Inicio Interfaz Circuitos integrados Ethernet Capa física (PHY) Ethernet
Inicio
Interfaz
Circuitos integrados Ethernet
Capa física (PHY) Ethernet
NUEVO

DP83TD530-Q1

PRESENTACIÓN PRELIMINAR

Transceptor PMD OA 10BASE-T1S

Haga su pedido ahora
Hoja de datos

DP83TD530-Q1

PRESENTACIÓN PRELIMINAR
Hoja de datos Haga su pedido ahora

Detalles del producto

Datarate (Mbps) 10BASE-T1S Interface type OA 3-pin Rating Automotive Number of ports Single Features IEEE 802.3cg, OA TC14 specification-compliant, Single supply, Wettable flank package I/O supply voltage (typ) (V) 1.8, 2.5, 3.3 Operating temperature range (°C) -40 to 125
Datarate (Mbps) 10BASE-T1S Interface type OA 3-pin Rating Automotive Number of ports Single Features IEEE 802.3cg, OA TC14 specification-compliant, Single supply, Wettable flank package I/O supply voltage (typ) (V) 1.8, 2.5, 3.3 Operating temperature range (°C) -40 to 125
VSON (DRB) 8 9 mm² (3 mm × 3 mm)
  • IEEE 802.3cg compliant 10Mbps 10BASE-T1S
    • Multidrop or point-to-point half-duplex
    • Supports >25m cable and >16 nodes depending on channel
  • Host controller interface: OA compliant 3-pin interface
  • AEC-Q100 qualified for automotive applications:
    • Temperature: –40 to 125°C, TA (grade 1)
  • Single supply operation from 3.3V with 1.8/2.5/3.3V options for I/O voltage
  • OA TC10 local and remote wake-up support
  • Support OA TC14 PHY features when paired with appropriate external host
    • Topology discovery
    • Signal Quality Indicator (SQI)
    • Harness Defect Detection (HDD)
  • Robust PHY architecture with protection and fault detection features
    • Bus wires short to GND or 48V VBAT protection
    • Overtemperature, undervoltage detection
    • ±8kV HBM ESD for MDI pins
    • ±8kV ISO10605 /IEC61000-4-2 ESD contact discharge on MDI pins
    • Extended CMV support for MDI pins
    • OA PMA, and EMC compliant
  • IEEE 802.3cg compliant 10Mbps 10BASE-T1S
    • Multidrop or point-to-point half-duplex
    • Supports >25m cable and >16 nodes depending on channel
  • Host controller interface: OA compliant 3-pin interface
  • AEC-Q100 qualified for automotive applications:
    • Temperature: –40 to 125°C, TA (grade 1)
  • Single supply operation from 3.3V with 1.8/2.5/3.3V options for I/O voltage
  • OA TC10 local and remote wake-up support
  • Support OA TC14 PHY features when paired with appropriate external host
    • Topology discovery
    • Signal Quality Indicator (SQI)
    • Harness Defect Detection (HDD)
  • Robust PHY architecture with protection and fault detection features
    • Bus wires short to GND or 48V VBAT protection
    • Overtemperature, undervoltage detection
    • ±8kV HBM ESD for MDI pins
    • ±8kV ISO10605 /IEC61000-4-2 ESD contact discharge on MDI pins
    • Extended CMV support for MDI pins
    • OA PMA, and EMC compliant

The DP83TD530-Q1 is 10BASE-T1S OA TC-14 compliant PMD transceiver. This device provides full analog front end functionality while relying on the host system for MAC, digital PHY, and management functions. This solution, similar to the CAN transceiver approach, features a simple and cost effective 3-pin clock-less interface between the host controller and the PMD transceiver chip. The device supports 10Mbps multi-drop or point-to-point half-duplex communication over unshielded twisted pair cables with extended common mode voltage (CMV) tolerance. The device communicates to a host controller or switch using OA-3pin interface. The host must have the 10BASE-T1S digital PHY incorporated.

The DP83TD530-Q1 incorporates TC10 wake/sleep features to enable efficient system-level power consumption. The device supports remote wake-up over the Ethernet data line.

The DP83TD530-Q1 is equipped with diagnostic features such as cable fault detection, undervoltage and overtemperature monitoring to streamline system development and maintenance.

The DP83TD530-Q1 is 10BASE-T1S OA TC-14 compliant PMD transceiver. This device provides full analog front end functionality while relying on the host system for MAC, digital PHY, and management functions. This solution, similar to the CAN transceiver approach, features a simple and cost effective 3-pin clock-less interface between the host controller and the PMD transceiver chip. The device supports 10Mbps multi-drop or point-to-point half-duplex communication over unshielded twisted pair cables with extended common mode voltage (CMV) tolerance. The device communicates to a host controller or switch using OA-3pin interface. The host must have the 10BASE-T1S digital PHY incorporated.

The DP83TD530-Q1 incorporates TC10 wake/sleep features to enable efficient system-level power consumption. The device supports remote wake-up over the Ethernet data line.

The DP83TD530-Q1 is equipped with diagnostic features such as cable fault detection, undervoltage and overtemperature monitoring to streamline system development and maintenance.
filter Buscar otro/a Capa física (PHY) Ethernet
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos DP83TD530-Q1 Automotive 10BASE-T1S Multidrop OA PMD Transceiver with TC10 datasheet PDF | HTML 3/12/2025

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DP83TD530EVM — DP83TD530EVM evaluation module

This User’s Guide discusses how to properly operate and configure the DP83TD530EVM. For best layout practices, schematic files, and Bill of Materials, see the associated support documents.

Guía del usuario: PDF | HTML
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VSON (DRB) 8 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos