NUEVO

OPA2596

ACTIVO

Amp. operac. de precisión de 85 V, doble canal, alta relación velocidad/potencia (100 V/µs a 400 µA)

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat OPAx596 High-Voltage (85V), Low-Power (420μA), High-Slew Rate (100V/μs) Power Amplifier With MUX-Friendly Inputs datasheet (Rev. C) (Inglés) PDF | HTML

OPA2596

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

85

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

8

Vos (offset voltage at 25°C) (max) (mV)

1

Offset drift (typ) (µV/°C)

1

Input bias current (max) (pA)

15

GBW (typ) (MHz)

2.25

Slew rate (typ) (V/µs)

100

Rail-to-rail

In to V-, Out

Iq per channel (typ) (mA)

0.425

Vn at 1 kHz (typ) (nV√Hz)

12.9

CMRR (typ) (dB)

140

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Iout (typ) (A)

0.03

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

85

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

8

Vos (offset voltage at 25°C) (max) (mV)

1

Offset drift (typ) (µV/°C)

1

Input bias current (max) (pA)

15

GBW (typ) (MHz)

2.25

Slew rate (typ) (V/µs)

100

Rail-to-rail

In to V-, Out

Iq per channel (typ) (mA)

0.425

Vn at 1 kHz (typ) (nV√Hz)

12.9

CMRR (typ) (dB)

140

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Iout (typ) (A)

0.03

VSSOP (DGK)

8

14.7 mm² (3 mm × 4.9 mm)

SOIC (D)

8

29.4 mm² (4.9 mm × 6 mm)

High slew rate: 100V/µs
Low power consumption: 420µA
Wide power-supply range:
- ±4V to ±42.5V
- 8V to 85V
MUX-friendly inputs
Input below the negative rail
Rail-to-rail output
Gain bandwidth: 3.75MHz
Low noise: 12.8nV/√Hz
Low input bias current: 5pA
Low input offset voltage: ±1mV
Output current drive: ±30mA
Wide temperature range: –40°C to +125°C
Industry-standard small packages:
- D (8-pin SOIC)
- DBV (5-pin SOT-23)
- DGK (8-pin VSSOP)

High slew rate: 100V/µs
Low power consumption: 420µA
Wide power-supply range:
- ±4V to ±42.5V
- 8V to 85V
MUX-friendly inputs
Input below the negative rail
Rail-to-rail output
Gain bandwidth: 3.75MHz
Low noise: 12.8nV/√Hz
Low input bias current: 5pA
Low input offset voltage: ±1mV
Output current drive: ±30mA
Wide temperature range: –40°C to +125°C
Industry-standard small packages:
- D (8-pin SOIC)
- DBV (5-pin SOT-23)
- DGK (8-pin VSSOP)

The OPA596 and OPA2596 (OPAx596) are high-voltage (85V), high slew rate (100V/µs), micro-power (420µA), unity-gain stable operational amplifiers.

The OPAx596 enable the next generation of high-voltage systems, such as output load drivers in semiconductor test and digital power supplies by increasing the output voltage of the system though high-gain configurations. Low power consumption and industry-standard small packages allow the device to be used in high-density systems that are size constrained, while reducing the thermal management requirements for the system.

Through proprietary design techniques, the OPAx596 are capable of a very high slew rate with minimal power consumption to improve large-signal settling time and maximize the effective large-signal bandwidth. These devices also offers MUX-friendly inputs that enable large differential voltage (up to 85V) and help improve settling behavior when compared to traditional inputs in multiplexed applications.

The OPAx596 are available in industry-standard packages and operates across the temperature range of –40°C to +125°C.

The OPA596 and OPA2596 (OPAx596) are high-voltage (85V), high slew rate (100V/µs), micro-power (420µA), unity-gain stable operational amplifiers.

The OPAx596 enable the next generation of high-voltage systems, such as output load drivers in semiconductor test and digital power supplies by increasing the output voltage of the system though high-gain configurations. Low power consumption and industry-standard small packages allow the device to be used in high-density systems that are size constrained, while reducing the thermal management requirements for the system.

Through proprietary design techniques, the OPAx596 are capable of a very high slew rate with minimal power consumption to improve large-signal settling time and maximize the effective large-signal bandwidth. These devices also offers MUX-friendly inputs that enable large differential voltage (up to 85V) and help improve settling behavior when compared to traditional inputs in multiplexed applications.

The OPAx596 are available in industry-standard packages and operates across the temperature range of –40°C to +125°C.

filter

Buscar otro/a Amplificadores operacionales de precisión (Vos <1 mV)

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Reemplazo con funcionalidad mejorada del dispositivo comparado

NUEVO OPA2591

PRESENTACIÓN PRELIMINAR

Amp. de precisión de 85 V (100µV de compensación), alta relación vel./potencia (100 V/µs a 400 µA Higher precision variant with lower offset voltage (0.1mV) and offset voltage drift (0.3µV/°C)

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

Documentación principal	Tipo	Título	Opciones de formato	Descargar la versión más reciente en inglés	Fecha
*	Hoja de datos	OPAx596 High-Voltage (85V), Low-Power (420μA), High-Slew Rate (100V/μs) Power Amplifier With MUX-Friendly Inputs datasheet (Rev. C)	PDF \| HTML		22/12/2025
	Application brief	Biasing an APD With OPA596	PDF \| HTML		9/02/2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DIYAMP-EVM — Módulo de evaluación de circuito de amplificador universal “Hazlo tú mismo (DIY)”

El DIYAMP-EVM es una familia de módulos de evaluación (EVM) que proporciona a ingenieros y aficionados al DIY con circuitos de amplificación reales, lo que permite evaluar rápidamente conceptos de diseño y verificar simulaciones. Está disponible en tres encapsulados estándar de la industria (SC70, (...)

Guía del usuario: PDF | HTML