Inicio Amplificadores Amplificadores operacionales (op amps) Amplificadores de propósito general
Inicio
Amplificadores
Amplificadores operacionales (op amps)
Amplificadores de propósito general

OPA602

NO RECOMENDADO PARA NUEVOS DISEÑOS

Amplificador operacional de precisión de alta velocidad Difer®

Haga su pedido ahora
Hoja de datos
OPA602 no se recomienda para nuevos diseños
Este producto sigue estando disponible para los clientes existentes. Los nuevos diseños deben considerar un producto alternativo.
open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
OPA145 ACTIVO Amplificador operacional JFET de precisión simple, de 5,5 MHz, de alta velocidad de giro, bajo ruido This product offers wider supply (4.5V-36V), higher DC precision (150µV maximum offset, 0.4µV/°C drift), lower power consumption (0.445mA), and lower noise.

OPA602

NO RECOMENDADO PARA NUEVOS DISEÑOS
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Rail-to-rail Out GBW (typ) (MHz) 6.5 Slew rate (typ) (V/µs) 35 Vos (offset voltage at 25°C) (max) (mV) 1 Iq per channel (typ) (mA) 3 Vn at 1 kHz (typ) (nV√Hz) 13 Rating Catalog Operating temperature range (°C) -25 to 85 Offset drift (typ) (µV/°C) 3 Input bias current (max) (pA) 2 CMRR (typ) (dB) 100 Iout (typ) (A) 0.02 Architecture FET Input common mode headroom (to negative supply) (typ) (V) 4 Input common mode headroom (to positive supply) (typ) (V) -2 Output swing headroom (to negative supply) (typ) (V) 2.1 Output swing headroom (to positive supply) (typ) (V) -1.2
Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 10 Rail-to-rail Out GBW (typ) (MHz) 6.5 Slew rate (typ) (V/µs) 35 Vos (offset voltage at 25°C) (max) (mV) 1 Iq per channel (typ) (mA) 3 Vn at 1 kHz (typ) (nV√Hz) 13 Rating Catalog Operating temperature range (°C) -25 to 85 Offset drift (typ) (µV/°C) 3 Input bias current (max) (pA) 2 CMRR (typ) (dB) 100 Iout (typ) (A) 0.02 Architecture FET Input common mode headroom (to negative supply) (typ) (V) 4 Input common mode headroom (to positive supply) (typ) (V) -2 Output swing headroom (to negative supply) (typ) (V) 2.1 Output swing headroom (to positive supply) (typ) (V) -1.2
PDIP (P) 8 92.5083 mm² 9.81 x 9.43 SOIC (D) 8 29.4 mm² 4.9 x 6
  • WIDE BANDWIDTH: 6.5MHz
  • HIGH SLEW RATE: 35V/us
  • LOW OFFSET: ±250 uV max
  • LOW BIAS CURRENT: ±1pA max
  • FAST SETTLING TIME:1 us to 0.01%
  • UNITY-GAIN STABLE
  • APPLICATIONS
    • PRECISION INSTRUMENTATION
    • OPTOELECTRONICS
    • SONAR, ULTRASOUND
    • PROFESSIONAL AUDIO EQUIPMENT
    • MEDICAL EQUIPMENT
    • DATA CONVERSION

Difet® Burr-Brown Corp.
  • WIDE BANDWIDTH: 6.5MHz
  • HIGH SLEW RATE: 35V/us
  • LOW OFFSET: ±250 uV max
  • LOW BIAS CURRENT: ±1pA max
  • FAST SETTLING TIME:1 us to 0.01%
  • UNITY-GAIN STABLE
  • APPLICATIONS
    • PRECISION INSTRUMENTATION
    • OPTOELECTRONICS
    • SONAR, ULTRASOUND
    • PROFESSIONAL AUDIO EQUIPMENT
    • MEDICAL EQUIPMENT
    • DATA CONVERSION

Difet® Burr-Brown Corp.

The OPA602 is a precision, wide bandwidth FET operational amplifier. Monolithic Difet (dielectrically isolated FET) construction provides an unusual combination of high-speed and accuracy.

Its wide-bandwidth design minimizes dynamic errors. High slew rate and fast settling time allow accurate signal processing in pulse and data conversion applications. Wide band-width and low distortion minimize AC errors. All specifications are rated with a 1k resistor in parallel with 500pF load. The OPA602 is unity-gain stable and easily drives capacitive loads up to 1500pF.

Laser-trimmed input circuitry provides offset voltage and drift performance normally associated with precision bipolar op amps. Difet construction achieves extremely low input bias currents (1pA max) without compromising input voltage noise.

The OPA602’s unique input cascode circuitry maintains low input bias current and precise input characteristics over its full input common-mode voltage range.

The OPA602 is a precision, wide bandwidth FET operational amplifier. Monolithic Difet (dielectrically isolated FET) construction provides an unusual combination of high-speed and accuracy.

Its wide-bandwidth design minimizes dynamic errors. High slew rate and fast settling time allow accurate signal processing in pulse and data conversion applications. Wide band-width and low distortion minimize AC errors. All specifications are rated with a 1k resistor in parallel with 500pF load. The OPA602 is unity-gain stable and easily drives capacitive loads up to 1500pF.

Laser-trimmed input circuitry provides offset voltage and drift performance normally associated with precision bipolar op amps. Difet construction achieves extremely low input bias currents (1pA max) without compromising input voltage noise.

The OPA602’s unique input cascode circuitry maintains low input bias current and precise input characteristics over its full input common-mode voltage range.
filter Buscar otro/a Amplificadores de propósito general
Descargar

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet OPA602: High-Speed Precision Difet? Operational Amplifier datasheet (Rev. A) 09 sep 2002

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje