Inicio Amplificadores Amplificadores de instrumentación
Inicio
Amplificadores
Amplificadores de instrumentación

INA848

ACTIVO

Amplificador de instrumentación de ancho de banda alto y ruido ultrabajo con ganancia fija de 2000

Haga su pedido ahora
Hoja de datos

INA848

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 1 Vs (max) (V) 36 Vs (min) (V) 8 Input offset (±) (max) (µV) 35 Voltage gain (min) (V/V) 2000 Voltage gain (max) (V/V) 2000 Noise at 1 kHz (typ) (nV√Hz) 1.5 Features Current Feedback, High speed, Super-beta, Ultra-low noise CMRR (min) (dB) 132 Input offset drift (±) (max) (µV/°C) 0.45 Input bias current (±) (max) (nA) 50 Iq (typ) (mA) 6.2 Bandwidth at min gain (typ) (MHz) 2.8 Gain error (±) (max) (%) 0.15 Operating temperature range (°C) -40 to 125 Rating Catalog Type Fixed Gain Gain nonlinearity (±) (max) (%) 0.001 Output swing headroom (to negative supply) (typ) (V) 0.15 Output swing headroom (to positive supply) (typ) (V) -0.15 Input common mode headroom (to negative supply) (typ) (V) 2.5 Input common mode headroom (to positive supply) (typ) (V) -2.5 Noise at 0.1 Hz to 10 Hz (typ) (µVPP) 0.055
Number of channels 1 Vs (max) (V) 36 Vs (min) (V) 8 Input offset (±) (max) (µV) 35 Voltage gain (min) (V/V) 2000 Voltage gain (max) (V/V) 2000 Noise at 1 kHz (typ) (nV√Hz) 1.5 Features Current Feedback, High speed, Super-beta, Ultra-low noise CMRR (min) (dB) 132 Input offset drift (±) (max) (µV/°C) 0.45 Input bias current (±) (max) (nA) 50 Iq (typ) (mA) 6.2 Bandwidth at min gain (typ) (MHz) 2.8 Gain error (±) (max) (%) 0.15 Operating temperature range (°C) -40 to 125 Rating Catalog Type Fixed Gain Gain nonlinearity (±) (max) (%) 0.001 Output swing headroom (to negative supply) (typ) (V) 0.15 Output swing headroom (to positive supply) (typ) (V) -0.15 Input common mode headroom (to negative supply) (typ) (V) 2.5 Input common mode headroom (to positive supply) (typ) (V) -2.5 Noise at 0.1 Hz to 10 Hz (typ) (µVPP) 0.055
SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm)
  • Fixed gain of 2000 V/V
  • Access to internal nodes for filtering
  • Ultra-low noise: 1.5 nV/√Hz input voltage noise (maximum)
  • Precision super-beta input performance:
    • Low offset voltage: 35 µV (maximum)
    • Low offset voltage drift: 0.45 µV/°C (maximum)
    • Low input bias current: 25 nA (typical)
    • Low gain drift: 5 ppm/°C (maximum)
  • Bandwidth: 2.8 MHz
  • Slew rate: 45 V/µs
  • Common-mode rejection: 132 dB (minimum)
  • Supply range:
    • Single supply: 8 V to 36 V
    • Dual supply: ±4 V to ±18 V
  • Specified temperature range: –40°C to +125°C
  • Package: 8-pin SOIC
  • Fixed gain of 2000 V/V
  • Access to internal nodes for filtering
  • Ultra-low noise: 1.5 nV/√Hz input voltage noise (maximum)
  • Precision super-beta input performance:
    • Low offset voltage: 35 µV (maximum)
    • Low offset voltage drift: 0.45 µV/°C (maximum)
    • Low input bias current: 25 nA (typical)
    • Low gain drift: 5 ppm/°C (maximum)
  • Bandwidth: 2.8 MHz
  • Slew rate: 45 V/µs
  • Common-mode rejection: 132 dB (minimum)
  • Supply range:
    • Single supply: 8 V to 36 V
    • Dual supply: ±4 V to ±18 V
  • Specified temperature range: –40°C to +125°C
  • Package: 8-pin SOIC

The INA848 is a fixed-gain instrumentation amplifier optimized for high-precision measurements, such as very-small, fast, differential input signals. TI’s super-beta topology provides a very low input bias current and current noise. The well-matched transistors help achieve a very low offset and offset drift. Matching of the internal resistors yields a high common-mode rejection ratio of 132 dB across the full input-voltage range, and a very low gain drift error of 5 ppm/⁰C (max).

The current-feedback topology of the INA848 produces a wide bandwidth of 2.8 MHz at a fixed gain of 2000, thereby eliminating the need for subsequent gain stages. The very-low noise floor of 1.3 nV/√Hz minimizes the impact on the equivalent number of bits (ENOB) when interfacing with high-resolution analog-to-digital converters (ADCs). The INA848 provides the flexibility of adding filters between the gain stages (pins 2 and 3) to maintain an adequate signal integrity.

These unique features of the INA848 make this device an excellent choice for applications requiring high-precision measurements, such as high-end medical instrumentation, electroencephalography, vibration sensing, and displacement measurements.

This device is designed for 8-V to 36-V single supplies, or ±4-V to ±18-V on dual supplies.

The INA848 is a fixed-gain instrumentation amplifier optimized for high-precision measurements, such as very-small, fast, differential input signals. TI’s super-beta topology provides a very low input bias current and current noise. The well-matched transistors help achieve a very low offset and offset drift. Matching of the internal resistors yields a high common-mode rejection ratio of 132 dB across the full input-voltage range, and a very low gain drift error of 5 ppm/⁰C (max).

The current-feedback topology of the INA848 produces a wide bandwidth of 2.8 MHz at a fixed gain of 2000, thereby eliminating the need for subsequent gain stages. The very-low noise floor of 1.3 nV/√Hz minimizes the impact on the equivalent number of bits (ENOB) when interfacing with high-resolution analog-to-digital converters (ADCs). The INA848 provides the flexibility of adding filters between the gain stages (pins 2 and 3) to maintain an adequate signal integrity.

These unique features of the INA848 make this device an excellent choice for applications requiring high-precision measurements, such as high-end medical instrumentation, electroencephalography, vibration sensing, and displacement measurements.

This device is designed for 8-V to 36-V single supplies, or ±4-V to ±18-V on dual supplies.
filter Buscar otro/a Amplificadores de instrumentación
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
INA849 ACTIVO Amplificador de instrumentación de ruido ultrabajo (1 nV/√Hz), alta velocidad (28 MHz, 35 V/μs) y pr Resistor set gain version
INA851 ACTIVO Amplificador de instrumentación completamente diferencial de alta velocidad (22 MHz) y bajo ruido (3 Fully differential output, overvoltage protection (±60 V) and attenuation gain.

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos INA848 Ultra-Low-Noise (1.5 nV/√Hz), High-Bandwidth Instrumentation Amplifier With Fixed Gain of 2000 datasheet PDF | HTML 24/09/2020
Nota sobre la aplicación Importance of Input Bias Current Return Paths in Instrumentation Amplifier Apps PDF | HTML 27/07/2021
Artículo técnico What is an instrumentation amplifier? PDF | HTML 9/08/2019

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación

INA848 PSpice Model (Rev. B)

SBOMBI4B.ZIP (24 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

INA848 TINA-TI Reference Design

SBOMBI5.TSC (40 KB) - Diseño de referencia TINA-TI
Productos y hardware compatibles
Modelo de simulación

INA848 TINA-TI Spice Model

SBOMBI3.ZIP (23 KB) - Modelo TINA-TI Spice
Productos y hardware compatibles
Herramienta de cálculo

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

La calculadora del ingeniero analógico está diseñada para acelerar muchos de los cálculos repetitivos que los ingenieros de diseño de circuitos analógicos utilizan de forma habitual. Esta herramienta para PC proporciona una interfaz gráfica con una lista de varios cálculos comunes que van desde el (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOIC (D) 8 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos