Inicio Amplificadores Amplificadores operacionales (op amps) Amplificadores de propósito general
Inicio
Amplificadores
Amplificadores operacionales (op amps)
Amplificadores de propósito general

OPA2107

COMPRA POR ÚLTIMA VEZ

Amplificador operacional doble, 30 V, 4,5 MHz

Haga su pedido ahora
Hoja de datos
OPA2107 está en proceso de ser discontinuado
Este producto está en proceso de ser suspendido. Los nuevos diseños deben considerar un producto alternativo.
open-in-new Comparar alternativas
Reemplazo con funcionalidad mejorada del dispositivo comparado
OPA2991 ACTIVO Amplificador operacional doble, 40 V, 4.5 MHz, de baja potencia Pin-to-pin upgrade with improved performance: higher bandwidth (4.5 MHz), RRIO, lower Vos (0.75 mV), higher slew rate (21 V/us) and higher output current (75 mA)

OPA2107

COMPRA POR ÚLTIMA VEZ
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 9 Rail-to-rail No GBW (typ) (MHz) 4.5 Slew rate (typ) (V/µs) 18 Vos (offset voltage at 25°C) (max) (mV) 1 Iq per channel (typ) (mA) 4.5 Vn at 1 kHz (typ) (nV√Hz) 9 Rating Catalog Operating temperature range (°C) -25 to 85 Offset drift (typ) (µV/°C) 3 Input bias current (max) (pA) 10 CMRR (typ) (dB) 94 Iout (typ) (A) 0.04 Architecture FET Input common mode headroom (to negative supply) (typ) (V) 4.5 Input common mode headroom (to positive supply) (typ) (V) -4.5 Output swing headroom (to negative supply) (typ) (V) 4 Output swing headroom (to positive supply) (typ) (V) -3
Number of channels 2 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 9 Rail-to-rail No GBW (typ) (MHz) 4.5 Slew rate (typ) (V/µs) 18 Vos (offset voltage at 25°C) (max) (mV) 1 Iq per channel (typ) (mA) 4.5 Vn at 1 kHz (typ) (nV√Hz) 9 Rating Catalog Operating temperature range (°C) -25 to 85 Offset drift (typ) (µV/°C) 3 Input bias current (max) (pA) 10 CMRR (typ) (dB) 94 Iout (typ) (A) 0.04 Architecture FET Input common mode headroom (to negative supply) (typ) (V) 4.5 Input common mode headroom (to positive supply) (typ) (V) -4.5 Output swing headroom (to negative supply) (typ) (V) 4 Output swing headroom (to positive supply) (typ) (V) -3
SOIC (D) 8 29.4 mm² 4.9 x 6
  • Very Low Noise: 8nV/Hz at 10kHz
  • Low VOS: 1mV max
  • Low Drift: 10 µV/°C max
  • Low IB: 10pA max
  • Fast Settling Time: 2 µs to 0.01%
  • Unity-Gain Stable
  • APPLICATIONS
    • Data Acquisition
    • DAC Output Amplifiers
    • Optoelectronics
    • High-Impedance Sensor Amps
    • High-Performance Audio Circuitry
    • Medical Equipment, CT Scanners

All trademarks are the property of their respective owners.
  • Very Low Noise: 8nV/Hz at 10kHz
  • Low VOS: 1mV max
  • Low Drift: 10 µV/°C max
  • Low IB: 10pA max
  • Fast Settling Time: 2 µs to 0.01%
  • Unity-Gain Stable
  • APPLICATIONS
    • Data Acquisition
    • DAC Output Amplifiers
    • Optoelectronics
    • High-Impedance Sensor Amps
    • High-Performance Audio Circuitry
    • Medical Equipment, CT Scanners

All trademarks are the property of their respective owners.

The OPA2107 dual operational amplifier provides precision Difet performance with the cost and space savings of a dual op amp. It is useful in a wide range of precision and low-noise analog circuitry and can be used to upgrade the performance of designs currently using BIFET® type amplifiers.

The OPA2107 is fabricated on a proprietary dielectrically isolated (Difet) process. This holds input bias currents to very low levels without sacrificing other important parameters, such as input offset voltage, drift and noise. Laser-trimmed input circuitry yields excellent dc performance. Superior dynamic performance is achieved, yet quiescent current is held to under 2.5mA per amplifier. The OPA2107 is unity-gain stable.

The OPA2107 is available in DIP-8 and SO-8 packages.

The OPA2107 dual operational amplifier provides precision Difet performance with the cost and space savings of a dual op amp. It is useful in a wide range of precision and low-noise analog circuitry and can be used to upgrade the performance of designs currently using BIFET® type amplifiers.

The OPA2107 is fabricated on a proprietary dielectrically isolated (Difet) process. This holds input bias currents to very low levels without sacrificing other important parameters, such as input offset voltage, drift and noise. Laser-trimmed input circuitry yields excellent dc performance. Superior dynamic performance is achieved, yet quiescent current is held to under 2.5mA per amplifier. The OPA2107 is unity-gain stable.

The OPA2107 is available in DIP-8 and SO-8 packages.
filter Buscar otro/a Amplificadores de propósito general
Descargar

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet Precision Dual Difet® Operational Amplifier datasheet (Rev. A) 04 jun 2003

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje