Inicio Administración de potencia Circuitos integrados de alimentación a través de Ethernet (PoE) Dispositivos alimentados

TPS2379

ACTIVO

Interfaz PD de alta potencia IEEE 802.3at de PoE con controlador de puerta externo

Detalles del producto

PoE standards supported 802.3at Type 1 (802.3af), 802.3at Type 2, Non-standard PD power level 13W, 25W, >25W DC/DC control PD Only Vin (max) (V) 57 Vin (min) (V) 0 PoE current limit (min) (mA) 850 PoE inrush limit (mA) (typ) (A) 0.14 rDS(on) per FET (typ) (mΩ) 420 Features Thermal shutdown Fault response Auto Retry Operating temperature range (°C) -40 to 85 Rating Catalog
PoE standards supported 802.3at Type 1 (802.3af), 802.3at Type 2, Non-standard PD power level 13W, 25W, >25W DC/DC control PD Only Vin (max) (V) 57 Vin (min) (V) 0 PoE current limit (min) (mA) 850 PoE inrush limit (mA) (typ) (A) 0.14 rDS(on) per FET (typ) (mΩ) 420 Features Thermal shutdown Fault response Auto Retry Operating temperature range (°C) -40 to 85 Rating Catalog
HSOIC (DDA) 8 29.4 mm² 4.9 x 6
  • IEEE 802.3at Type-2 Hardware Classification With
    Status Flag
  • Auxiliary Gate Driver for High-Power Expansion
  • Robust 100-V, 0.5-Ω Hotswap MOSFET
  • 1A (Typical) Operating Current Limit
  • 140 mA (Typical) Inrush Current Limit
  • DC-DC Converter Enable
  • 15 kV/8 kV System-level ESD Capability
  • PowerPAD™ HSOP Package
  • IEEE 802.3at Type-2 Hardware Classification With
    Status Flag
  • Auxiliary Gate Driver for High-Power Expansion
  • Robust 100-V, 0.5-Ω Hotswap MOSFET
  • 1A (Typical) Operating Current Limit
  • 140 mA (Typical) Inrush Current Limit
  • DC-DC Converter Enable
  • 15 kV/8 kV System-level ESD Capability
  • PowerPAD™ HSOP Package

The TPS2379 device is an 8-pin integrated circuit that contains all of the features needed to implement an IEEE802.3at type-2 powered device (PD) such as Detection, Classification, Type 2 Hardware Classification, and 140-mA inrush current limit during startup. The low 0.5-Ω internal switch resistance, combined with the enhanced thermal dissipation of the PowerPAD package, enables this controller to continuously handle up to 0.85 A. The TPS2379 integrates a low 0.5-Ω internal switch to allow for up to 0.85 A of continuous current through the PD during normal operation. The TPS2379 device supports higher-power applications through an external pass transistor. The TPS2379 contains several protection features such as thermal shutdown, current limit foldback, and a robust 100-V internal switch.

The TPS2379 device is an 8-pin integrated circuit that contains all of the features needed to implement an IEEE802.3at type-2 powered device (PD) such as Detection, Classification, Type 2 Hardware Classification, and 140-mA inrush current limit during startup. The low 0.5-Ω internal switch resistance, combined with the enhanced thermal dissipation of the PowerPAD package, enables this controller to continuously handle up to 0.85 A. The TPS2379 integrates a low 0.5-Ω internal switch to allow for up to 0.85 A of continuous current through the PD during normal operation. The TPS2379 device supports higher-power applications through an external pass transistor. The TPS2379 contains several protection features such as thermal shutdown, current limit foldback, and a robust 100-V internal switch.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TPS2373 ACTIVO Interfaz PD IEEE 802.3bt de PoE de alta potencia con inicio avanzado This product is fully compliant to the IEEE 802.3bt standard.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 5
Tipo Título Fecha
* Data sheet TPS2379 IEEE 802.3at PoE High-Power PD Interface With External Gate Driver datasheet (Rev. A) PDF | HTML 28 jul 2015
Application note PoE Powered Devices Debug Guidelines PDF | HTML 19 jul 2021
Application note PoE PD Schematic Review Guidelines PDF | HTML 29 abr 2021
Selection guide Power Management Guide 2018 (Rev. R) 25 jun 2018
Application note Lightning Surge Considerations for PoE Powered Devices 30 abr 2015

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS2379EVM-106 — Módulo de evaluación TPS2379

The Texas Instruments TPS2379EVM-106 evaluation module is a fully assembled and tested circuit for evaluating the TPS2379 IEEE 802.3at PoE High-Power PD Interface with External Gate Driver.


In need of IEEE802.3bt compliance? Check out the TPS2373

Guía del usuario: PDF
Modelo de simulación

TPS2379 Unencrypted PSpice Transient Model Package (Rev. A)

SLVM996A.ZIP (30 KB) - PSpice Model
Herramienta de cálculo

SLUC480 PoE PD Efficiency Calculator

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Dispositivos alimentados
TPS2375 PD de PoE de clase 3 con protección de cierre TPS23750 PD de PoE de clase 3 con controlador CC-CC de retorno TPS23751 Interfaz de PoE IEEE 802.3at con controlador CC-CC de retorno TPS23752 Interfaz de PoE IEEE 802.3at con controlador CC-CC de retorno y función de modo de suspensión TPS23753 Interfaz de PoE IEEE 802.3-2005 y convertidor y controlador aislado TPS23753A Interfaz de PoE IEEE 802.3-2005 y controlador de convertidor aislado con paso a través de ESD mejora TPS23754 Interfaz de PoE IEEE 802.3at, alta eficiencia y controlador CC/CC TPS23754-1 Interfaz de PoE IEEE 802.3at y controlador convertidor aislado TPS23756 PD de PoE de clase 4 con controlador CC-CC de retorno/avance y compatibilidad con adaptador de 12 V- TPS23757 PD de PoE de clase 3 con controlador CC-CC de retorno/avance y compatibilidad con adaptador de 12 V- TPS2376 PD de PoE de clase 3 con umbral UVLO ajustable y protección de cierre TPS2377 PD de PoE de clase 3 con umbral UVLO heredado y protección de cierre TPS2378 Interfaz PD de alta potencia de PoE IEEE 802.3at con control AUX TPS23785B PD de PoE de alta potencia y alta eficiencia y controlador CC a CC TPS2379 Interfaz PD de alta potencia IEEE 802.3at de PoE con controlador de puerta externo
Herramienta de simulación

PSPICE-FOR-TI — PSpice® para herramienta de diseño y simulación de TI

PSpice® para TI es un entorno de diseño y simulación que ayuda a evaluar la funcionalidad de los circuitos analógicos. Esta completa suite de diseño y simulación utiliza un motor de análisis analógico de Cadence®. Disponible sin ningún costo, PSpice para TI incluye una de las bibliotecas de modelos (...)
Diseños de referencia

PMP7499 — PoE no estándar (>25.5 W): Diseño de referencia de convertidor de avance de alta eficiencia (12 V a

This converter provides a high power PoE output of 12V/5A. The TPS2379 PD controller allows the use of an external hot swap FET for increased efficiency. The UCC2897A PWM controller is used to implement a high efficiency active clamp forward converter.
Test report: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HSOIC (DDA) 8 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos