The following Figure shows how two DRV81646 devices can be connected in daisy chain to leverage GPIO/ isolation saving. SDO pin of one device is fed to the SDI pin of the following device in the chain
To write to two devices , 8 bits of data need to be written as shown in Figure . Note SDO is sent out on Negedge of SCLK. SDO is ready to be sampled on following posedge of SCLK. The value on SDI pin is also sampled on posedge of SCLK. Note Latch need not be brought low to initiate a shift in of data. A posedge of Latch is needed to Latch the data shifted in to Outputs.
The DRV8804 provides a 4-channel low-side driver with overcurrent protection. The device has built-in diodes to clamp turnoff transients generated by inductive loads and can be used to drive unipolar stepper motors, DC motors, relays, solenoids, or other loads.
In the SOIC (DW) package, the DRV8804 can supply up to 1.5A (one channel on) or 800mA (all channels on) continuous output current per channel, at 25°C. In the HTSSOP (PWP) package, the device can supply up to 2A (one channel on) or 1A (four channels on) continuous output current per channel, at 25°C . In the SOT-23-THN (DYZ) package, the DRV8804 can supply up to 1.9A (one channel on) or 900mA (all channels on) continuous output current per chanel, at 25°C with proper PCB heatsinking.
A serial interface is provided including a serial data output, which can be daisy-chained to control multiple devices with one serial interface.
Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature, and faults are indicated by a fault output pin.
The DRV8804 is available in a 20-pin, thermally-enhanced SOIC package , 16-pin HTSSOP package and 16-pin SOT-23-THN package (Eco-friendly: RoHS & no Sb/Br).
| Documentación principal | Tipo | Título | Opciones de formato | Fecha |
|---|---|---|---|---|
| * | Data sheet | DRV8804 Quad Serial Interface Low-Side Driver IC datasheet (Rev. G) | PDF | HTML | 10 dic 2024 |
| Application note | Understanding Motor Driver Current Ratings (Rev. A) | PDF | HTML | 05 jul 2024 | |
| Application note | Using DRV to Drive Solenoids (Rev. A) | PDF | HTML | 24 abr 2022 | |
| Application note | How to Drive Unipolar Stepper Motor with the DRV8xxx | PDF | HTML | 03 dic 2021 | |
| Application note | Best Practices for Board Layout of Motor Drivers (Rev. B) | PDF | HTML | 14 oct 2021 | |
| Application note | Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) | PDF | HTML | 22 jul 2021 | |
| Technical article | Drive unipolar stepper motors as bipolar stepper motors with a simple wiring recon | PDF | HTML | 09 abr 2020 | |
| Application note | PowerPAD™ Thermally Enhanced Package (Rev. H) | 06 jul 2018 | ||
| More literature | TM4C123x Stepper Motor Control Product Summary | 06 jul 2015 | ||
| Application brief | PowerPAD™ Made Easy (Rev. B) | 12 may 2004 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
The DRV8804 evaluation module consists of a quad low-side motor driver with serial control interface that can be used to drive a unipolar stepper motor, up to 4 DC motors or other loads like solenoids. With the DRV8804EVM, designers can quickly and easily evaluate the performance of DRV8804 motor (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| HTSSOP (PWP) | 16 | Ultra Librarian |
| SOIC (DW) | 20 | Ultra Librarian |
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI.