DS125MB203

ACTIVO

Multiplexor y búfer de salida con ventilación con doble puerto y de 12.5 Gbps

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat DS125MB203 Low-Power 12.5-Gbps Dual-Lane 2:1/1:2 Mux/Buffer With Equalization and De-Emphasis datasheet (Rev. C) (Inglés) PDF | HTML

DS125MB203

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Type

Mux Buffer

Number of channels

4

Speed (max) (Gbpp)

12.5

Input compatibility

AC-coupling

Protocols

CPRI, Fibre Channel, General purpose, Infiniband, Interlaken, OBSAI, PCIe1, PCIe2, PCIe3, SAS/SATA, sRIO

Operating temperature range (°C)

-40 to 85

Type

Mux Buffer

Number of channels

4

Speed (max) (Gbpp)

12.5

Input compatibility

AC-coupling

Protocols

CPRI, Fibre Channel, General purpose, Infiniband, Interlaken, OBSAI, PCIe1, PCIe2, PCIe3, SAS/SATA, sRIO

Operating temperature range (°C)

-40 to 85

WQFN (NJY)

54

55 mm² (10 mm × 5.5 mm)

12.5-Gbps Dual Lane 2:1 Mux, 1:2 Switch or
Fanout
Low 390-mW Total Power (Typical)
Advanced Signal Conditioning Features:
- Receive Equalization up to 30 dB at 6.25 GHz
- Transmit De-Emphasis up to –12 dB
- Transmit Output-Voltage Control: 600 mV to
  1300 mV
Programmable Through Pin Selection, EEPROM
or SMBus Interface
Selectable 2.5-V or 3.3-V Supply Voltage
–40°C to +85°C Operating Temperature Range

12.5-Gbps Dual Lane 2:1 Mux, 1:2 Switch or
Fanout
Low 390-mW Total Power (Typical)
Advanced Signal Conditioning Features:
- Receive Equalization up to 30 dB at 6.25 GHz
- Transmit De-Emphasis up to –12 dB
- Transmit Output-Voltage Control: 600 mV to
  1300 mV
Programmable Through Pin Selection, EEPROM
or SMBus Interface
Selectable 2.5-V or 3.3-V Supply Voltage
–40°C to +85°C Operating Temperature Range

The DS125MB203 device is a dual port 2:1 multiplexer and 1:2 switch or fan-out buffer with signal conditioning suitable for 10GE, 10G-KR (802.3ap), Fibre Channel, PCIe, Infiniband, SATA3/SAS2 and other high-speed bus applications with data rates up to 12.5 Gbps. The continuous time linear equalizer (CTLE) of the receiver provides necessary boost to compensate up to 30-inch FR-4 or 8-m cable (AWG-24) at 12.5 Gbps. This on-chip feature eliminates the need for external signal conditioners. The transmitter features a programmable amplitude voltage levels to be selectable from 600 mVp-p to 1300 mVp-p and de-emphasis of up to 12 dB.

The DS125MB203 can be configured to support PCIe, SAS/SATA, 10G-KR or other signaling protocols. When operating in 10G-KR and PCIe Gen-3 mode, the DS125MB203 transparently allows the host controller and the end point to optimize the full link and negotiate transmit equalizer coefficients. This seamless management of the link training protocol ensures system level interoperability with minimum latency.

The programmable settings can be applied through pin settings, SMBus (I²C) protocol or loaded directly from an external EEPROM. When operating in the EEPROM mode, the configuration information is automatically loaded on power up, which eliminates the need for an external microprocessor or software driver.

The DS125MB203 device is a dual port 2:1 multiplexer and 1:2 switch or fan-out buffer with signal conditioning suitable for 10GE, 10G-KR (802.3ap), Fibre Channel, PCIe, Infiniband, SATA3/SAS2 and other high-speed bus applications with data rates up to 12.5 Gbps. The continuous time linear equalizer (CTLE) of the receiver provides necessary boost to compensate up to 30-inch FR-4 or 8-m cable (AWG-24) at 12.5 Gbps. This on-chip feature eliminates the need for external signal conditioners. The transmitter features a programmable amplitude voltage levels to be selectable from 600 mVp-p to 1300 mVp-p and de-emphasis of up to 12 dB.

The DS125MB203 can be configured to support PCIe, SAS/SATA, 10G-KR or other signaling protocols. When operating in 10G-KR and PCIe Gen-3 mode, the DS125MB203 transparently allows the host controller and the end point to optimize the full link and negotiate transmit equalizer coefficients. This seamless management of the link training protocol ensures system level interoperability with minimum latency.

The programmable settings can be applied through pin settings, SMBus (I²C) protocol or loaded directly from an external EEPROM. When operating in the EEPROM mode, the configuration information is automatically loaded on power up, which eliminates the need for an external microprocessor or software driver.

filter

Buscar otro/a Retardadores, redrivers y mux-búferes Ethernet

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 3

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	DS125MB203 Low-Power 12.5-Gbps Dual-Lane 2:1/1:2 Mux/Buffer With Equalization and De-Emphasis datasheet (Rev. C)	PDF \| HTML	31/12/2015
	Nota sobre la aplicación	Extend reach with Ethernet Redrivers and Retimers for 10G-12.5G Applications (Rev. A)		31/01/2023
	Nota sobre la aplicación	Understanding EEPROM Programming for High Speed Repeaters and Mux Buffers		9/10/2014

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Soporte de software