Inicio Administración de potencia Interruptores y controladores de protección de potencia Controladores de intercambio en caliente
Inicio
Administración de potencia
Interruptores y controladores de protección de potencia
Controladores de intercambio en caliente
NUEVO

LMI800

PRESENTACIÓN PRELIMINAR
Haga su pedido ahora
Hoja de datos

LMI800

PRESENTACIÓN PRELIMINAR
Hoja de datos Haga su pedido ahora

Detalles del producto

Vabsmax_cont (V) 1500 Vin (max) (V) 400, 800 Vin (min) (V) -400, 0 Features Adjustable OVLO, Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Integrated EEPROM, Overvoltage protection, PMBus, Power good signal, Reinforced isolation, Short circuit protection, adjustable UVLO Overcurrent response Circuit breaker Fault response Auto-retry Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.065 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
Vabsmax_cont (V) 1500 Vin (max) (V) 400, 800 Vin (min) (V) -400, 0 Features Adjustable OVLO, Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Integrated EEPROM, Overvoltage protection, PMBus, Power good signal, Reinforced isolation, Short circuit protection, adjustable UVLO Overcurrent response Circuit breaker Fault response Auto-retry Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.065 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
SSOP (DFP) 40 109.695 mm² (10.65 mm × 10.3 mm)
  • Isolated floating hotswap controller

    • Support 2-wire, 3-wire system architectures with high and low-side configurations

  • Integrated Isolated Power Supply for hotswap controller bias
  • GND referrenced signals with Reinforced insulation to 800V
    • PGOOD, Fault assertion on SMBA and PMBus Telemetry

  • Robust isolation barrier:

    • High lifetime at up to 1000VDC working voltage

    • Up to 5000VRMS isolation rating

    • Up to 10.4kV surge capability

  • SYNC pin for coordination between high and low side hotswap controllers

  • DISC pin for output capacitor discharge control

  • Strong gate pull down (1.2A) for fast turn OFF
  • Robust short circuit protection (360ns)
  • Failed FET detection
  • Programable UV, OV, tFAULT thresholds
  • External FET temperature sensing
  • PMBus® interface for telemetry, control, configuration and debug
    • On chip EEPROM nonvolatile memory for configuration
    • Precision VIN, VOUT, IIN, PIN, VAUX monitoring V (<±1.5%); I (<±1%); P (<±2%)
    • Power cycle with a single command
    • Blackbox fault recording of multiple events with relative time stamp stored in internal EEPROM
  • 12-bit ADC with 250kHz sampling rate
  • –40°C < TJ < 125°C operation
  • Isolated floating hotswap controller

    • Support 2-wire, 3-wire system architectures with high and low-side configurations

  • Integrated Isolated Power Supply for hotswap controller bias
  • GND referrenced signals with Reinforced insulation to 800V
    • PGOOD, Fault assertion on SMBA and PMBus Telemetry

  • Robust isolation barrier:

    • High lifetime at up to 1000VDC working voltage

    • Up to 5000VRMS isolation rating

    • Up to 10.4kV surge capability

  • SYNC pin for coordination between high and low side hotswap controllers

  • DISC pin for output capacitor discharge control

  • Strong gate pull down (1.2A) for fast turn OFF
  • Robust short circuit protection (360ns)
  • Failed FET detection
  • Programable UV, OV, tFAULT thresholds
  • External FET temperature sensing
  • PMBus® interface for telemetry, control, configuration and debug
    • On chip EEPROM nonvolatile memory for configuration
    • Precision VIN, VOUT, IIN, PIN, VAUX monitoring V (<±1.5%); I (<±1%); P (<±2%)
    • Power cycle with a single command
    • Blackbox fault recording of multiple events with relative time stamp stored in internal EEPROM
  • 12-bit ADC with 250kHz sampling rate
  • –40°C < TJ < 125°C operation

The LMI800PS is high voltage isolated floating hotswap controller designed to support 2-wire and 3-wire system architecture with high and low side configuration for server and datacentres. This device requires only single power supply input referred to user ground and utlizes inbuilt isolated power supply for the hotswap controller bias. All user interface are reinforced isolated to 800V and ensured alignment with UL safety standards.

The LMI800PS comes with SYNC pin for coordination between high and low side hotswap controllers which provides user a liberty to optimize the FET rating. The DISC pin provides control feature to discharge the output load capacitor during system plug out.

It has Programmable power limit threshold along with adjustable fault time (tFAULT) which further limits maximum power dissipation and ensure FET SOA protection under all critical events.

An integrated PMBus™interface enables remote monitoring, control, and configuration of the system in real time. Key parameters can be accessed remotely for telemetry, and various thresholds can be configured through PMBus or stored in internal non volatile memory.

The LMI800PS is high voltage isolated floating hotswap controller designed to support 2-wire and 3-wire system architecture with high and low side configuration for server and datacentres. This device requires only single power supply input referred to user ground and utlizes inbuilt isolated power supply for the hotswap controller bias. All user interface are reinforced isolated to 800V and ensured alignment with UL safety standards.

The LMI800PS comes with SYNC pin for coordination between high and low side hotswap controllers which provides user a liberty to optimize the FET rating. The DISC pin provides control feature to discharge the output load capacitor during system plug out.

It has Programmable power limit threshold along with adjustable fault time (tFAULT) which further limits maximum power dissipation and ensure FET SOA protection under all critical events.

An integrated PMBus™interface enables remote monitoring, control, and configuration of the system in real time. Key parameters can be accessed remotely for telemetry, and various thresholds can be configured through PMBus or stored in internal non volatile memory.

filter Buscar otro/a Controladores de intercambio en caliente
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos LMI800PS High Voltage Isolated Hotswap Controller with PMBus Interface datasheet PDF | HTML 6/10/2026
Informe Hot-Swap Solutions for High-Voltage DC-Powered AI Servers PDF | HTML 8/10/2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LMI800PSEVM — Módulo de evaluación LMI800

El módulo de evaluación (EVM) LMI800PS contiene circuitos de evaluación y referencia para el controlador de intercambio en caliente LMI800PS. El dispositivo LMI800PS combina un controlador de intercambio en caliente de alto rendimiento con una interfaz PMBus para medir, proteger y controlar con (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SSOP (DFP) 40 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos