Inicio Amplificadores Amplificadores diferenciales
Inicio
Amplificadores
Amplificadores diferenciales

INA159-EP

ACTIVO

Amplificador diferencial con traducción de nivel y ganancia de precisión de 0.2 de producto mejorado

Haga su pedido ahora
Hoja de datos

INA159-EP

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 1 Vs (min) (V) 1.8 Vs (max) (V) 5.5 CMRR (min) (dB) 86 Common-mode input low (min) (V) -12.5 Common-mode input high (max) (V) 17.5 Input offset (±) (max) (V) 0.0005 Iq (typ) (mA) 1.1 Slew rate (typ) (V/µs) 15 Voltage gain (min) (V/V) 0.2 Voltage gain (max) (V/V) 0.2 Small-signal bandwidth (typ) (Hz) 1500000 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125 Gain error (±) (max) (%) 0.024
Number of channels 1 Vs (min) (V) 1.8 Vs (max) (V) 5.5 CMRR (min) (dB) 86 Common-mode input low (min) (V) -12.5 Common-mode input high (max) (V) 17.5 Input offset (±) (max) (V) 0.0005 Iq (typ) (mA) 1.1 Slew rate (typ) (V/µs) 15 Voltage gain (min) (V/V) 0.2 Voltage gain (max) (V/V) 0.2 Small-signal bandwidth (typ) (Hz) 1500000 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125 Gain error (±) (max) (%) 0.024
VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Gain of 0.2 to Interface ±10-V Signals to Single-Supply ADCs
  • Gain Accuracy: ±0.024% (max)
  • Wide Bandwidth: 1.5 MHz
  • High Slew Rate: 15 V/µs
  • Low Offset Voltage: ±100 µV
  • Low Offset Drift: ±1.5 µV/°C
  • Single-Supply Operation Down to 1.8 V
  • APPLICATIONS
    • Industrial Process Controls
    • Instrumentation
    • Differential to Single-Ended Conversion
    • Audio Line Receivers
  • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Available in Military (–55°C/125°C) Temperature Range(1)
    • Extended Product Life Cycle
    • Extended Product-Change Notification
    • Product Traceability

(1) Additional temperature ranges are available - contact factory
All other trademarks are the property of their respective owners.
  • Gain of 0.2 to Interface ±10-V Signals to Single-Supply ADCs
  • Gain Accuracy: ±0.024% (max)
  • Wide Bandwidth: 1.5 MHz
  • High Slew Rate: 15 V/µs
  • Low Offset Voltage: ±100 µV
  • Low Offset Drift: ±1.5 µV/°C
  • Single-Supply Operation Down to 1.8 V
  • APPLICATIONS
    • Industrial Process Controls
    • Instrumentation
    • Differential to Single-Ended Conversion
    • Audio Line Receivers
  • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Available in Military (–55°C/125°C) Temperature Range(1)
    • Extended Product Life Cycle
    • Extended Product-Change Notification
    • Product Traceability

(1) Additional temperature ranges are available - contact factory
All other trademarks are the property of their respective owners.

The INA159 is a high slew rate, G = 1/5 difference amplifier consisting of a precision op amp with a precision resistor network. The gain of 1/5 makes the INA159 useful to couple ±10-V signals to single-supply analog-to-digital converters (ADCs), particularly those operating on a single +5-V supply. The on-chip resistors are laser-trimmed for accurate gain and high common-mode rejection. Excellent temperature coefficient of resistance (TCR) tracking of the resistors maintains gain accuracy and common-mode rejection over temperature. The input common-mode voltage range extends beyond the positive and negative supply rails. It operates on a total of 1.8-V to 5.5-V single or split supplies. The INA159 reference input uses two resistors for easy mid-supply or reference biasing.

The difference amplifier is the foundation of many commonly-used circuits. The INA159 provides this circuit function without using an expensive external precision resistor network. The INA159 is available in an MSOP-8 surface-mount package and is specified for operation over the extended industrial temperature range, –55°C to 125°C.

The INA159 is a high slew rate, G = 1/5 difference amplifier consisting of a precision op amp with a precision resistor network. The gain of 1/5 makes the INA159 useful to couple ±10-V signals to single-supply analog-to-digital converters (ADCs), particularly those operating on a single +5-V supply. The on-chip resistors are laser-trimmed for accurate gain and high common-mode rejection. Excellent temperature coefficient of resistance (TCR) tracking of the resistors maintains gain accuracy and common-mode rejection over temperature. The input common-mode voltage range extends beyond the positive and negative supply rails. It operates on a total of 1.8-V to 5.5-V single or split supplies. The INA159 reference input uses two resistors for easy mid-supply or reference biasing.

The difference amplifier is the foundation of many commonly-used circuits. The INA159 provides this circuit function without using an expensive external precision resistor network. The INA159 is available in an MSOP-8 surface-mount package and is specified for operation over the extended industrial temperature range, –55°C to 125°C.
filter Buscar otro/a Amplificadores diferenciales
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet Precision, Gain of 0.2 Level Translation Difference Amplifier datasheet 20 nov 2008
* VID INA159-EP VID V6209613 21 jun 2016
* Radiation & reliability report INA159AMDGKTEP Reliability Report (Rev. A) 05 abr 2012
E-book The Signal e-book: A compendium of blog posts on op amp design topics 28 mar 2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DIP-ADAPTER-EVM — Módulo de evaluación de adaptador DIP

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)

Guía del usuario: PDF
No disponible en TI.com
Modelo de simulación

INA159 and INA159-EP PSpice Model (Rev. B)

SBOC074B.ZIP (27 KB) - PSpice Model
Descargar
Herramienta de cálculo

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

Productos y hardware compatibles

Productos y hardware compatibles
Iniciar Descargar
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® para TI es un entorno de diseño y simulación que ayuda a evaluar la funcionalidad de los circuitos analógicos. Esta completa suite de diseño y simulación utiliza un motor de análisis analógico de Cadence®. Disponible sin ningún costo, PSpice para TI incluye una de las bibliotecas de modelos (...)
Solicitar
Herramienta de simulación

TINA-TI — Programa de simulación analógica basado en SPICE

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Guía del usuario: PDF
View Options
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VSSOP (DGK) 8 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos