Inicio Administración de potencia Reguladores conmutados CC/CC Convertidores de CC/CC
Inicio
Administración de potencia
Reguladores conmutados CC/CC
Convertidores de CC/CC
NUEVO

LMR70410-Q1

PRESENTACIÓN PRELIMINAR
Haga su pedido ahora
Hoja de datos

LMR70410-Q1

PRESENTACIÓN PRELIMINAR
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Topology Buck Iout (max) (A) 1 Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 28 Vout (min) (V) 0.8 Features Enable, Forced PWM, Light-load efficiency, Overcurrent protection, Pre-bias startup, Synchronous rectification, UVLO fixed Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000005 Duty cycle (max) (%) 98 TI functional safety category Functional Safety-Capable
Rating Catalog Topology Buck Iout (max) (A) 1 Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 28 Vout (min) (V) 0.8 Features Enable, Forced PWM, Light-load efficiency, Overcurrent protection, Pre-bias startup, Synchronous rectification, UVLO fixed Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000005 Duty cycle (max) (%) 98 TI functional safety category Functional Safety-Capable
SOT-23-THN (DDC) 6 8.12 mm² (2.9 mm × 2.8 mm)
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40ºC to 125ºC ambient operating temperature range
  • Configured for rugged automotive applications
    • 4V to 40V input voltage range
    • 1A continuous output current
    • 60ns minimum on-time
    • 2.1MHz fixed switching frequency
    • –40ºC to 150ºC junction temperature range
    • Cycle-by-cycle short-circuit protection
    • Precision enable
    • ±1% voltage reference accuracy
    • 1.8ms internal soft start
  • Small design size and ease of use
    • Integrated synchronous rectification
    • Internal compensation for ease of use
    • SOT23-6 package
  • Forced pulse width modulation (FPWM) and pulse frequency modulation (PFM) modes available
  • Pin-to-pin compatibility with existing SOT23-6 devices
    • LMR50410-Q1, TPS560430-Q1
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40ºC to 125ºC ambient operating temperature range
  • Configured for rugged automotive applications
    • 4V to 40V input voltage range
    • 1A continuous output current
    • 60ns minimum on-time
    • 2.1MHz fixed switching frequency
    • –40ºC to 150ºC junction temperature range
    • Cycle-by-cycle short-circuit protection
    • Precision enable
    • ±1% voltage reference accuracy
    • 1.8ms internal soft start
  • Small design size and ease of use
    • Integrated synchronous rectification
    • Internal compensation for ease of use
    • SOT23-6 package
  • Forced pulse width modulation (FPWM) and pulse frequency modulation (PFM) modes available
  • Pin-to-pin compatibility with existing SOT23-6 devices
    • LMR50410-Q1, TPS560430-Q1

LMR70410-Q1 is a 40V, 1A synchronous buck switching regulator in an easy to use SOT23-6 package. LMR70410-Q1 can deliver up to 1A DC load current in a small design size and can operate between 4V to 40V DC supply voltage. LMR70410-Q1 operates at a fixed 2.1MHz switching frequency to support the use of relatively small inductors to optimize overall design size.

LMR70410-Q1 features precision enable UVLO which allows the designer to program the input voltage at which the device is turned on or off through the use of a resistor divider between VIN and GND. LMR70410-Q1 implements cycle-by-cycle overcurrent protection which limits the maximum output current even as the output voltage falls to zero. Thermal shutdown is implemented to turn off the LMR70410-Q1 if the junction temperature exceeds the thermal shutdown threshold.

LMR70410-Q1 features both FPWM and PFM variants allowing designs to be optimized for either fixed frequency across load or higher light load efficiency. The internal soft-start time is set internally to be 1.8ms (typical).

LMR70410-Q1 is part of a family of pin-to-pin devices that support load currents ranging from 0.6A to 1A. This family is pin-to-pin compatible with other SOT23-6 devices, such as TPS560430-Q1 and LMR50410-Q1.

LMR70410-Q1 is a 40V, 1A synchronous buck switching regulator in an easy to use SOT23-6 package. LMR70410-Q1 can deliver up to 1A DC load current in a small design size and can operate between 4V to 40V DC supply voltage. LMR70410-Q1 operates at a fixed 2.1MHz switching frequency to support the use of relatively small inductors to optimize overall design size.

LMR70410-Q1 features precision enable UVLO which allows the designer to program the input voltage at which the device is turned on or off through the use of a resistor divider between VIN and GND. LMR70410-Q1 implements cycle-by-cycle overcurrent protection which limits the maximum output current even as the output voltage falls to zero. Thermal shutdown is implemented to turn off the LMR70410-Q1 if the junction temperature exceeds the thermal shutdown threshold.

LMR70410-Q1 features both FPWM and PFM variants allowing designs to be optimized for either fixed frequency across load or higher light load efficiency. The internal soft-start time is set internally to be 1.8ms (typical).

LMR70410-Q1 is part of a family of pin-to-pin devices that support load currents ranging from 0.6A to 1A. This family is pin-to-pin compatible with other SOT23-6 devices, such as TPS560430-Q1 and LMR50410-Q1.
filter Buscar otro/a Convertidores de CC/CC
Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos LMR70410-Q1 4V to 40V, 1A Automotive Synchronous Buck Converter datasheet PDF | HTML 9/10/2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LMR70410QEVM — Módulo de evaluación LMR70410-Q1

El módulo de evaluación (EVM) LMR70410-Q1 proporciona un esquema funcional y una plataforma para evaluar el rendimiento de la familia de dispositivos LMR704XX-Q1. El EVM funciona en un amplio rango de tensión de entrada de 5.5 V a 40 V, lo que proporciona una salida regulada de 5 V. Este EVM está (...)
Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOT-23-THN (DDC) 6 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos