DS90C031QML-SP

ACTIVO

Controlador de línea diferencial CMOS LVDS cuádruple resistente a la radiación, certif. QML-V

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat DS90C031QML LVDS Quad CMOS Differential Line Driver datasheet (Rev. B) (Inglés)

DS90C031QML-SP

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Function

Driver

Protocols

LVDS

Number of transmitters

4

Number of receivers

0

Signaling rate (Mbps)

155.5

Input signal

TTL

Output signal

LVDS

Rating

Space

Operating temperature range (°C)

-55 to 125

Function

Driver

Protocols

LVDS

Number of transmitters

4

Number of receivers

0

Signaling rate (Mbps)

155.5

Input signal

TTL

Output signal

LVDS

Rating

Space

Operating temperature range (°C)

-55 to 125

CFP (NAC)

16

62.9285 mm² (— mm × — mm)

DIESALE (Y)

—

See data sheet

CFP (NAD)

16

62.9285 mm² (— mm × — mm)

Radiation guaranteed 100 krad(Si)
High impedance LVDS outputs with power-off
±350 mV differential signaling
Low power dissipation
Low differential skew
Low propagation delay
Pin compatible with DS26C31
Compatible with IEEE 1596.3 SCI LVDS standard
Compatible with proposed TIA LVDS standard
Fail safe logic for floating inputs

All trademarks are the property of their respective owners.

Radiation guaranteed 100 krad(Si)
High impedance LVDS outputs with power-off
±350 mV differential signaling
Low power dissipation
Low differential skew
Low propagation delay
Pin compatible with DS26C31
Compatible with IEEE 1596.3 SCI LVDS standard
Compatible with proposed TIA LVDS standard
Fail safe logic for floating inputs

All trademarks are the property of their respective owners.

The DS90C031 is a quad CMOS differential line driver designed for applications requiring ultra low power dissipation and high data rates.

The DS90C031 accepts TTL/CMOS input levels and translates them to low voltage (350 mV) differential output signals. In addition the driver supports a TRI-STATE function that may be used to disable the output stage, thus dropping the device to a low idle power state of 11 mW typical.

In addition, the DS90C031 provides power-off high impedance LVDS outputs. This feature assures minimal loading effect on the LVDS bus lines when V_CC is not present. The DS90C031 and companion line receiver (DS90C032) provide a new alternative to high power psuedo-ECL devices for high speed point-to-point interface applications.

The DS90C031 is a quad CMOS differential line driver designed for applications requiring ultra low power dissipation and high data rates.

The DS90C031 accepts TTL/CMOS input levels and translates them to low voltage (350 mV) differential output signals. In addition the driver supports a TRI-STATE function that may be used to disable the output stage, thus dropping the device to a low idle power state of 11 mW typical.

In addition, the DS90C031 provides power-off high impedance LVDS outputs. This feature assures minimal loading effect on the LVDS bus lines when V_CC is not present. The DS90C031 and companion line receiver (DS90C032) provide a new alternative to high power psuedo-ECL devices for high speed point-to-point interface applications.

filter

Buscar otro/a Circuitos integrados LVDS, M-LVDS y PECL

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

DS90C031QML

ACTIVO

Controlador de línea diferencial CMOS cuádruple LVDS Military rated variant

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 12

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	DS90C031QML LVDS Quad CMOS Differential Line Driver datasheet (Rev. B)		4/03/2013
*	Informe de radiación y confiabilidad	DS90C031xRQMLV TID Report		9/05/2012
*	Informe de radiación y confiabilidad	DS90C031xRQMLV SEE Report		9/05/2012
*	SMD	DS90C031QML-SP SMD 5962-95833		21/06/2016
	Guía de selección	TI Space Products (Rev. L)		27/03/2026
	Application brief	DLA Approved Optimizations for QML Products (Rev. C)	PDF \| HTML	17/06/2025
	Nota sobre la aplicación	Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. B)	PDF \| HTML	10/06/2025
	Más documentación	TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B)		20/02/2025
	Nota sobre la aplicación	Single-Event Effects Confidence Interval Calculations (Rev. A)	PDF \| HTML	19/10/2022
	Application brief	How Far, How Fast Can You Operate LVDS Drivers and Receivers?		3/08/2018
	Application brief	How to Terminate LVDS Connections with DC and AC Coupling		16/05/2018
	Nota sobre la aplicación	AN-1110 LVDS Quad Dynamic I CC vs Frequency		15/05/2004

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación

DS90C031 IBIS Model

SNLM075.ZIP (4 KB) - Modelo IBIS

Productos y hardware compatibles

Descargar

Encapsulado	Pines	Símbolos CAD, huellas y modelos 3D
CFP (NAC)	16	Ultra Librarian
DIESALE (Y)	—	Ultra Librarian
CFP (NAD)	16	Ultra Librarian

Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

DS90C031QML-SP

Controlador de línea diferencial CMOS LVDS cuádruple resistente a la radiación, certif. QML-V

DS90C031QML-SP

Detalles del producto

Productos similares que pueden interesarle

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

Documentación técnica

Diseño y desarrollo

DS90C031 IBIS Model

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Serie de videos

Videos