SN75ALS174

ACTIVO

Controlador de línea diferencial cuádruple

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat SN75ALS174 Quadruple Differential Line Driver datasheet (Rev. A) (Inglés) PDF | HTML

SN75ALS174

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of receivers

0

Number of transmitters

4

Duplex

Half

Signaling rate (max) (Mbps)

20

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

55000

Rating

Catalog

Operating temperature range (°C)

0 to 70

Number of receivers

0

Number of transmitters

4

Duplex

Half

Signaling rate (max) (Mbps)

20

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

55000

Rating

Catalog

Operating temperature range (°C)

0 to 70

SOIC (DW)

20

131.84 mm² (12.8 mm × 10.3 mm)

Meets or exceeds the requirements of ANSI EIA/TIA-422-B and RS-485
High-speed advanced low-power Schottky circuitry
Designed for up to 20Mbit/s operation in both serial and parallel applications
Designed for multipoint transmission on long bus lines in noisy environments
Low supply current requirements 55mA max
Wide positive and negative input/output bus voltage ranges
Driver output capacity: 60mA
Thermal-shutdown protection
Driver positive- and negative-current limiting

Meets or exceeds the requirements of ANSI EIA/TIA-422-B and RS-485
High-speed advanced low-power Schottky circuitry
Designed for up to 20Mbit/s operation in both serial and parallel applications
Designed for multipoint transmission on long bus lines in noisy environments
Low supply current requirements 55mA max
Wide positive and negative input/output bus voltage ranges
Driver output capacity: 60mA
Thermal-shutdown protection
Driver positive- and negative-current limiting

The SN75ALS174 is a quadruple line driver with tri-state differential outputs. It is designed to meet the requirements of ANSI Standards EIA/TIA-422-B and RS-485. This device is optimized for balanced multipoint bus transmission at rates of up to 20Mbit/s.

Each driver features wide positive and negative common-mode output voltage ranges that make them suitable for party-line applications in noisy environments.

The SN75ALS174 provides positive- and negative-current limiting and thermal shutdown for protection from line fault conditions on the transmission bus line. Shutdown occurs at a junction temperature of approximately 150°C.

The SN75ALS174 is characterized for operation from 0°C to 70°C.

The SN75ALS174 is a quadruple line driver with tri-state differential outputs. It is designed to meet the requirements of ANSI Standards EIA/TIA-422-B and RS-485. This device is optimized for balanced multipoint bus transmission at rates of up to 20Mbit/s.

Each driver features wide positive and negative common-mode output voltage ranges that make them suitable for party-line applications in noisy environments.

The SN75ALS174 provides positive- and negative-current limiting and thermal shutdown for protection from line fault conditions on the transmission bus line. Shutdown occurs at a junction temperature of approximately 150°C.

The SN75ALS174 is characterized for operation from 0°C to 70°C.

filter

Buscar otro/a Transceptores RS-485 y RS-422

Descargar

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 1

Documentación principal	Tipo	Título	Opciones de formato	Descargar la versión más reciente en inglés	Fecha
*	Hoja de datos	SN75ALS174 Quadruple Differential Line Driver datasheet (Rev. A)	PDF \| HTML		18/04/2024

SN75ALS174

Controlador de línea diferencial cuádruple

SN75ALS174

Detalles del producto

Documentación técnica

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI