Peripherals 1 SPI, 1 UART, 1 comparator, 12-bit ADC 8-channel, 4 timers, I2C, Integrated battery monitor, Integrated temperature monitor, Real-time clock (RTC) Features OAD Number of GPIOs 12 Security Cryptographic acceleration Cryptographic accelerators AES, RNG Operating system FreeRTOS, Zephyr RTOS Type Wireless module Sensitivity (best) (dBm) -101 Operating temperature range (°C) -40 to 85 TX power (max) (dBm) 8
QFM (MHA) 24 70 mm² (10 mm × 7 mm)

Certified wireless module

  • Optimized 48MHz Arm Cortex-M0+ processor
  • 512KB of in-system programmable flash
  • 12KB of ROM for bootloader and drivers
  • 64KB of ultra-low leakage SRAM. Full RAM retention in standby mode
  • 2.4GHz RF transceiver compatible with Bluetooth Low Energy
  • Built on the CC2340R53 WCSP package
  • Integrated antenna
  • Optional external antenna
  • Supports over-the-air upgrade (OTA)
  • Serial wire debug (SWD)

Low power consumption

  • MCU consumption:
    • 2.6mA active mode, CoreMark
    • 53µA/MHz running CoreMark
    • 710nA standby mode
    • 165nA shutdown mode, wake-up on pin
  • Radio consumption:
    • 5.5mA RX
    • 5.1mA TX at 0dBm
    • < 11.0mA TX at +8dBm

Wireless protocol support

  • Bluetooth® LE(1)
    • Features: LE 2M, LE Coded, Periodic Advertising, Extended Advertising, LE Secure Connections
    • Qualified against Bluetooth Core 5.4

High-performance radio

  • -102dBm sensitivity for Bluetooth® Low Energy 125kbps
  • -96.5dBm sensitivity for Bluetooth® Low Energy 1Mbps
  • Output power up to +8dBm with temperature compensation

Regulatory compliance

  • Designed for systems targeting compliance with these standards:
    • EN 300 328 (Europe)
    • FCC CFR47 Part 15
    • ARIB STD-T66 (Japan)
    • ISED (Canada)
    • NCC (Taiwan)
    • KCC (Korea)
  • Up to 12 I/O pads
    • 2 IO pads SWD, muxed with GPIOs
    • 2 IO pads LFXT, muxed with GPIOs
    • Up to 12 DIOs (analog or digital IOs)
  • 3 × 16-bit and 1× 24-bit general-purpose timers, quadrature decode mode support
  • 12-bit ADC, 267ksps with internal reference, 4 external ADC inputs
  • 1× low power comparator
  • 1× UART
  • 1× SPI
  • 1× I2C
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor
  • Watchdog timer

Security enablers

  • AES 128-bit cryptographic accelerator
  • Random number generator from on-chip analog noise

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.71V to 3.8V single supply voltage
  • Tj: –40°C up to +85°C

RoHS-compliant package

  • 7mm x 10mm 24 pin MHA Package

(1)Module is pre-certified for Bluetooth LE only

Certified wireless module

  • Optimized 48MHz Arm Cortex-M0+ processor
  • 512KB of in-system programmable flash
  • 12KB of ROM for bootloader and drivers
  • 64KB of ultra-low leakage SRAM. Full RAM retention in standby mode
  • 2.4GHz RF transceiver compatible with Bluetooth Low Energy
  • Built on the CC2340R53 WCSP package
  • Integrated antenna
  • Optional external antenna
  • Supports over-the-air upgrade (OTA)
  • Serial wire debug (SWD)

Low power consumption

  • MCU consumption:
    • 2.6mA active mode, CoreMark
    • 53µA/MHz running CoreMark
    • 710nA standby mode
    • 165nA shutdown mode, wake-up on pin
  • Radio consumption:
    • 5.5mA RX
    • 5.1mA TX at 0dBm
    • < 11.0mA TX at +8dBm

Wireless protocol support

  • Bluetooth® LE(1)
    • Features: LE 2M, LE Coded, Periodic Advertising, Extended Advertising, LE Secure Connections
    • Qualified against Bluetooth Core 5.4

High-performance radio

  • -102dBm sensitivity for Bluetooth® Low Energy 125kbps
  • -96.5dBm sensitivity for Bluetooth® Low Energy 1Mbps
  • Output power up to +8dBm with temperature compensation

Regulatory compliance

  • Designed for systems targeting compliance with these standards:
    • EN 300 328 (Europe)
    • FCC CFR47 Part 15
    • ARIB STD-T66 (Japan)
    • ISED (Canada)
    • NCC (Taiwan)
    • KCC (Korea)
  • Up to 12 I/O pads
    • 2 IO pads SWD, muxed with GPIOs
    • 2 IO pads LFXT, muxed with GPIOs
    • Up to 12 DIOs (analog or digital IOs)
  • 3 × 16-bit and 1× 24-bit general-purpose timers, quadrature decode mode support
  • 12-bit ADC, 267ksps with internal reference, 4 external ADC inputs
  • 1× low power comparator
  • 1× UART
  • 1× SPI
  • 1× I2C
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor
  • Watchdog timer

Security enablers

  • AES 128-bit cryptographic accelerator
  • Random number generator from on-chip analog noise

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.71V to 3.8V single supply voltage
  • Tj: –40°C up to +85°C

RoHS-compliant package

  • 7mm x 10mm 24 pin MHA Package

(1)Module is pre-certified for Bluetooth LE only

The CC2340R5MODA SimpleLink™ of devices are 2.4GHz wireless microcontrollers (MCUs), targeting Bluetooth® Low Energy. These devices are optimized for low-power wireless communication with Over the Air Download (OAD) support in Building automation (wireless sensors, lighting control, beacons), asset tracking, medical, and Personal electronics (toys) markets. Highlighted features of this device include:

  • The CC2340R5MODA is a 7mm x 10mm certified wireless module 2.4GHz with integrated antenna, DCDC components and high-frequency crystal oscillator.
  • Support for Bluetooth 5 features: high-speed mode (2Mbps PHY), long-range (LE Coded 125kbps and 500kbps PHYs), privacy 1.2.1 and channel selection algorithm #2, as well as backward compatibility and support for key features from the Bluetooth 4.2 and earlier Low Energy specifications.
  • Fully qualified Bluetooth software protocol stack included with the SimpleLink™ Low Power F3 software development kit (SDK)
  • Ultra-low standby current less than 0.71µA with RTC operational and full RAM retention that enables significant battery life extension, especially for applications with longer sleep intervals.
  • Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth Low Energy (–102dBm for 125kbps LE Coded PHY)

The CC2340R5MODA family is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single-core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit the SimpleLink™ MCU platform.

The CC2340R5MODA SimpleLink™ of devices are 2.4GHz wireless microcontrollers (MCUs), targeting Bluetooth® Low Energy. These devices are optimized for low-power wireless communication with Over the Air Download (OAD) support in Building automation (wireless sensors, lighting control, beacons), asset tracking, medical, and Personal electronics (toys) markets. Highlighted features of this device include:

  • The CC2340R5MODA is a 7mm x 10mm certified wireless module 2.4GHz with integrated antenna, DCDC components and high-frequency crystal oscillator.
  • Support for Bluetooth 5 features: high-speed mode (2Mbps PHY), long-range (LE Coded 125kbps and 500kbps PHYs), privacy 1.2.1 and channel selection algorithm #2, as well as backward compatibility and support for key features from the Bluetooth 4.2 and earlier Low Energy specifications.
  • Fully qualified Bluetooth software protocol stack included with the SimpleLink™ Low Power F3 software development kit (SDK)
  • Ultra-low standby current less than 0.71µA with RTC operational and full RAM retention that enables significant battery life extension, especially for applications with longer sleep intervals.
  • Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth Low Energy (–102dBm for 125kbps LE Coded PHY)

The CC2340R5MODA family is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single-core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit the SimpleLink™ MCU platform.
filter Buscar otro/a Productos de 2.4 GHz de baja potencia
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos CC2340R5MODA SimpleLink™ 2.4GHz Wireless MCU Module with Integrated Antenna datasheet (Rev. A) PDF | HTML 10/07/2026
* Guía del usuario CC23xx SimpleLink Wireless MCU Technical Reference Manual (Rev. A) PDF | HTML 7/08/2024
* Errata CC2340R5 SimpleLink Wireless MCU Device (Rev. F) PDF | HTML 29/09/2025
Nota sobre la aplicación CC2340R5MODA Manual Information for the End User and OEM Installation Guide PDF | HTML 6/07/2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LP-EM-CC2340R53 — Kit de desarrollo LaunchPad™ para la familia CC2340R SimpleLink™ de MCU inalámbricos multiestándar d

Este kit de desarrollo LaunchPad™, que incluye el CC2340R53, se utiliza para acelerar el desarrollo con la familia CC2340R SimpleLink™ de MCU inalámbricas de 2.4 GHz compatibles con Bluetooth® baja energía, Thread, Zigbee® y protocolos propietarios de 2.4 GHz. El soporte de software lo proporciona (...)
Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Kit de desarrollo

LP-XDS110 — Depurador del kit de desarrollo LaunchPad™ XDS110

El depurador del kit de desarrollo LaunchPad LP-XDS110 es una herramienta para programar y depurar microcontroladores, microprocesadores y dispositivos DSP compatibles con XDS de Texas Instruments (TI). El LP-XDS110 está diseñado para conectarse directamente a Launchpads divididos a través del (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Kit de desarrollo

LP-XDS110ET — Kit de desarrollo XDS110ET LaunchPad™ depurador con software EnergyTrace™

El depurador del kit de desarrollo LaunchPad LP-XDS110ET es una herramienta para programar y depurar microcontroladores, microprocesadores y dispositivos DSP compatibles con XDS de Texas Instruments (TI). El LP-XDS110ET puede conectarse directamente a kits de desarrollo Split Launchpad a través del (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Sonda de depuración

TMDSEMU110-U — Sonda de depuración XDS110 JTAG

El XDS110 de Texas Instruments es una nueva clase de sonda de depuración (emulador) para procesadores integrados de TI. El XDS110 sustituye a la familia XDS100, al tiempo que es compatible con una mayor variedad de estándares (IEEE1149.1, IEEE1149.7, SWD) en un único pod. Todas las sondas de (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Kit de desarrollo de software (SDK)

SIMPLELINK-LOWPOWER-F3-SDK — SimpleLink™ Low Power F3 software development kit (SDK) for the CC23xx and CC27xx devices

Los kits de desarrollo de software (SDK) de baja potencia de SimpleLink™ son compatibles con la familia de productos CC13xx, CC23xx, CC26xx y CC27xx. Juntos, estos SDK proporcionan paquetes de programas completos para el desarrollo de aplicaciones Sub-1 GHz y 2.4 GHz que incluyen compatibilidad con (...)

Productos y hardware compatibles
Kit de desarrollo de software (SDK)

SIMPLELINK-LOWPOWER-ZEPHYR-SDK — Zephyr® Platform support for the SimpleLink™ Low Power family of devices

Los kits de desarrollo de software (SDK) de baja potencia de SimpleLink™ son compatibles con la familia de productos CC13xx, CC23xx, CC26xx y CC27xx. Juntos, estos SDK proporcionan paquetes de programas completos para el desarrollo de aplicaciones Sub-1 GHz y 2.4 GHz que incluyen compatibilidad con (...)

Productos y hardware compatibles
Kit de desarrollo de software (SDK)

SIMPLELINK-TI-OPENTHREAD-SDK — SimpleLink™ family of devices OpenThread software

This Texas Instruments OpenThread GitHub repository (ot-ti) contains all the software development components and tools that enable engineers to develop Thread based products.
Productos y hardware compatibles
IDE, configuración, compilador o depurador

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

Productos y hardware compatibles
IDE, configuración, compilador o depurador

CCSTUDIO-OPENOCD — OpenOCD Binary Releases

Pre-built binaries for the popular open-source OpenOCD debug stack.
Productos y hardware compatibles
IDE, configuración, compilador o depurador

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

Productos y hardware compatibles
Capacitación en línea

SIMPLELINK-ACADEMY-CC23XX — Simplelink™ CC23xx Academy

SimpleLink™ Academy is an interactive learning experience for TI's wireless protocols. Our hands-on training modules cover all phases of development for LaunchPad™ development kits alongside software development kits (SDKs) in the SimpleLink MCU family.
Productos y hardware compatibles
Primeros pasos

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
Productos y hardware compatibles
Soporte de software

SMARTRF-STUDIO-8 — Software de aplicación SmartRF Studio 8 para dispositivos CC23xx y CC27xx, y transceptores CC140xP

SmartRF™ Studio es una aplicación para Windows que ayuda a los diseñadores de sistemas de RF a evaluar fácilmente la radio en una etapa temprana del proceso de diseño para todos los dispositivos de RF de baja potencia CC1xxx y CC2xxx de TI. Simplifica la generación de los valores y comandos del (...)

Productos y hardware compatibles
Herramienta de diseño

SIMPLELINK-2-4GHZ-DESIGN-REVIEW — Hardware Design Review Request Form for SimpleLink™ CC2xxx Devices

El proceso de revisión del diseño de hardware de SimpleLink le ofrece la posibilidad de ponerse en contacto, de forma personalizada, con un experto en la materia que puede ayudarlo a revisar su diseño y proporcionarle valiosos comentarios. Aquí encontrará un sencillo proceso de 3 pasos para (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
QFM (MHA) 24 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos