TLC352

ACTIVO

Comparador diferencial doble, baja tensión LinCMOS™

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TLC352 Dual Differential Comparator datasheet (Rev. B) (Inglés) PDF | HTML

TLC352

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of channels

2

Output type

Open-collector, Open-drain

Propagation delay time (µs)

0.65

Vs (max) (V)

16

Vs (min) (V)

1.4

Rating

Catalog

Iq per channel (typ) (mA)

0.07

Vos (offset voltage at 25°C) (max) (mV)

5

Rail-to-rail

In to V-

Operating temperature range (°C)

-40 to 85

Input bias current (±) (max) (nA)

20

VICR (max) (V)

15

VICR (min) (V)

0

Number of channels

2

Output type

Open-collector, Open-drain

Propagation delay time (µs)

0.65

Vs (max) (V)

16

Vs (min) (V)

1.4

Rating

Catalog

Iq per channel (typ) (mA)

0.07

Vos (offset voltage at 25°C) (max) (mV)

5

Rail-to-rail

In to V-

Operating temperature range (°C)

-40 to 85

Input bias current (±) (max) (nA)

20

VICR (max) (V)

15

VICR (min) (V)

0

PDIP (P)

8

92.5083 mm² (9.81 mm × 9.43 mm)

SOIC (D)

8

29.4 mm² (4.9 mm × 6 mm)

TSSOP (PW)

8

19.2 mm² (3 mm × 6.4 mm)

Single or dual supply operation
Wide range of supply voltages: 2.7V to 18V
Very low supply current drain:
- 150µA typical at 5V
Built-in ESD protection
High input impedance: 1012Ω typical
Extremely low input bias current 5pA typical
Ultra-stable low input offset voltage
Common-mode input voltage range includes ground
Outputs compatible with TTL, MOS, and CMOS
Pin-compatible with LM393

Single or dual supply operation
Wide range of supply voltages: 2.7V to 18V
Very low supply current drain:
- 150µA typical at 5V
Built-in ESD protection
High input impedance: 1012Ω typical
Extremely low input bias current 5pA typical
Ultra-stable low input offset voltage
Common-mode input voltage range includes ground
Outputs compatible with TTL, MOS, and CMOS
Pin-compatible with LM393

This device is fabricated using CMOS technology and consists of two independent voltage comparators, each designed to operate from a single power supply. Operation from dual supplies is also possible if the difference between the two supplies is 2.7V to 18V. Each device features extremely high input impedance (typically greater than 1012Ω), which allows direct interface to high-impedance sources. The output are n-channel open-drain configurations and can be connected to achieve positive-logic wired-AND relationships. The capability of the TLC352 to operate from 2.7V supply makes this device an excellent for low-voltage battery applications.

The TLC352 has internal electrostatic discharge (ESD) protection circuits and is classified with a 2000V ESD rating. However, care must be exercised in handling this device as exposure to ESD can result in degradation of the device parametric performance.

The TLC352C is characterized for operation from 0°C to 70°C. The TLC352I is characterized for operation over the industrial temperature range of −40°C to 85°C.

This device is fabricated using CMOS technology and consists of two independent voltage comparators, each designed to operate from a single power supply. Operation from dual supplies is also possible if the difference between the two supplies is 2.7V to 18V. Each device features extremely high input impedance (typically greater than 1012Ω), which allows direct interface to high-impedance sources. The output are n-channel open-drain configurations and can be connected to achieve positive-logic wired-AND relationships. The capability of the TLC352 to operate from 2.7V supply makes this device an excellent for low-voltage battery applications.

The TLC352 has internal electrostatic discharge (ESD) protection circuits and is classified with a 2000V ESD rating. However, care must be exercised in handling this device as exposure to ESD can result in degradation of the device parametric performance.

The TLC352C is characterized for operation from 0°C to 70°C. The TLC352I is characterized for operation over the industrial temperature range of −40°C to 85°C.

filter

Buscar otro/a Comparadores

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

Documentación principal	Tipo	Título	Opciones de formato	Descargar la versión más reciente en inglés	Fecha
*	Hoja de datos	TLC352 Dual Differential Comparator datasheet (Rev. B)	PDF \| HTML		25/06/2025
	Libro electrónico	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML		28/03/2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AMP-PDK-EVM — Módulo de evaluación del kit de desarrollo del rendimiento del amplificador

El kit de desarrollo del rendimiento (PDK) del amplificador es un kit de módulo de evaluación (EVM) para probar los parámetros comunes del amplificador operacional y es compatible con la mayoría de los amplificadores operacionales y comparadores. El kit de EVM ofrece una placa principal con varias (...)

Guía del usuario: PDF | HTML

Productos y hardware compatibles

Ver opciones

Modelo de simulación