Inicio Interfaz Circuitos integrados PCIe, SAS y SATA

DS160PR410-Q1

ACTIVO

Recontrolador lineal de cuatro canales PCIe 4.0 de 16 Gbps para uso automotriz

Detalles del producto

Type Redriver Protocols CXL, PCIe1, PCIe2, PCIe3, PCIe4, UPI Applications CXL, PCIe, UPI Number of channels 4 Speed (max) (Gbpp) 25 Rating Automotive Operating temperature range (°C) -40 to 125
Type Redriver Protocols CXL, PCIe1, PCIe2, PCIe3, PCIe4, UPI Applications CXL, PCIe, UPI Number of channels 4 Speed (max) (Gbpp) 25 Rating Automotive Operating temperature range (°C) -40 to 125
VQFN (RGF) 40 35 mm² (7 mm × 5 mm)
  • Four-channel linear redriver supporting PCIe® 4.0
    • Backward compatible to PCIe 3.0, 2.0, 1.0
  • Protocol agnostic linear equalizer supporting most AC coupled interfaces up to 20Gbps
  • Integrated two 2x2 Crosspoint mux function
  • 12dB PCIe 4.0 reach extension over PVT with 16dB CTLE boost
  • Ultra-low latency of 100ps
  • Excellent performance at 16Gbps (8GHz Nyquist)
    • -15 / -20dB Rx / Tx return loss
    • 1200mV AC linearity
  • High BW resulting excellent linear EQ curves
  • Single 3.3V supply with 160mW/chan active power
  • Immunity to supply noise with internal voltage regulator
  • Automatic receiver detection for PCIe use cases
  • Linear redriver allows seamless support for PCIe link training
  • Support for x4, x8, x16 bus width in pin mode, and x1, x2, x4, x8, x16 in I2C mode
  • Pin-strap, SMBus or EEPROM programming
    • 18 EQ boost 5 flat gain settings
  • –40 to 105°C (grade 2) ambient temperature support without heatsink
  • 5mm x 7mm automotive friendly package with 0.5 mm pitch and wettable flank
  • Four-channel linear redriver supporting PCIe® 4.0
    • Backward compatible to PCIe 3.0, 2.0, 1.0
  • Protocol agnostic linear equalizer supporting most AC coupled interfaces up to 20Gbps
  • Integrated two 2x2 Crosspoint mux function
  • 12dB PCIe 4.0 reach extension over PVT with 16dB CTLE boost
  • Ultra-low latency of 100ps
  • Excellent performance at 16Gbps (8GHz Nyquist)
    • -15 / -20dB Rx / Tx return loss
    • 1200mV AC linearity
  • High BW resulting excellent linear EQ curves
  • Single 3.3V supply with 160mW/chan active power
  • Immunity to supply noise with internal voltage regulator
  • Automatic receiver detection for PCIe use cases
  • Linear redriver allows seamless support for PCIe link training
  • Support for x4, x8, x16 bus width in pin mode, and x1, x2, x4, x8, x16 in I2C mode
  • Pin-strap, SMBus or EEPROM programming
    • 18 EQ boost 5 flat gain settings
  • –40 to 105°C (grade 2) ambient temperature support without heatsink
  • 5mm x 7mm automotive friendly package with 0.5 mm pitch and wettable flank

The DS160PR410-Q1 is a four channel low-power high-performance linear redriver with integrated two 2x2 cross-point mux designed to support PCIe® 4.0 and other interfaces up to 20Gbps.

The DS160PR410-Q1 receivers deploy continuous time linear equalizers (CTLE) to provide a programmable high-frequency boost. The equalizer can open an input eye that is completely closed due to inter-symbol interference (ISI) induced by an interconnect medium, such as PCB traces. The CTLE receiver is followed by a linear output driver. The linear data-paths of DS160PR410-Q1 preserve transmit preset signal characteristics. The linear redriver becomes part of the passive channel that as a whole get link trained for best transmit and receive equalization settings. This transparency in the link training protocol results in best electrical link and lowest possible latency. Low channel-channel cross-talk, low additive jitter and excellent return loss makes the device almost a passive element in the link, but with its useful equalization. The data-path of the device uses an internally regulated power rail that provides high immunity to any supply noise on the board. The device also has low AC and DC gain variation providing consistent equalization in high volume platform deployment.

The DS160PR410-Q1 is a four channel low-power high-performance linear redriver with integrated two 2x2 cross-point mux designed to support PCIe® 4.0 and other interfaces up to 20Gbps.

The DS160PR410-Q1 receivers deploy continuous time linear equalizers (CTLE) to provide a programmable high-frequency boost. The equalizer can open an input eye that is completely closed due to inter-symbol interference (ISI) induced by an interconnect medium, such as PCB traces. The CTLE receiver is followed by a linear output driver. The linear data-paths of DS160PR410-Q1 preserve transmit preset signal characteristics. The linear redriver becomes part of the passive channel that as a whole get link trained for best transmit and receive equalization settings. This transparency in the link training protocol results in best electrical link and lowest possible latency. Low channel-channel cross-talk, low additive jitter and excellent return loss makes the device almost a passive element in the link, but with its useful equalization. The data-path of the device uses an internally regulated power rail that provides high immunity to any supply noise on the board. The device also has low AC and DC gain variation providing consistent equalization in high volume platform deployment.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos DS160PR410-Q1 PCIe 4.0 Automotive 4-Channel Linear Redriver datasheet PDF | HTML 25/09/2025

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RGF) 40 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos