PGA280

ACTIVO

Amplificador de ganancia programable de alto voltaje y deriva cero

Detalles del producto

PGA/VGA PGA Number of channels 2 Vs (min) (V) 10 Vs (max) (V) 36 Input type Differential Output type Differential Input offset drift (±) (typ) (µV/°C) 0.03 Interface type GPIO, SPI Noise at 1 kHz (typ) (V√Hz) 0.00000002 BW at Acl (MHz) 6 Acl, min spec gain (V/V) 0.125 Gain (max) (dB) 42 Architecture CMOS Features SPI, Zero Drift Vos (offset voltage at 25°C) (typ) (mV) 0.003 Input voltage noise (typ) (µV√Hz) 0.022 Slew rate (typ) (V/µs) 1 Iq per channel (typ) (mA) 3.15 Gain error (typ) (%) 0.03 Gain drift (max) (ppm/°C) 0.5 Rating Catalog Operating temperature range (°C) -40 to 125
PGA/VGA PGA Number of channels 2 Vs (min) (V) 10 Vs (max) (V) 36 Input type Differential Output type Differential Input offset drift (±) (typ) (µV/°C) 0.03 Interface type GPIO, SPI Noise at 1 kHz (typ) (V√Hz) 0.00000002 BW at Acl (MHz) 6 Acl, min spec gain (V/V) 0.125 Gain (max) (dB) 42 Architecture CMOS Features SPI, Zero Drift Vos (offset voltage at 25°C) (typ) (mV) 0.003 Input voltage noise (typ) (µV√Hz) 0.022 Slew rate (typ) (V/µs) 1 Iq per channel (typ) (mA) 3.15 Gain error (typ) (%) 0.03 Gain drift (max) (ppm/°C) 0.5 Rating Catalog Operating temperature range (°C) -40 to 125
TSSOP (PW) 24 49.92 mm² (7.8 mm × 6.4 mm)
  • Wide input range: ±15.5 V at ±18-V supply
  • Binary gain steps: 128V/V to 1/8 V/V
  • Additional scaling factor: 1 V/V and 1⅜ V/V
  • Low offset voltage: 3 µV at G = 128
  • Near-zero long-term drift of offset voltage
  • Near-zero gain drift: 0.5 ppm/°C
  • Excellent linearity: 1.5 ppm
  • Excellent CMRR: 140 dB
  • High input impedance
  • Very low 1/f noise
  • Differential signal output
  • Overload detection
  • Input configuration switch matrix
  • Wire break test current
  • Expandable SPI™ with checksum
  • General-purpose I/O port
  • TSSOP-24 package
  • Wide input range: ±15.5 V at ±18-V supply
  • Binary gain steps: 128V/V to 1/8 V/V
  • Additional scaling factor: 1 V/V and 1⅜ V/V
  • Low offset voltage: 3 µV at G = 128
  • Near-zero long-term drift of offset voltage
  • Near-zero gain drift: 0.5 ppm/°C
  • Excellent linearity: 1.5 ppm
  • Excellent CMRR: 140 dB
  • High input impedance
  • Very low 1/f noise
  • Differential signal output
  • Overload detection
  • Input configuration switch matrix
  • Wire break test current
  • Expandable SPI™ with checksum
  • General-purpose I/O port
  • TSSOP-24 package

The PGA280 is a high-precision instrumentation amplifier with digitally-controllable gain and signal integrity test capability. This device offers low offset voltage, near-zero offset and gain drift, excellent linearity, and nearly no 1/f noise with superior common-mode and supply rejection to support high-resolution precision measurement. The 36-V supply capability and wide, high-impedance input range comply with requirements for universal signal measurement.

Special circuitry prevents inrush currents from multiplexer (MUX) switching. In addition, the input switch matrix enables easy reconfiguration and system-level diagnostics—overload conditions are indicated.

The configurable general-purpose input/output (GPIO) offers several control and communication features. The SPI can be expanded to communicate with more devices, supporting isolation with only four ISO couplers. The PGA280 is available in a TSSOP-24 package and is specified from –40°C to +105°C. For all available packages, see the package option addendum at the end of the data sheet.

The PGA280 is a high-precision instrumentation amplifier with digitally-controllable gain and signal integrity test capability. This device offers low offset voltage, near-zero offset and gain drift, excellent linearity, and nearly no 1/f noise with superior common-mode and supply rejection to support high-resolution precision measurement. The 36-V supply capability and wide, high-impedance input range comply with requirements for universal signal measurement.

Special circuitry prevents inrush currents from multiplexer (MUX) switching. In addition, the input switch matrix enables easy reconfiguration and system-level diagnostics—overload conditions are indicated.

The configurable general-purpose input/output (GPIO) offers several control and communication features. The SPI can be expanded to communicate with more devices, supporting isolation with only four ISO couplers. The PGA280 is available in a TSSOP-24 package and is specified from –40°C to +105°C. For all available packages, see the package option addendum at the end of the data sheet.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
PGA281 ACTIVO Amplificador de ganancia programable de alto voltaje y deriva cero Single channel version

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos PGA280 Zerø-Drift, High-Voltage, Programmable Gain Instrumentation Amplifier datasheet (Rev. B) PDF | HTML 8/04/2020
Analog Design Journal Precision signal conditioning for safety-enabled AIMs in factory automation 30/09/2019
Nota sobre la aplicación PGA280 Communication via SPI™ 6/12/2009

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TSSOP (PW) 24 Ultra Librarian

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos