OPA2832

ACTIVO

Amplificador operacional doble, de baja potencia, de alta velocidad y de ganancia fija

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat Dual, Low-Power, High-Speed, Fixed-Gain Operational Amplifier datasheet (Rev. C) (Inglés)

OPA2832

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Architecture

Fixed Gain/Buffer

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.8

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

11

GBW (typ) (MHz)

250

BW at Acl (MHz)

250

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

300

Vn at flatband (typ) (nV√Hz)

9.3

Vn at 1 kHz (typ) (nV√Hz)

9.2

Iq per channel (typ) (mA)

4.25

Vos (offset voltage at 25°C) (max) (mV)

7.5

Rail-to-rail

In to V-, Out

Rating

Catalog

Operating temperature range (°C)

-40 to 85

CMRR (typ) (dB)

72

Input bias current (max) (pA)

10000000

Offset drift (typ) (µV/°C)

27

Iout (typ) (mA)

75

2nd harmonic (dBc)

64

3rd harmonic (dBc)

57

Frequency of harmonic distortion measurement (MHz)

5

Architecture

Fixed Gain/Buffer

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.8

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

11

GBW (typ) (MHz)

250

BW at Acl (MHz)

250

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

300

Vn at flatband (typ) (nV√Hz)

9.3

Vn at 1 kHz (typ) (nV√Hz)

9.2

Iq per channel (typ) (mA)

4.25

Vos (offset voltage at 25°C) (max) (mV)

7.5

Rail-to-rail

In to V-, Out

Rating

Catalog

Operating temperature range (°C)

-40 to 85

CMRR (typ) (dB)

72

Input bias current (max) (pA)

10000000

Offset drift (typ) (µV/°C)

27

Iout (typ) (mA)

75

2nd harmonic (dBc)

64

3rd harmonic (dBc)

57

Frequency of harmonic distortion measurement (MHz)

5

SOIC (D)

8

29.4 mm² 4.9 x 6

VSSOP (DGK)

8

14.7 mm² 3 x 4.9

HIGH BANDWIDTH: 75MHz (G = +2)
LOW SUPPLY CURRENT: 7.8mA (V_S = +5V)
FLEXIBLE SUPPLY RANGE:
±1.5V to ±5.5V Dual Supply
+3V to +11V Single Supply
INPUT RANGE INCLUDES GROUND ON SINGLE SUPPLY
4.9V_PP OUTPUT SWING ON +5V SUPPLY
HIGH SLEW RATE: 350V/µs
LOW INPUT VOLTAGE NOISE: 9.3nV/Hz
APPLICATIONS
- SINGLE-SUPPLY VIDEO LINE DRIVERS
- CCD IMAGING CHANNELS
- LOW-POWER ULTRASOUND
- PORTABLE CONSUMER ELECTRONICS

All other trademarks are the property of their respective owners.

HIGH BANDWIDTH: 75MHz (G = +2)
LOW SUPPLY CURRENT: 7.8mA (V_S = +5V)
FLEXIBLE SUPPLY RANGE:
±1.5V to ±5.5V Dual Supply
+3V to +11V Single Supply
INPUT RANGE INCLUDES GROUND ON SINGLE SUPPLY
4.9V_PP OUTPUT SWING ON +5V SUPPLY
HIGH SLEW RATE: 350V/µs
LOW INPUT VOLTAGE NOISE: 9.3nV/Hz
APPLICATIONS
- SINGLE-SUPPLY VIDEO LINE DRIVERS
- CCD IMAGING CHANNELS
- LOW-POWER ULTRASOUND
- PORTABLE CONSUMER ELECTRONICS

All other trademarks are the property of their respective owners.

The OPA2832 is a dual, low-power, high-speed, fixed-gain amplifier designed to operate on a single +3V to +11V supply. Operation on ±1.5V to ±5.5V supplies is also supported. The input range extends below ground and to within 1.7V of the positive supply.

Using complementary common-emitter outputs provides an output swing to within 30mV of ground and 60mV of the positive supply. The high output drive current and low differential gain and phase errors also make it ideal for single-supply consumer video products.

Low distortion operation is ensured by high bandwidth product (75MHz) and slew rate (350V/µs), making the OPA2832 an ideal input buffer stage to 3V and 5V CMOS converters. Unlike earlier low-power, single-supply amplifiers, distortion performance improves as the signal swing is decreased. A low 9.3nV/Hz input voltage noise supports wide dynamic range operation.

The OPA2832 is available in an industry-standard SO-8 package or a small MSOP-8 package. For gains other than +1, –1, or +2, consider the OPA2830.

The OPA2832 is a dual, low-power, high-speed, fixed-gain amplifier designed to operate on a single +3V to +11V supply. Operation on ±1.5V to ±5.5V supplies is also supported. The input range extends below ground and to within 1.7V of the positive supply.

Using complementary common-emitter outputs provides an output swing to within 30mV of ground and 60mV of the positive supply. The high output drive current and low differential gain and phase errors also make it ideal for single-supply consumer video products.

Low distortion operation is ensured by high bandwidth product (75MHz) and slew rate (350V/µs), making the OPA2832 an ideal input buffer stage to 3V and 5V CMOS converters. Unlike earlier low-power, single-supply amplifiers, distortion performance improves as the signal swing is decreased. A low 9.3nV/Hz input voltage noise supports wide dynamic range operation.

The OPA2832 is available in an industry-standard SO-8 package or a small MSOP-8 package. For gains other than +1, –1, or +2, consider the OPA2830.

filter

Buscar otro/a Amplificadores operacionales de alta velocidad (GBW ≥ 50 MHz)

Descargar

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

OPA692

ACTIVO

Amplificador búfer de banda ancha con ganancia fija y deshabilitación Single channel, lower noise (1.7 nV/rtHz), lower offset (2.5 mV),and higher output current (190 mA)

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 1

	Tipo	Título		Fecha
*	Data sheet	Dual, Low-Power, High-Speed, Fixed-Gain Operational Amplifier datasheet (Rev. C)		28 ago 2008

OPA2832

Amplificador operacional doble, de baja potencia, de alta velocidad y de ganancia fija

OPA2832

Detalles del producto

Productos similares que pueden interesarle

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

Documentación técnica

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI