Inicio Amplificadores Amplificadores operacionales (op amps) Amplificadores de propósito general

LM318

ACTIVO

Amplificador operacional simple de 40 V y 15 MHz

Detalles del producto

Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 40 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Rail-to-rail No GBW (typ) (MHz) 15 Slew rate (typ) (V/µs) 70 Vos (offset voltage at 25°C) (max) (mV) 10 Iq per channel (typ) (mA) 4.5 Vn at 1 kHz (typ) (nV√Hz) 15 Rating Catalog Operating temperature range (°C) 0 to 70 Offset drift (typ) (µV/°C) 6 Input bias current (max) (pA) 500000 CMRR (typ) (dB) 100 Iout (typ) (A) 0.02 Architecture Bipolar Input common mode headroom (to negative supply) (typ) (V) 3.5 Input common mode headroom (to positive supply) (typ) (V) -3.5 Output swing headroom (to negative supply) (typ) (V) 2 Output swing headroom (to positive supply) (typ) (V) -2
Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 40 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Rail-to-rail No GBW (typ) (MHz) 15 Slew rate (typ) (V/µs) 70 Vos (offset voltage at 25°C) (max) (mV) 10 Iq per channel (typ) (mA) 4.5 Vn at 1 kHz (typ) (nV√Hz) 15 Rating Catalog Operating temperature range (°C) 0 to 70 Offset drift (typ) (µV/°C) 6 Input bias current (max) (pA) 500000 CMRR (typ) (dB) 100 Iout (typ) (A) 0.02 Architecture Bipolar Input common mode headroom (to negative supply) (typ) (V) 3.5 Input common mode headroom (to positive supply) (typ) (V) -3.5 Output swing headroom (to negative supply) (typ) (V) 2 Output swing headroom (to positive supply) (typ) (V) -2
PDIP (P) 8 92.5083 mm² (9.81 mm × 9.43 mm) SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm) SOP (PS) 8 48.36 mm² (6.2 mm × 7.8 mm)
  • Small Signal Bandwidth . . . 15 MHz Typ
  • Slew Rate . . . 50 V/µs Min
  • Bias Current . . . 250 nA Max (LM118, LM218)
  • Supply Voltage Range . . . ±5 V to ±20 V
  • Internal Frequency Compensation
  • Input and Output Overload Protection
  • Same Pin Assignments as General-Purpose Operational Amplifiers

The LM118 and LM218 are obsolete and are no longer supplied.

  • Small Signal Bandwidth . . . 15 MHz Typ
  • Slew Rate . . . 50 V/µs Min
  • Bias Current . . . 250 nA Max (LM118, LM218)
  • Supply Voltage Range . . . ±5 V to ±20 V
  • Internal Frequency Compensation
  • Input and Output Overload Protection
  • Same Pin Assignments as General-Purpose Operational Amplifiers

The LM118 and LM218 are obsolete and are no longer supplied.

The LM118, LM218, and LM318 are precision, fast operational amplifiers designed for applications requiring wide bandwidth and high slew rate. They feature a factor-of-ten increase in speed over general-purpose devices without sacrificing dc performance.

These operational amplifiers have internal unity-gain frequency compensation. This considerably simplifies their application because no external components are necessary for operation. However, unlike most internally compensated amplifiers, external frequency compensation may be added for optimum performance. For inverting applications, feed-forward compensation boosts the slew rate to over 150 V/µs and almost double the bandwidth. Overcompensation can be used with the amplifier for greater stability when maximum bandwidth is not needed. Further, a single capacitor can be added to reduce the settling time for 0.1% error band to under 1 µs.

The high speed and fast settling time of these operational amplifiers make them useful in A/D converters, oscillators, active filters, sample-and-hold circuits, and general-purpose amplifiers.

The LM118, LM218, and LM318 are precision, fast operational amplifiers designed for applications requiring wide bandwidth and high slew rate. They feature a factor-of-ten increase in speed over general-purpose devices without sacrificing dc performance.

These operational amplifiers have internal unity-gain frequency compensation. This considerably simplifies their application because no external components are necessary for operation. However, unlike most internally compensated amplifiers, external frequency compensation may be added for optimum performance. For inverting applications, feed-forward compensation boosts the slew rate to over 150 V/µs and almost double the bandwidth. Overcompensation can be used with the amplifier for greater stability when maximum bandwidth is not needed. Further, a single capacitor can be added to reduce the settling time for 0.1% error band to under 1 µs.

The high speed and fast settling time of these operational amplifiers make them useful in A/D converters, oscillators, active filters, sample-and-hold circuits, and general-purpose amplifiers.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Reemplazo con funcionalidad mejorada del dispositivo comparado
OPA992 ACTIVO Amp op de bajo ruido, simple, 40 V, 10,6 MHz, entrada/salida de carril a carril, bajo voltaje de com Single, 40-V, 10.6-MHz, rail-to-rail input/output, low-offset-voltage, low-noise op amp

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 32
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos High-Performance Operational Amplifiers datasheet (Rev. B) 12/02/2002
Nota sobre la aplicación AN-31 Amplifier Circuit Collection (Rev. D) PDF | HTML 21/10/2020
Libro electrónico The Signal e-book: A compendium of blog posts on op amp design topics PDF | HTML 28/03/2017
Nota sobre la aplicación Building an Op Amp With Bipolar Transistors, A Historical Application Note (Rev. A) 19/09/2016
Nota sobre la aplicación AN-256 Circuitry for Inexpensive Relative Humidity Measurement (Rev. B) 6/05/2013
Nota sobre la aplicación AN-262 Applying Dual and Quad FET Op Amps (Rev. B) 6/05/2013
Nota sobre la aplicación Super Matched Bipolar Transistor Pair Sets New Standards for Drift and Noise (Rev. B) 5/05/2013
Nota sobre la aplicación AN-260 A 20-Bit (1 ppm) Linear Slope-Integrating A/D Converter (Rev. B) 5/05/2013
Nota sobre la aplicación AN-30 Log Converters (Rev. B) 1/05/2013
Nota sobre la aplicación AN-29 IC Op Amp Beats FETs on Input Current (Rev. B) 1/05/2013
Nota sobre la aplicación AN-20 An Applications Guide for Op Amps (Rev. C) 1/05/2013
Nota sobre la aplicación AN-4 Monolithic Op Amp—The Universal Linear Component (Rev. B) 1/05/2013
Nota sobre la aplicación AN-79 IC Preamplifier Challenges Choppers on Drift (Rev. B) 1/05/2013
Nota sobre la aplicación AN-278 Designing with a New Super Fast Dual Norton Amplifier (Rev. B) 23/04/2013
Nota sobre la aplicación AN-263 Sine Wave Generation Techniques (Rev. C) 22/04/2013
Nota sobre la aplicación Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B) 22/04/2013
Nota sobre la aplicación Applying a New Precision Op Amp 4/10/2004
Nota sobre la aplicación AN-46 The Phase Locked Loop IC as a Communication System Building Block 14/05/2004
Nota sobre la aplicación AN-480 A 40 MHz Programmable Video Op Amp 11/05/2004
Nota sobre la aplicación AN-32 FET Circuit Applications 10/05/2004
Nota sobre la aplicación AN-446 A 150W IC Op Amp Simplifies Design of Power Circuits 10/05/2004
Nota sobre la aplicación AN-24 A Simplified Test Set for Op Amp Characterization 10/05/2004
Nota sobre la aplicación AN-241 Working with High Impedance Op Amps 3/05/2004
Nota sobre la aplicación Audio Applications of Linear Integrated Circuits 2/05/2004
Nota sobre la aplicación Predicting Op Amp Slew Rate Limited Response 7/10/2002
Nota sobre la aplicación General Purpose Power Supply 3/10/2002
Nota sobre la aplicación Get Fast Stable Response From Improved Unity-Gain Followers 2/10/2002
Nota sobre la aplicación Get More Power Out of Dual or Quad Op-Amps 2/10/2002
Nota sobre la aplicación Precise Tri-Wave Generation 2/10/2002
Nota sobre la aplicación Instrumentational Amplifiers (See also LMP8358) 2/10/2002
Nota sobre la aplicación Low Drift Amplifiers 2/10/2002
Nota sobre la aplicación True RMS Detector 1/10/2002

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AMP-PDK-EVM — Módulo de evaluación del kit de desarrollo del rendimiento del amplificador

El kit de desarrollo del rendimiento (PDK) del amplificador es un kit de módulo de evaluación (EVM) para probar los parámetros comunes del amplificador operacional y es compatible con la mayoría de los amplificadores operacionales y comparadores. El kit de EVM ofrece una placa principal con varias (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
Placa de evaluación

DIP-ADAPTER-EVM — Módulo de evaluación de adaptador DIP

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

LM318 PSpice Model

SLOJ042.ZIP (0 KB) - Modelo PSpice
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
PDIP (P) 8 Ultra Librarian
SOIC (D) 8 Ultra Librarian
SOP (PS) 8 Ultra Librarian

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos