LM124AQML

ACTIVO

Amplificador operacional de tensión de offset de 3 mV, 32 V, 1 MHz, de grado militar, cuádruple, con

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat LM124AQML LM124QML Low Power Quad Operational Amplifiers datasheet (Rev. K) (Inglés)

LM124AQML

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

32

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

3

Rail-to-rail

In to V-

GBW (typ) (MHz)

1

Slew rate (typ) (V/µs)

1

Vos (offset voltage at 25°C) (max) (mV)

2

Iq per channel (typ) (mA)

0.175

Vn at 1 kHz (typ) (nV√Hz)

40

Rating

Military

Operating temperature range (°C)

-55 to 125

Offset drift (typ) (µV/°C)

7

CMRR (typ) (dB)

85

Iout (typ) (A)

0.06

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

0

Input common mode headroom (to positive supply) (typ) (V)

-3

Output swing headroom (to negative supply) (typ) (V)

0.02

Output swing headroom (to positive supply) (typ) (V)

-3

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

32

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

3

Rail-to-rail

In to V-

GBW (typ) (MHz)

1

Slew rate (typ) (V/µs)

1

Vos (offset voltage at 25°C) (max) (mV)

2

Iq per channel (typ) (mA)

0.175

Vn at 1 kHz (typ) (nV√Hz)

40

Rating

Military

Operating temperature range (°C)

-55 to 125

Offset drift (typ) (µV/°C)

7

CMRR (typ) (dB)

85

Iout (typ) (A)

0.06

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

0

Input common mode headroom (to positive supply) (typ) (V)

-3

Output swing headroom (to negative supply) (typ) (V)

0.02

Output swing headroom (to positive supply) (typ) (V)

-3

CFP (NAD)

14

62.9285 mm² (— mm × — mm)

CDIP (J)

14

130.4652 mm² (— mm × — mm)

DIESALE (Y)

—

See data sheet

CFP (NAC)

14

62.9285 mm² (— mm × — mm)

LCCC (NAJ)

20

79.0321 mm² (— mm × — mm)

Available with Radiation Specification
- High Dose Rate 100 krad(Si)
- ELDRS Free 100 krad(Si)
Internally Frequency Compensated for Unity Gain
Large DC Voltage Gain 100 dB
Wide Bandwidth (Unity Gain) 1 MHz
(Temperature Compensated)
Wide Power Supply Range:
- Single Supply 3V to 32V
- Or Dual Supplies ±1.5V to ±16V
Very Low Supply Current Drain (700 μA) — Essentially Independent of Supply Voltage
Low Input Biasing Current 45 nA
(Temperature Compensated)
Low Input Offset Voltage 2 mV
and Offset Current: 5 nA
Input Common-Mode Voltage Range Includes Ground
Differential Input Voltage Range Equal to the Power Supply Voltage
Large Output Voltage Swing 0V to V⁺ − 1.5V

All trademarks are the property of their respective owners.

Available with Radiation Specification
- High Dose Rate 100 krad(Si)
- ELDRS Free 100 krad(Si)
Internally Frequency Compensated for Unity Gain
Large DC Voltage Gain 100 dB
Wide Bandwidth (Unity Gain) 1 MHz
(Temperature Compensated)
Wide Power Supply Range:
- Single Supply 3V to 32V
- Or Dual Supplies ±1.5V to ±16V
Very Low Supply Current Drain (700 μA) — Essentially Independent of Supply Voltage
Low Input Biasing Current 45 nA
(Temperature Compensated)
Low Input Offset Voltage 2 mV
and Offset Current: 5 nA
Input Common-Mode Voltage Range Includes Ground
Differential Input Voltage Range Equal to the Power Supply Voltage
Large Output Voltage Swing 0V to V⁺ − 1.5V

All trademarks are the property of their respective owners.

The LM124/124A consists of four independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.

Application areas include transducer amplifiers, DC gain blocks and all the conventional op amp circuits which now can be more easily implemented in single power supply systems. For example, the LM124/124A can be directly operated off of the standard +5Vdc power supply voltage which is used in digital systems and will easily provide the required interface electronics without requiring the additional +15Vdc power supplies.

The LM124/124A consists of four independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.

Application areas include transducer amplifiers, DC gain blocks and all the conventional op amp circuits which now can be more easily implemented in single power supply systems. For example, the LM124/124A can be directly operated off of the standard +5Vdc power supply voltage which is used in digital systems and will easily provide the required interface electronics without requiring the additional +15Vdc power supplies.

filter

Buscar otro/a Amplificadores de propósito general

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 4

Documentación principal	Tipo	Título	Fecha
*	Hoja de datos	LM124AQML LM124QML Low Power Quad Operational Amplifiers datasheet (Rev. K)	26/03/2013
*	Informe de radiación y confiabilidad	LM124AxRLQMLV ELDRS Characterization Report	10/05/2012
*	Informe de radiación y confiabilidad	LM124AxRLQMLV SET Testing	10/05/2012
*	SMD	LM124AQML SMD 7704302XA	21/06/2016

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación