Inicio Administración de potencia Reguladores conmutados CC/CC Controladores de CC/CC

LM3478

ACTIVO

Controlador CC/CC de rango de entrada amplio de 2.97~40 V de e/SEPIC/retorno

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LM5155 ACTIVO Controlador elevador no síncrono MOSFET de 1.5 A y VIN amplia de 2.2 MHz A newer device with up to 2.2-MHz fSW, higher efficiency and up to 45-V input operating voltage.
LM5156H ACTIVO Controlador elevador, de retorno y SEPIC no síncrono con VIN amplia de 2.2 MHz y amplio espectro ale A newer device with up to 2.2-MHz Fsw, higher efficiency, spread spectrum, up to 60-V input operating voltage, and an HTSSOP package.

Detalles del producto

Rating Catalog Topology Boost, Flyback, Forward, SEPIC Vin (max) (V) 40 Vin (min) (V) 2.97 Vout (max) (V) 500 Vout (min) (V) 1.26 Control mode current mode Features Adjustable current limit, Enable, Frequency synchronization, Light-load efficiency, Nonsynchronous rectification, Prebias startup Duty cycle (max) (%) 100 Iq (typ) (A) 0.0027 Operating temperature range (°C) -40 to 125
Rating Catalog Topology Boost, Flyback, Forward, SEPIC Vin (max) (V) 40 Vin (min) (V) 2.97 Vout (max) (V) 500 Vout (min) (V) 1.26 Control mode current mode Features Adjustable current limit, Enable, Frequency synchronization, Light-load efficiency, Nonsynchronous rectification, Prebias startup Duty cycle (max) (%) 100 Iq (typ) (A) 0.0027 Operating temperature range (°C) -40 to 125
SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm) VSSOP (DGK) 8 14.7 mm² (3 mm × 4.9 mm)
  • 8-lead VSSOP-8 and SOIC-8 packages
  • Internal push-pull driver with 1A peak current capability
  • Current limit and thermal shutdown
  • Frequency compensation optimized with a capacitor and a resistor
  • Internal soft start
  • Current mode operation
  • Undervoltage lockout with hysteresis
  • Key specifications:
    • Wide supply voltage range of 2.97V to 40V
    • 100kHz to 1MHz adjustable clock frequency
    • ±2.5% (over temperature) internal reference
    • 10µA shutdown current (over temperature)
  • Create a custom design using the LM3478 with the WEBENCH Power Designer
  • 8-lead VSSOP-8 and SOIC-8 packages
  • Internal push-pull driver with 1A peak current capability
  • Current limit and thermal shutdown
  • Frequency compensation optimized with a capacitor and a resistor
  • Internal soft start
  • Current mode operation
  • Undervoltage lockout with hysteresis
  • Key specifications:
    • Wide supply voltage range of 2.97V to 40V
    • 100kHz to 1MHz adjustable clock frequency
    • ±2.5% (over temperature) internal reference
    • 10µA shutdown current (over temperature)
  • Create a custom design using the LM3478 with the WEBENCH Power Designer

The LM3478 is a versatile Low-Side N-Channel MOSFET controller for switching regulators. It is suitable for use in topologies requiring a low side MOSFET, such as boost, flyback, SEPIC, etc. Moreover, the LM3478 can be operated at extremely high switching frequency in order to reduce the overall solution size. The switching frequency of the LM3478 can be adjusted to any value between 100kHz and 1MHz by using a single external resistor. Current mode control provides superior bandwidth and transient response, besides cycle-by-cycle current limiting. Output current can be programmed with a single external resistor.

The LM3478 has built-in features such as thermal shutdown, short-circuit protection, over voltage protection, etc. Power saving shutdown mode reduces the total supply current to 5µA and allows power supply sequencing. Internal soft-start limits the inrush current at start-up.

The LM3478 is a versatile Low-Side N-Channel MOSFET controller for switching regulators. It is suitable for use in topologies requiring a low side MOSFET, such as boost, flyback, SEPIC, etc. Moreover, the LM3478 can be operated at extremely high switching frequency in order to reduce the overall solution size. The switching frequency of the LM3478 can be adjusted to any value between 100kHz and 1MHz by using a single external resistor. Current mode control provides superior bandwidth and transient response, besides cycle-by-cycle current limiting. Output current can be programmed with a single external resistor.

The LM3478 has built-in features such as thermal shutdown, short-circuit protection, over voltage protection, etc. Power saving shutdown mode reduces the total supply current to 5µA and allows power supply sequencing. Internal soft-start limits the inrush current at start-up.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 11
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos LM3478 High-Efficiency Controller for Boost, SEPIC and Flyback DC-DC Converters datasheet (Rev. Y) PDF | HTML 29/01/2026
Application brief Avoiding Pulse Skip Operation at Light Load Conditions for Asynchronous Boost Converter Designs PDF | HTML 16/09/2025
Nota sobre la aplicación AN-1286 Compensation for the LM3478 Boost Controller (Rev. D) PDF | HTML 9/08/2022
Nota sobre la aplicación LM34xx How to Design Flyback Converter with LM3481 Boost Controller (Rev. A) 8/04/2019
Guía de selección Power Management Guide 2018 (Rev. R) 25/06/2018
Nota sobre la aplicación Softstart Using Constant Current Constant Voltage Approach 24/07/2015
Artículo técnico Portable speaker power: Making the bass possible PDF | HTML 12/05/2015
Nota sobre la aplicación Demystifying Type II and Type III Compensators Using Op-Amp and OTA for DC/DC Co 11/07/2014
Nota sobre la aplicación AN-1484 Designing A SEPIC Converter (Rev. E) 23/04/2013
Nota sobre la aplicación AN-1990 Compensation for Current Mode Control SEPIC Converters (Rev. A) 23/04/2013
Nota sobre la aplicación Modeling & Design of Current Mode Control Boost Converters (Rev. B) 23/04/2013

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LM3478EVAL — Controlador de canal N de lado bajo de alta eficiencia para regulador de conmutación

High Efficiency Low-Side N-Channel Controller for Switching Regulator

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

LM3478 PSpice Average Model

SNVMBH8.ZIP (170 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

LM3478 PSpice Transient Model (Rev. C)

SNVMAW8C.ZIP (124 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

LM3478 TINA-TI Average SEPIC Reference Design (Rev. A)

SNVMB83A.TSC (98 KB) - Diseño de referencia TINA-TI
Productos y hardware compatibles
Modelo de simulación

LM3478 TINA-TI Boost and SEPIC Average Spice Model (Rev. A)

SNVMB84A.ZIP (9 KB) - Modelo TINA-TI Spice
Productos y hardware compatibles
Modelo de simulación

LM3478 Unencrypted PSpice Average Model

SNVMBL8.ZIP (2 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

LM3478 Unencrypted PSpice Transient Model (Rev. B)

SNVMAW9B.ZIP (5 KB) - Modelo PSpice
Productos y hardware compatibles
Herramienta de cálculo

FLYBUCK-FLYBACK-DESIGN-CALC — Flybuck / Flyback Calculator

Esta herramienta ayuda a un ingeniero de fuentes de alimentación a seleccionar la topología CC-CC aislada adecuada en función de las especificaciones. Según la topología elegida, la calculadora también recomienda el CI adecuado para el diseño.

Productos y hardware compatibles
Herramienta de cálculo

LM3478-88-BOOST-CALC — LM3478-88 quick start calculator for boost

LM3478-88 quick start calculator for boost topology
Productos y hardware compatibles
Herramienta de cálculo

LM3478-88-FLYBACK-CALC — LM3478-88 quick start calculator for Flyback

The LM3478-88 Flyback quick start calculator tool assists in the configuration of the power stage and the external components for the LM3478 and LM3488 devices
Productos y hardware compatibles
Herramienta de cálculo

LM3478-88-SEPIC-CALC — LM3478-88 quick start calculator for SEPIC

The LM3478-88 SEPIC quick start calculator tool assists in the configuration of the power stage and the external components for the LM3478 and LM3488.
Productos y hardware compatibles
Diseño de referencia

PMP10077 — Diseño de referencia de convertidor boost de 2 W y alta relación de voltaje Vout/Vin

When high voltage ratio between output and input is required, it's always difficult to choose the right topology. In this case, the most-simple Boost has been selected due to cost reasons. The converter runs in DCM mode therefore avoiding the Trr of the diode and shows good efficiency.

Productos y hardware compatibles
Diseño de referencia

TIDA-010046 — Diseño de referencia de PHY Ethernet de 10/100 Mbps compatible con EMC con PoE-PD de IEEE802.3at de

Este diseño de referencia está optimizado para 10 a 100 Mbps utilizando la capa física Ethernet (PHY) DP83825 de baja potencia que admite un alcance de 150 m sobre un cable CAT5e, lo que supera la limitación de distancia de Ethernet estándar de 100 m (328 pies). Este diseño tiene suministro de (...)

Productos y hardware compatibles
Diseño de referencia

TIDA-01373 — Diseño de referencia de la herramienta de programación EEPROM

El TIDA-01373 es un ejemplo de hardware y software de referencia de una herramienta de programación escalable para los controladores de motores BLDC integrados DRV10983, DRV10975, DRV10983-Q1 y DRV10987. Estos dispositivos cuentan con registros EEPROM configurables que deben establecerse en (...)
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOIC (D) 8 Ultra Librarian
VSSOP (DGK) 8 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos