SN65LBC175A

ACTIVO

Receptores de línea diferencial cuádruple RS-485

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat SN65LBC175A, SN75LBC175A Quadruple RS-485 Differential Line Receivers datasheet (Rev. D) (Inglés) PDF | HTML

SN65LBC175A

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of receivers

4

Number of transmitters

0

Signaling rate (max) (Mbps)

50

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

20000

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Number of receivers

4

Number of transmitters

0

Signaling rate (max) (Mbps)

50

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

20000

Rating

Catalog

Operating temperature range (°C)

-40 to 85

SOIC (D)

16

59.4 mm² (9.9 mm × 6 mm)

PDIP (N)

16

181.42 mm² (19.3 mm × 9.4 mm)

Designed for TIA/EIA-485, TIA/EIA-422, and ISO 8482 applications
Signaling rate exceeding 50 Mbps
Fail-safe in bus short-circuit, open-circuit, and idle-bus conditions
ESD protection on bus inputs 6 kV
Common-mode bus input range −7 V to 12 V
Propagation delay times <16 ns
Low standby power consumption <20 µA
Pin-compatible upgrade for MC3486, DS96F175, LTC489, and SN75175

Designed for TIA/EIA-485, TIA/EIA-422, and ISO 8482 applications
Signaling rate exceeding 50 Mbps
Fail-safe in bus short-circuit, open-circuit, and idle-bus conditions
ESD protection on bus inputs 6 kV
Common-mode bus input range −7 V to 12 V
Propagation delay times <16 ns
Low standby power consumption <20 µA
Pin-compatible upgrade for MC3486, DS96F175, LTC489, and SN75175

The SN65LBC175A and SN75LBC175A are quadruple differential line receivers with 3-state outputs, designed for TIA/EIA-485 (RS-485), TIA/EIA-422 (RS-422), and ISO 8482 (Euro RS-485) applications.

These devices are optimized for balanced multipoint bus communication at data rates up to and exceeding 50 million bits per second. The transmission media may be twisted-pair cables, printed-circuit board traces, or backplanes. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

Each receiver operates over a wide range of positive and negative common-mode input voltages, and features ESD protection to 6 kV, making it suitable for high-speed multipoint data transmission applications in harsh environments. These devices are designed using LinBiCMOS™, facilitating low power consumption and inherent robustness.

Two EN inputs provide pair-wise enable control, or these can be tied together externally to enable all four drivers with the same signal.

The SN75LBC175A is characterized for operation over the temperature range of 0°C to 70°C. The SN65LBC175A is characterized over the temperature range from −40°C to 85°C.

The SN65LBC175A and SN75LBC175A are quadruple differential line receivers with 3-state outputs, designed for TIA/EIA-485 (RS-485), TIA/EIA-422 (RS-422), and ISO 8482 (Euro RS-485) applications.

These devices are optimized for balanced multipoint bus communication at data rates up to and exceeding 50 million bits per second. The transmission media may be twisted-pair cables, printed-circuit board traces, or backplanes. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

Each receiver operates over a wide range of positive and negative common-mode input voltages, and features ESD protection to 6 kV, making it suitable for high-speed multipoint data transmission applications in harsh environments. These devices are designed using LinBiCMOS™, facilitating low power consumption and inherent robustness.

Two EN inputs provide pair-wise enable control, or these can be tied together externally to enable all four drivers with the same signal.

The SN75LBC175A is characterized for operation over the temperature range of 0°C to 70°C. The SN65LBC175A is characterized over the temperature range from −40°C to 85°C.

filter

Buscar otro/a Transceptores RS-485 y RS-422

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

SN65LBC174A

ACTIVO

Controladores de línea diferencial cuádruple RS-485 Quad receiver with 30Mbps signaling rate

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 1

Documentación principal	Tipo	Título	Opciones de formato	Descargar la versión más reciente en inglés	Fecha
*	Hoja de datos	SN65LBC175A, SN75LBC175A Quadruple RS-485 Differential Line Receivers datasheet (Rev. D)	PDF \| HTML		8/11/2023

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación