TLE2141-Q1

ACTIVO

Amplificadores operacionales de precisión de bajo ruido y alta velocidad para automoción

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TLE2141-Q1 Excalibur™ Low-Noise High-Speed Precision Operational Amplifiers datasheet (Rev. A) (Inglés) PDF | HTML

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

OPA992-Q1

ACTIVO

Amplificador operacional de bajo nivel de ruido para automoción, simple, 40 V, 10 MHz de carril a ca Higher GBW (11MHz), faster slew rate (33V/μs), lower offset voltage (1mV), lower noise (6.8nV/√Hz)

OPA991-Q1

ACTIVO

Amplificador operacional automotriz único, 40 V, 4.5 MHz, de baja potencia Rail-to-rail I/O, lower offset voltage (0.895 mV), lower power (0.56 mA), higher output current (75 mA)

TLE2141-Q1

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

44

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4

Vos (offset voltage at 25°C) (max) (mV)

1.4

Offset drift (typ) (µV/°C)

1.7

Input bias current (max) (pA)

1500000

GBW (typ) (MHz)

6

Features

High Cload Drive

Slew rate (typ) (V/µs)

45

Rail-to-rail

In to V-

Iq per channel (typ) (mA)

3.4

Vn at 1 kHz (typ) (nV√Hz)

10.5

CMRR (typ) (dB)

108

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Iout (typ) (A)

0.031

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

-0.3

Input common mode headroom (to positive supply) (typ) (V)

-1.8

Output swing headroom (to negative supply) (typ) (V)

0.1

Output swing headroom (to positive supply) (typ) (V)

-0.8

THD + N at 1 kHz (typ) (%)

0.0052

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

44

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4

Vos (offset voltage at 25°C) (max) (mV)

1.4

Offset drift (typ) (µV/°C)

1.7

Input bias current (max) (pA)

1500000

GBW (typ) (MHz)

6

Features

High Cload Drive

Slew rate (typ) (V/µs)

45

Rail-to-rail

In to V-

Iq per channel (typ) (mA)

3.4

Vn at 1 kHz (typ) (nV√Hz)

10.5

CMRR (typ) (dB)

108

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Iout (typ) (A)

0.031

Architecture

Bipolar

Input common mode headroom (to negative supply) (typ) (V)

-0.3

Input common mode headroom (to positive supply) (typ) (V)

-1.8

Output swing headroom (to negative supply) (typ) (V)

0.1

Output swing headroom (to positive supply) (typ) (V)

-0.8

THD + N at 1 kHz (typ) (%)

0.0052

SOIC (D)

8

29.4 mm² (4.9 mm × 6 mm)

Qualified for automotive applications
Low noise:
- 10Hz … 15nV/√ Hz
- 1kHz … 10.5nV/√ Hz
Load capability: 10000pF
Short-circuit output current: 20mA (minimum)
Slew rate: 27V/µs (minimum)
High gain-bandwidth product: 5.9MHz
Low VIO: 500µV (maximum) at 25°C
Single or split supply: 4V to 44V
Fast settling time
- 340ns to 0.1%
- 400ns to 0.01%
Saturation recovery: 150ns
Large output swing: VCC– + 0.1V to VCC+ – 1V

Qualified for automotive applications
Low noise:
- 10Hz … 15nV/√ Hz
- 1kHz … 10.5nV/√ Hz
Load capability: 10000pF
Short-circuit output current: 20mA (minimum)
Slew rate: 27V/µs (minimum)
High gain-bandwidth product: 5.9MHz
Low VIO: 500µV (maximum) at 25°C
Single or split supply: 4V to 44V
Fast settling time
- 340ns to 0.1%
- 400ns to 0.01%
Saturation recovery: 150ns
Large output swing: VCC– + 0.1V to VCC+ – 1V

The TLE2141-Q1 device is a high-performance, internally compensated operational amplifier built using the Texas Instruments complementary bipolar Excalibur™ process. It is a pin-compatible upgrade to standard industry products.

The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV/√ Hz with a 10Hz 1/f corner and symmetrical 40V/µs slew rate typically with loads up to 800pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 430ns to 0.1% of a 10V step with a 2kΩ/100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 640ns.

The TLE2141-Q1 device is a high-performance, internally compensated operational amplifier built using the Texas Instruments complementary bipolar Excalibur™ process. It is a pin-compatible upgrade to standard industry products.

The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV/√ Hz with a 10Hz 1/f corner and symmetrical 40V/µs slew rate typically with loads up to 800pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 430ns to 0.1% of a 10V step with a 2kΩ/100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 640ns.

filter

Buscar otro/a Amplificadores operacionales de precisión (Vos <1 mV)

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 4

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	TLE2141-Q1 Excalibur™ Low-Noise High-Speed Precision Operational Amplifiers datasheet (Rev. A)	PDF \| HTML	23/07/2025
	Libro electrónico	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	28/03/2017
	Nota sobre la aplicación	TLE2141 and TLE2141-Q1 EMI Immunity Performance (Rev. B)		1/07/2015
	Libro electrónico	Analog Engineer’s Pocket Reference Guide Fifth Edition (Rev. D)	PDF \| HTML	30/09/2014

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AMP-PDK-EVM — Módulo de evaluación del kit de desarrollo del rendimiento del amplificador

El kit de desarrollo del rendimiento (PDK) del amplificador es un kit de módulo de evaluación (EVM) para probar los parámetros comunes del amplificador operacional y es compatible con la mayoría de los amplificadores operacionales y comparadores. El kit de EVM ofrece una placa principal con varias (...)

Guía del usuario: PDF | HTML