OPA4364-Q1

ACTIVO

Amplificador operacional RRIO cuádruple de 5,5 V y 7 MHz, de grado automotriz

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat OPA2364-Q1, OPA4364-Q1 datasheet (Rev. A) (Inglés)

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Reemplazo con funcionalidad mejorada del dispositivo comparado

TLV9064-Q1

ACTIVO

Amplificador operacional RRIO cuádruple de calidad automotriz, de 5.5 V y 10 MHz, para aplicaciones Higher GBW (10 MHz), faster slew rate (6.5 V/us), lower offset voltage (1.6 mV), lower power (0.538 mA), lower noise (16 nV/√Hz), higher output current (50 mA)

OPA4364-Q1

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.8

Rail-to-rail

In, Out

GBW (typ) (MHz)

7

Slew rate (typ) (V/µs)

5

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.65

Vn at 1 kHz (typ) (nV√Hz)

17

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

3

Input bias current (max) (pA)

10

CMRR (typ) (dB)

90

Iout (typ) (A)

0.045

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

0.1

Output swing headroom (to negative supply) (typ) (V)

0.01

Output swing headroom (to positive supply) (typ) (V)

-0.01

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.8

Rail-to-rail

In, Out

GBW (typ) (MHz)

7

Slew rate (typ) (V/µs)

5

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.65

Vn at 1 kHz (typ) (nV√Hz)

17

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

3

Input bias current (max) (pA)

10

CMRR (typ) (dB)

90

Iout (typ) (A)

0.045

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

0.1

Output swing headroom (to negative supply) (typ) (V)

0.01

Output swing headroom (to positive supply) (typ) (V)

-0.01

SOIC (D)

14

51.9 mm² (8.65 mm × 6 mm)

Qualified for Automotive Applications
1.8-V Operation
Bandwidth: 7 MHz
CMRR: 90 dB (Typ)
Slew Rate: 5 V/µs
Low Offset: 500 µV (Max)
Quiescent Current: 750 µA/Channel (Max)
Shutdown Mode: <1 µA/Channel
APPLICATIONS
- Signal Conditioning
- Data Acquisition
- Process Control
- Active Filters
- Test Equipment

Qualified for Automotive Applications
1.8-V Operation
Bandwidth: 7 MHz
CMRR: 90 dB (Typ)
Slew Rate: 5 V/µs
Low Offset: 500 µV (Max)
Quiescent Current: 750 µA/Channel (Max)
Shutdown Mode: <1 µA/Channel
APPLICATIONS
- Signal Conditioning
- Data Acquisition
- Process Control
- Active Filters
- Test Equipment

The OPA2364 and OPA4364 are high-performance CMOS operational amplifiers optimized for low-voltage single-supply operation. These miniature low-cost amplifiers are designed to operate on single supplies from 1.8 V (±0.9 V) to 5.5 V (±2.75 V). Applications include sensor amplification and signal conditioning in battery-powered systems.

The OPAx364 family offers excellent CMRR without the crossover associated with traditional complimentary input stages. This results in excellent performance for driving analog-to-digital (A/D) converters without degradation of differential linearity and total harmonic distortion (THD). The input common-mode range includes both the negative and positive supplies. The output voltage swing is within 10 mV of the rails.

The dual version is available in an SO-8 package and the quad package is available in an
SO-14 package. All versions are specified for operation from –40°C to 125°C.

The OPA2364 and OPA4364 are high-performance CMOS operational amplifiers optimized for low-voltage single-supply operation. These miniature low-cost amplifiers are designed to operate on single supplies from 1.8 V (±0.9 V) to 5.5 V (±2.75 V). Applications include sensor amplification and signal conditioning in battery-powered systems.

The OPAx364 family offers excellent CMRR without the crossover associated with traditional complimentary input stages. This results in excellent performance for driving analog-to-digital (A/D) converters without degradation of differential linearity and total harmonic distortion (THD). The input common-mode range includes both the negative and positive supplies. The output voltage swing is within 10 mV of the rails.

The dual version is available in an SO-8 package and the quad package is available in an
SO-14 package. All versions are specified for operation from –40°C to 125°C.

filter

Buscar otro/a Amplificadores de propósito general

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

Documentación principal	Tipo	Título	Opciones de formato	Descargar la versión más reciente en inglés	Fecha
*	Hoja de datos	OPA2364-Q1, OPA4364-Q1 datasheet (Rev. A)			10/10/2006
	Libro electrónico	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML		28/03/2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AMP-PDK-EVM — Módulo de evaluación del kit de desarrollo del rendimiento del amplificador

El kit de desarrollo del rendimiento (PDK) del amplificador es un kit de módulo de evaluación (EVM) para probar los parámetros comunes del amplificador operacional y es compatible con la mayoría de los amplificadores operacionales y comparadores. El kit de EVM ofrece una placa principal con varias (...)

Guía del usuario: PDF | HTML