LM311

ACTIVO

Comparador diferencial de 30 V de alta velocidad con luces estroboscópicas

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat LM111, LM211, LM311 Differential Comparators datasheet (Rev. K) (Inglés) PDF | HTML

LM311

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of channels

1

Output type

Open-collector, Open-drain

Propagation delay time (µs)

0.115

Vs (max) (V)

30

Vs (min) (V)

3.5

Rating

Catalog

Features

Strobe, Vos Adj Pin

Iq per channel (typ) (mA)

5.1

Vos (offset voltage at 25°C) (max) (mV)

7.5

Rail-to-rail

No

Operating temperature range (°C)

0 to 70

Input bias current (±) (max) (nA)

250

VICR (max) (V)

28

VICR (min) (V)

0.5

Number of channels

1

Output type

Open-collector, Open-drain

Propagation delay time (µs)

0.115

Vs (max) (V)

30

Vs (min) (V)

3.5

Rating

Catalog

Features

Strobe, Vos Adj Pin

Iq per channel (typ) (mA)

5.1

Vos (offset voltage at 25°C) (max) (mV)

7.5

Rail-to-rail

No

Operating temperature range (°C)

0 to 70

Input bias current (±) (max) (nA)

250

VICR (max) (V)

28

VICR (min) (V)

0.5

SOIC (D)

8

29.4 mm² (4.9 mm × 6 mm)

TSSOP (PW)

8

19.2 mm² (3 mm × 6.4 mm)

SOP (PS)

8

48.36 mm² (6.2 mm × 7.8 mm)

PDIP (P)

8

92.5083 mm² (9.81 mm × 9.43 mm)

Fast Response Time: 165 ns
Strobe Capability
Maximum Input Bias Current: 300 nA
Maximum Input Offset Current: 70 nA
Can Operate From Single 5-V Supply
Available in Q-Temp Automotive
- High-Reliability Automotive Applications
- Configuration Control and Print Support
- Qualification to Automotive Standards
On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.

Fast Response Time: 165 ns
Strobe Capability
Maximum Input Bias Current: 300 nA
Maximum Input Offset Current: 70 nA
Can Operate From Single 5-V Supply
Available in Q-Temp Automotive
- High-Reliability Automotive Applications
- Configuration Control and Print Support
- Qualification to Automotive Standards
On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.

The LM111, LM211, and LM311 devices are single high-speed voltage comparators. These devices are designed to operate from a wide range of power-supply voltages, including ±15-V supplies for operational amplifiers and 5-V supplies for logic systems. The output levels are compatible with most TTL and MOS circuits. These comparators are capable of driving lamps or relays and switching voltages up to 50 V at 50 mA. All inputs and outputs can be isolated from system ground. The outputs can drive loads referenced to ground, V_CC+ or V_CC−. Offset balancing and strobe capabilities are available, and the outputs can be wire-OR connected. If the strobe is low, the output is in the off state, regardless of the differential input.

filter

Buscar otro/a Comparadores

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 4

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	LM111, LM211, LM311 Differential Comparators datasheet (Rev. K)	PDF \| HTML	20/01/2017
	Libro electrónico	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	28/03/2017
	Guía del usuario	UCC38C42 30-W Synchronous Buck Converter Reference Design		4/02/2003
	Nota sobre la aplicación	Circuit Techniques for Avoiding Oscillations in Comparator Applications		2/10/2002

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AMP-PDK-EVM — Módulo de evaluación del kit de desarrollo del rendimiento del amplificador

El kit de desarrollo del rendimiento (PDK) del amplificador es un kit de módulo de evaluación (EVM) para probar los parámetros comunes del amplificador operacional y es compatible con la mayoría de los amplificadores operacionales y comparadores. El kit de EVM ofrece una placa principal con varias (...)

Guía del usuario: PDF | HTML

Productos y hardware compatibles

Ver opciones

Modelo de simulación