TLV1704-SEP

ACTIVO

Radiation-tolerant, 2.2V to 24V microPower quad comparator

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TLV1704-SEP 2.2V to 24V, Radiation-Tolerant microPower Quad Comparator in Space Enhanced Plastic datasheet (Rev. B) (Inglés) PDF | HTML

TLV1704-SEP

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of channels

4

Output type

Open-collector, Open-drain

Propagation delay time (µs)

0.56

Vs (max) (V)

24

Vs (min) (V)

2.2

Rating

Space

Iq per channel (typ) (mA)

0.055

Vos (offset voltage at 25°C) (max) (mV)

2.5

Rail-to-rail

In

Operating temperature range (°C)

-55 to 125

Input bias current (±) (max) (nA)

15

VICR (max) (V)

24

VICR (min) (V)

0

Number of channels

4

Output type

Open-collector, Open-drain

Propagation delay time (µs)

0.56

Vs (max) (V)

24

Vs (min) (V)

2.2

Rating

Space

Iq per channel (typ) (mA)

0.055

Vos (offset voltage at 25°C) (max) (mV)

2.5

Rail-to-rail

In

Operating temperature range (°C)

-55 to 125

Input bias current (±) (max) (nA)

15

VICR (max) (V)

24

VICR (min) (V)

0

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

VID V62/18613
Radiation-Tolerant
- Single Event Latch-up (SEL) immune to 43MeV-cm2/mg at 125°C
- ELDRS free to 30krad(Si)
- Total Ionizing Dose (TID) rlat for every wafer lot up to 30krad(Si)
Space enhanced plastic
- Controlled baseline
- Gold wire
- NiPdAu lead finish
- One assembly and test site
- One fabrication site
- Available in military (–55°C to 125°C) temperature range
- Extended product life cycle
- Extended product-change notification
- Product traceability
- Enhanced mold compound for low outgassing
Supply range: 2.2V to 24V
Low quiescent current: 55µA per comparator
Input common-mode range includes both rails
Low propagation delay: 560ns
Low input offset voltage: 300µV
Open collector outputs:
- Up to 24V above negative supply regardless of supply voltage
Small packages:
- Quad: TSSOP-14

VID V62/18613
Radiation-Tolerant
- Single Event Latch-up (SEL) immune to 43MeV-cm2/mg at 125°C
- ELDRS free to 30krad(Si)
- Total Ionizing Dose (TID) rlat for every wafer lot up to 30krad(Si)
Space enhanced plastic
- Controlled baseline
- Gold wire
- NiPdAu lead finish
- One assembly and test site
- One fabrication site
- Available in military (–55°C to 125°C) temperature range
- Extended product life cycle
- Extended product-change notification
- Product traceability
- Enhanced mold compound for low outgassing
Supply range: 2.2V to 24V
Low quiescent current: 55µA per comparator
Input common-mode range includes both rails
Low propagation delay: 560ns
Low input offset voltage: 300µV
Open collector outputs:
- Up to 24V above negative supply regardless of supply voltage
Small packages:
- Quad: TSSOP-14

The TLV1704-SEP (Quad) device offers a wide supply range, rail-to-rail inputs, low quiescent current, and low propagation delay. All these features come in an industry-standard, TSSOP-14 plastic package, making these devices appropriate for applications where size, weight, and design flexibility are important..

The open-collector output offers the advantage of allowing the output to be level shifted to any voltage rail up to 24V above the negative power supply, regardless of the TLV1704-SEP supply voltage. Likewise, the outputs can be wired together to form a single alert signal.

The device is a microPower comparator. Low input offset voltage, low input bias currents, low supply current, and open-collector configuration make the TLV1704-SEP device well-suited for system diagnostics such as voltage monitoring, current sensing, and zero-cross detection.

The TLV1704-SEP (Quad) device offers a wide supply range, rail-to-rail inputs, low quiescent current, and low propagation delay. All these features come in an industry-standard, TSSOP-14 plastic package, making these devices appropriate for applications where size, weight, and design flexibility are important..

The open-collector output offers the advantage of allowing the output to be level shifted to any voltage rail up to 24V above the negative power supply, regardless of the TLV1704-SEP supply voltage. Likewise, the outputs can be wired together to form a single alert signal.

The device is a microPower comparator. Low input offset voltage, low input bias currents, low supply current, and open-collector configuration make the TLV1704-SEP device well-suited for system diagnostics such as voltage monitoring, current sensing, and zero-cross detection.

filter

Buscar otro/a Comparadores

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 13

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Hoja de datos	TLV1704-SEP 2.2V to 24V, Radiation-Tolerant microPower Quad Comparator in Space Enhanced Plastic datasheet (Rev. B)	PDF \| HTML	8/08/2024
*	Informe de radiación y confiabilidad	TLV1704-SEP Production Flow and Reliability Report (Rev. A)		12/08/2025
*	Informe de radiación y confiabilidad	TLV1704-SEP Radiation Tolerant microPower Quad Comparator Plastic Package TID Report (Rev. A)		9/07/2025
*	Informe de radiación y confiabilidad	TLV1704-SEP Single-Event Effects (SEE) Radiation Report (Rev. A)	PDF \| HTML	16/08/2024
*	Informe de radiación y confiabilidad	TLV1704-SEP Neutron Displacement Damage (NDD) Characterization Report		17/03/2022
	Guía de selección	TI Space Products (Rev. L)		27/03/2026
	Circuit design	Comparator with and without hysteresis circuit (Rev. B)	PDF \| HTML	15/10/2024
	Artículo técnico	How Space Enhanced Products Address Challenges in low Earth orbit Applications (Rev. A)	PDF \| HTML	18/12/2023
	Nota sobre la aplicación	Reduce the Risk in Low-Earth Orbit Missions with Space Enhanced Plastic Products (Rev. A)	PDF \| HTML	15/09/2022
	Application brief	Analog Front-End Design With Texas Instruments’ Tooling Landscape	PDF \| HTML	7/03/2022
	Circuit design	Space-Grade, 30-krad, High-Side Current Sensing Comparator Circuit	PDF \| HTML	8/04/2021
	Nota sobre la aplicación	Reverse Current Protection Using MOSFET and Comparator to Minimize Power Dissipa		22/02/2018
	Guía del usuario	Universal Operational Amplifier Evaluation Module Selection Guide (Rev. B)		20/03/2001

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AMP-PDK-EVM — Módulo de evaluación del kit de desarrollo del rendimiento del amplificador

El kit de desarrollo del rendimiento (PDK) del amplificador es un kit de módulo de evaluación (EVM) para probar los parámetros comunes del amplificador operacional y es compatible con la mayoría de los amplificadores operacionales y comparadores. El kit de EVM ofrece una placa principal con varias (...)

Guía del usuario: PDF | HTML

Productos y hardware compatibles

Ver opciones

Placa de evaluación

OPAMPEVM-MSOPTSSOP — EVM universal para OpAmps simples/dobles/cuádruples con/sin desconexión en paquetes MSOP/TSSOP

The OPAMPEVM-MSOPTSSOP is a general purpose blank circuit board that simplifies evaluation of surface-mount op amps. The evaluation module board design allows many different circuits to be constructed easily and quickly. The board has three separate circuit development areas that can be snapped (...)

Productos y hardware compatibles

En inventario

Límite:

Inicie sesión para hacer un pedido

lock

Iniciar sesión para ver el inventario

??asset.out-of-stock-ti_es_MX??

No disponible

Modelo de simulación