TLV2352

ACTIVO

Comparador diferencial doble, baja tensión LinCMOS™

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TLV2352 Dual Low-Voltage Differential Comparators datasheet (Rev. D) (Inglés) PDF | HTML

TLV2352

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of channels

2

Output type

Open-collector, Open-drain

Propagation delay time (µs)

0.65

Vs (max) (V)

8

Vs (min) (V)

2

Rating

Catalog

Iq per channel (typ) (mA)

0.07

Vos (offset voltage at 25°C) (max) (mV)

5

Rail-to-rail

In to V-

Operating temperature range (°C)

-40 to 85

Input bias current (±) (max) (nA)

2

VICR (max) (V)

7

VICR (min) (V)

0

Number of channels

2

Output type

Open-collector, Open-drain

Propagation delay time (µs)

0.65

Vs (max) (V)

8

Vs (min) (V)

2

Rating

Catalog

Iq per channel (typ) (mA)

0.07

Vos (offset voltage at 25°C) (max) (mV)

5

Rail-to-rail

In to V-

Operating temperature range (°C)

-40 to 85

Input bias current (±) (max) (nA)

2

VICR (max) (V)

7

VICR (min) (V)

0

TSSOP (PW)

8

19.2 mm² (3 mm × 6.4 mm)

SOIC (D)

8

29.4 mm² (4.9 mm × 6 mm)

PDIP (P)

8

92.5083 mm² (9.81 mm × 9.43 mm)

Wide range of supply voltages: 2V to 8V
Wide range of supply voltages: 2.7V to 8V (TLV2352IDR and TLV2352IPWR only)
Fully characterized at 3V and 5V
Very-low supply-current drain: 120µA typical at 3V
Output compatible with TTL, MOS, and CMOS
Fast response time: 200ns typical for TTL-level input step
High input impedance: 1012Ω typical
Extremely low input bias current: 5pA typical
Common-mode input voltage range includes ground
Built-in ESD protection

Wide range of supply voltages: 2V to 8V
Wide range of supply voltages: 2.7V to 8V (TLV2352IDR and TLV2352IPWR only)
Fully characterized at 3V and 5V
Very-low supply-current drain: 120µA typical at 3V
Output compatible with TTL, MOS, and CMOS
Fast response time: 200ns typical for TTL-level input step
High input impedance: 1012Ω typical
Extremely low input bias current: 5pA typical
Common-mode input voltage range includes ground
Built-in ESD protection

The TLV2352 consists of two independent, lowpower comparators specifically designed for single power-supply applications and operates with powersupply rails as low as 2V (2.7V TLV2352IDR and TLV2352IPWR only). When powered from a 3V supply, the typical supply current is only 120µA.

The TLV2352 is designed using the Texas Instruments CMOS technology and therefore features an extremely high input impedance (typically greater than 1012Ω), which allows direct interfacing with high-impedance sources. The outputs are N-channel open-drain configurations that require an external pullup resistor to provide a positive output voltage swing, and can be connected to achieve positivelogic wired-AND relationships. The TLV2352I is fully characterized at 3V and 5V for operation from –40°C to 85°C. The TLV2352M is fully characterized at 3V and 5V for operation from –55°C to 125°C.

The TLV2352 has internal electrostatic discharge (ESD) protection circuits and has been classified with a 1000V ESD rating using Human Body Model testing. However, care must be exercised in handling this device as exposure to ESD can result in degradation of the device parametric performance.

The TLV2352 consists of two independent, lowpower comparators specifically designed for single power-supply applications and operates with powersupply rails as low as 2V (2.7V TLV2352IDR and TLV2352IPWR only). When powered from a 3V supply, the typical supply current is only 120µA.

The TLV2352 is designed using the Texas Instruments CMOS technology and therefore features an extremely high input impedance (typically greater than 1012Ω), which allows direct interfacing with high-impedance sources. The outputs are N-channel open-drain configurations that require an external pullup resistor to provide a positive output voltage swing, and can be connected to achieve positivelogic wired-AND relationships. The TLV2352I is fully characterized at 3V and 5V for operation from –40°C to 85°C. The TLV2352M is fully characterized at 3V and 5V for operation from –55°C to 125°C.

The TLV2352 has internal electrostatic discharge (ESD) protection circuits and has been classified with a 1000V ESD rating using Human Body Model testing. However, care must be exercised in handling this device as exposure to ESD can result in degradation of the device parametric performance.

filter

Buscar otro/a Comparadores

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

Documentación principal	Tipo	Título	Opciones de formato	Descargar la versión más reciente en inglés	Fecha
*	Hoja de datos	TLV2352 Dual Low-Voltage Differential Comparators datasheet (Rev. D)	PDF \| HTML		22/07/2025
	Libro electrónico	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML		28/03/2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AMP-PDK-EVM — Módulo de evaluación del kit de desarrollo del rendimiento del amplificador

El kit de desarrollo del rendimiento (PDK) del amplificador es un kit de módulo de evaluación (EVM) para probar los parámetros comunes del amplificador operacional y es compatible con la mayoría de los amplificadores operacionales y comparadores. El kit de EVM ofrece una placa principal con varias (...)

Guía del usuario: PDF | HTML

Productos y hardware compatibles

Ver opciones

Modelo de simulación