OPA549-HIREL

ACTIVO

Amplificador operacional de alta tensión y alta corriente

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat High-Voltage, High-Current Operational Amplifier. datasheet (Inglés)

OPA549-HIREL

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

8

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

60

Iout (typ) (A)

8

GBW (typ) (MHz)

0.9

Slew rate (typ) (V/µs)

9

Vos (offset voltage at 25°C) (max) (mV)

5

Offset drift (typ) (µV/°C)

20

Iq per channel (typ) (mA)

26

Features

Adj Current Limit, Shutdown

Rating

HiRel Enhanced Product

Operating temperature range (°C)

-55 to 125

Input bias current (max) (pA)

500000

CMRR (typ) (dB)

95

Rail-to-rail

In to V-

Architecture

Bipolar

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

8

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

60

Iout (typ) (A)

8

GBW (typ) (MHz)

0.9

Slew rate (typ) (V/µs)

9

Vos (offset voltage at 25°C) (max) (mV)

5

Offset drift (typ) (µV/°C)

20

Iq per channel (typ) (mA)

26

Features

Adj Current Limit, Shutdown

Rating

HiRel Enhanced Product

Operating temperature range (°C)

-55 to 125

Input bias current (max) (pA)

500000

CMRR (typ) (dB)

95

Rail-to-rail

In to V-

Architecture

Bipolar

TO-OTHER (KVC)

11

90.09 mm² (20.02 mm × 4.5 mm)

High Output Current:
- 8-A Continuous
- 10-A Peak
Wide Power Supply Range:
- Single Supply: 8 V to 60 V
- Dual Supply: ±4 V to ±30 V
Wide Output Voltage Swing
Fully Protected:
- Thermal Shutdown
- Adjustable Current
Output Disable Control
Thermal Shutdown Indicator
High Slew Rate: 9 V/µs
Control Reference Pin
11-Lead Power Package

High Output Current:
- 8-A Continuous
- 10-A Peak
Wide Power Supply Range:
- Single Supply: 8 V to 60 V
- Dual Supply: ±4 V to ±30 V
Wide Output Voltage Swing
Fully Protected:
- Thermal Shutdown
- Adjustable Current
Output Disable Control
Thermal Shutdown Indicator
High Slew Rate: 9 V/µs
Control Reference Pin
11-Lead Power Package

The OPA549 is a low-cost, high-voltage and high-current operational amplifier ideal for driving a wide variety of loads. This laser-trimmed monolithic integrated circuit provides excellent low-level signal accuracy and high output voltage and current.

The OPA549 operates from either single or dual supplies for design flexibility. The input common-mode range extends below the negative supply.

The OPA549 is internally protected against over-temperature conditions and current overloads. In addition, the OPA549 provides an accurate, user-selected current limit. Unlike other designs which use a power resistor in series with the output current path, the OPA549 senses the load indirectly. This allows the current limit to be adjusted from 0 A to 10 A with a resistor or potentiometer, or controlled digitally with a voltage-out or current-out digital-to-analog converter (DAC).

The enable/status (E/S) pin provides two functions. It can be monitored to determine if the device is in thermal shutdown, and it can be forced low to disable the output stage and effectively disconnect the load.

The OPA549 is available in an 11-lead power package. Its copper tab allows easy mounting to a heat sink for excellent thermal performance. Operation is specified over the temperature range of −55°C to 125°C.

The OPA549 is a low-cost, high-voltage and high-current operational amplifier ideal for driving a wide variety of loads. This laser-trimmed monolithic integrated circuit provides excellent low-level signal accuracy and high output voltage and current.

The OPA549 operates from either single or dual supplies for design flexibility. The input common-mode range extends below the negative supply.

The OPA549 is internally protected against over-temperature conditions and current overloads. In addition, the OPA549 provides an accurate, user-selected current limit. Unlike other designs which use a power resistor in series with the output current path, the OPA549 senses the load indirectly. This allows the current limit to be adjusted from 0 A to 10 A with a resistor or potentiometer, or controlled digitally with a voltage-out or current-out digital-to-analog converter (DAC).

The enable/status (E/S) pin provides two functions. It can be monitored to determine if the device is in thermal shutdown, and it can be forced low to disable the output stage and effectively disconnect the load.

The OPA549 is available in an 11-lead power package. Its copper tab allows easy mounting to a heat sink for excellent thermal performance. Operation is specified over the temperature range of −55°C to 125°C.

filter

Buscar otro/a Amplificadores operacionales de potencia

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 4

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	High-Voltage, High-Current Operational Amplifier. datasheet		18/05/2012
*	Informe de radiación y confiabilidad	OPA549MKVC Reliability Report		22/12/2014
	Libro electrónico	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	28/03/2017
	Libro electrónico	Analog Engineer’s Pocket Reference Guide Fifth Edition (Rev. D)	PDF \| HTML	30/09/2014

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Herramienta de cálculo

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

La calculadora del ingeniero analógico está diseñada para acelerar muchos de los cálculos repetitivos que los ingenieros de diseño de circuitos analógicos utilizan de forma habitual. Esta herramienta para PC proporciona una interfaz gráfica con una lista de varios cálculos comunes que van desde el (...)

Productos y hardware compatibles

Iniciar

Opciones de descarga