The TPS25221 is intended for applications where heavy capacitive loads and short circuits may be encountered. The programmable current-limit threshold maybe set between 275 mA and 2.7 A (typical) using an external resistor. ILIMIT accuracy as tight as ±6% can be achieved at the higher current-limit settings. Power-switch rise and fall times are controlled to minimize current surges during turn on and turn off.
When a load attempts to draw current exceeding the programmed ILIMIT the internal FET enters constant current mode in order to keep ILOAD at or below ILIMIT. The FAULT output will assert low during over-current conditions after the built in de-glitch time.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | TPS25221 2.5-V to 5.5-V, 2-A Continuous Current Limited Switch datasheet (Rev. D) | PDF | HTML | 11 dic 2019 |
| Certificate | TPS25221 UL Certificate of Compliance IEC 62368-1 | 14 ago 2020 | ||
| Application note | Power Switch Fault Glitch Solution During Power Up (Rev. A) | PDF | HTML | 09 abr 2020 | |
| User guide | TPS25221 Evaluation Module (Rev. A) | 23 sep 2019 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
| WSON (DRV) | 6 | Ultra Librarian |
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.