Inicio Amplificadores Amplificadores diferenciales
Inicio
Amplificadores
Amplificadores diferenciales

INA152

ACTIVO

Amplificador diferencial de alimentación simple

Haga su pedido ahora
Hoja de datos

INA152

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 1 Vs (min) (V) 2.7 Vs (max) (V) 20 CMRR (min) (dB) 80 Common-mode input low (min) (V) -20 Common-mode input high (max) (V) 18 Input offset (±) (max) (V) 0.0015 Iq (typ) (mA) 0.5 Slew rate (typ) (V/µs) 0.4 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 1 Small-signal bandwidth (typ) (Hz) 800000 Rating Catalog Operating temperature range (°C) -40 to 85 Gain drift (max) (ppm/°C) 1 Gain error (±) (max) (%) 0.1
Number of channels 1 Vs (min) (V) 2.7 Vs (max) (V) 20 CMRR (min) (dB) 80 Common-mode input low (min) (V) -20 Common-mode input high (max) (V) 18 Input offset (±) (max) (V) 0.0015 Iq (typ) (mA) 0.5 Slew rate (typ) (V/µs) 0.4 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 1 Small-signal bandwidth (typ) (Hz) 800000 Rating Catalog Operating temperature range (°C) -40 to 85 Gain drift (max) (ppm/°C) 1 Gain error (±) (max) (%) 0.1
VSSOP (DGK) 8 14.7 mm² (3 mm × 4.9 mm)
  • SWING: to Within 200mV of Either Output Rail
  • LOW OFFSET DRIFT: ±3uV/°C
  • LOW OFFSET VOLTAGE: ±250uV
  • HIGH CMR: 94dB
  • LOW GAIN ERROR: 0.01%
  • LOW GAIN ERROR DRIFT: 1ppm/°C
  • WIDE SUPPLY RANGE:
    Single: 2.7V to 20V
    Dual: ±1.35V to ±10V
  • MSOP-8 PACKAGE
  • APPLICATIONS
    • DIFFERENCE INPUT AMPLIFIER BUILDING BLOCK
    • UNITY-GAIN INVERTING AMPLIFIER
    • GAIN = 1/2
    • AMPLIFIER GAIN = 2 AMPLIFIER
    • SUMMING AMPLIFIER
    • SYNCHRONOUS DEMODULATOR
    • CURRENT AND DIFFERENTIAL LINE RECEIVER
    • VOLTAGE-CONTROLLED CURRENT SOURCE
    • BATTERY-POWERED SYSTEMS
    • LOW-COST AUTOMOTIVE INSTRUMEN-TATION
  • SWING: to Within 200mV of Either Output Rail
  • LOW OFFSET DRIFT: ±3uV/°C
  • LOW OFFSET VOLTAGE: ±250uV
  • HIGH CMR: 94dB
  • LOW GAIN ERROR: 0.01%
  • LOW GAIN ERROR DRIFT: 1ppm/°C
  • WIDE SUPPLY RANGE:
    Single: 2.7V to 20V
    Dual: ±1.35V to ±10V
  • MSOP-8 PACKAGE
  • APPLICATIONS
    • DIFFERENCE INPUT AMPLIFIER BUILDING BLOCK
    • UNITY-GAIN INVERTING AMPLIFIER
    • GAIN = 1/2
    • AMPLIFIER GAIN = 2 AMPLIFIER
    • SUMMING AMPLIFIER
    • SYNCHRONOUS DEMODULATOR
    • CURRENT AND DIFFERENTIAL LINE RECEIVER
    • VOLTAGE-CONTROLLED CURRENT SOURCE
    • BATTERY-POWERED SYSTEMS
    • LOW-COST AUTOMOTIVE INSTRUMEN-TATION

The INA152 is a small (MSOP-8), low-power, unity-gain difference amplifier consisting of a CMOS op amp and a precision resistor network. The on-chip resistors are laser trimmed for accurate gain and high common-mode rejection. Excellent TCR tracking of the resistor maintains gain accuracy and common-mode rejection over temperature. The input common-mode voltage range extends to above the positive and negative rails and the output swings to within 50mV of either rail.

The difference amplifier is the foundation of many commonly used circuits. The INA152 provides precision circuit function without using an expensive precision network.

The INA152 is specified for operation over the extended industrial temperature range, \x9640°C to +85°C.

The INA152 is a small (MSOP-8), low-power, unity-gain difference amplifier consisting of a CMOS op amp and a precision resistor network. The on-chip resistors are laser trimmed for accurate gain and high common-mode rejection. Excellent TCR tracking of the resistor maintains gain accuracy and common-mode rejection over temperature. The input common-mode voltage range extends to above the positive and negative rails and the output swings to within 50mV of either rail.

The difference amplifier is the foundation of many commonly used circuits. The INA152 provides precision circuit function without using an expensive precision network.

The INA152 is specified for operation over the extended industrial temperature range, \x9640°C to +85°C.
filter Buscar otro/a Amplificadores diferenciales
Descargar

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
INA132 ACTIVO Amplificador diferencial de baja potencia y alimentación simple Improved offset, lower power consumption

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos Single-Supply Difference Amplifier datasheet 12/01/2001

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​