Inicio Administración de potencia Interruptores y controladores de protección de potencia Fusibles electrónicos (intercambios en caliente integrados)

TPS25982

ACTIVO

eFuse de 15 A, 2.7 V a 24 V, 2.7 mΩ, con protección de intercambio en caliente, monitor de corriente

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
TPS25983 ACTIVO EFuse de intercambio en caliente integrado de 2.7 mΩ, 20 A y 2.7 V a 26 V con monitor de corriente y Supports higher current and higher voltage

Detalles del producto

Vabsmax_cont (V) 30 Vin (max) (V) 24 Vin (min) (V) 2.7 Current limit (max) (A) 15 Current limit (min) (A) 2 Features Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Short-circuit protection, Thermal shutdown, adjustable UVLO UL recognition IEC62368, UL2367 Overcurrent response Circuit breaker, Current limiting Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 2.7 Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.0008 Quiescent current (Iq) (max) (A) 0.0012 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
Vabsmax_cont (V) 30 Vin (max) (V) 24 Vin (min) (V) 2.7 Current limit (max) (A) 15 Current limit (min) (A) 2 Features Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Short-circuit protection, Thermal shutdown, adjustable UVLO UL recognition IEC62368, UL2367 Overcurrent response Circuit breaker, Current limiting Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 2.7 Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.0008 Quiescent current (Iq) (max) (A) 0.0012 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
VQFN (RGE) 24 16 mm² (4 mm × 4 mm)
  • Wide input voltage range: 2.7V to 24V
    • 30V absolute maximum
  • Low On-Resistance: RON = 2.7mΩ typical
  • Adjustable current limit threshold
    • Range: 2A to 15A
    • Accuracy: ± 8% (typical for ILIM > 5A)
  • Circuit breaker and current limiter options
  • Adjustable over-current blanking timer
    • Handles load transients without tripping
  • Accurate current monitor output
    • ± 1.5% (typical at 25°C for IOUT > 3A)
  • User configurable fault response
    • Latch-off or auto-retry
    • Number of retries (Finite or indefinite)
    • Delay between retries
  • Robust short-circuit protection
    • Fast-trip response time < 400ns typical
    • Tested against 1 million power-into-short events
    • Immune to line transients - no nuisance tripping
  • Adjustable output slew rate (dVdt) control
  • Adjustable undervoltage lockout
  • Overvoltage lockout (Fixed 3.7V, 7.6V, 16.9V and no-OVLO options)
  • Integrated overtemperature protection
  • Power good indication
  • Adjustable load detect and handshake timer
  • UL 2367 Recognition
    • File no. E339631
    • RILIM ≥ 182Ω
  • IEC 62368 CB Certification
  • Small footprint: 4mm × 4mm QFN package
  • Wide input voltage range: 2.7V to 24V
    • 30V absolute maximum
  • Low On-Resistance: RON = 2.7mΩ typical
  • Adjustable current limit threshold
    • Range: 2A to 15A
    • Accuracy: ± 8% (typical for ILIM > 5A)
  • Circuit breaker and current limiter options
  • Adjustable over-current blanking timer
    • Handles load transients without tripping
  • Accurate current monitor output
    • ± 1.5% (typical at 25°C for IOUT > 3A)
  • User configurable fault response
    • Latch-off or auto-retry
    • Number of retries (Finite or indefinite)
    • Delay between retries
  • Robust short-circuit protection
    • Fast-trip response time < 400ns typical
    • Tested against 1 million power-into-short events
    • Immune to line transients - no nuisance tripping
  • Adjustable output slew rate (dVdt) control
  • Adjustable undervoltage lockout
  • Overvoltage lockout (Fixed 3.7V, 7.6V, 16.9V and no-OVLO options)
  • Integrated overtemperature protection
  • Power good indication
  • Adjustable load detect and handshake timer
  • UL 2367 Recognition
    • File no. E339631
    • RILIM ≥ 182Ω
  • IEC 62368 CB Certification
  • Small footprint: 4mm × 4mm QFN package

The TPS25982 family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices are operational over a wide input voltage range. A single part caters to low-voltage systems needing minimal I*R voltage drop as well as higher voltage, high current systems needing low power dissipation. They are a robust defense against overloads, short-circuits, voltage surges and excessive inrush current.

Overvoltage events are limited by internal cutoff circuits, with multiple device options to select the overvoltage threshold.

Multiple device options exist to select between the response to overcurrent conditions, circuit breaker or active current limiter. The overcurrent limit and fast-trip (short-circuit) threshold can be set with one external resistor. The devices intelligently manage the overcurrent response by distinguishing between transient events and actual faults, thereby allowing the system to function uninterrupted during line and load transients without compromising on the robustness of the protection against faults. The device can be configured to stay latched off or retry automatically after a fault shutdown. The number of auto-retries as well as the retry delay are configurable with capacitors. This enables remote systems to automatically recover from temporary faults while ensuring that power supplies are not stressed indefinitely due to a persistent fault.

The TPS25982 devices are available in a small 4mm × 4mm QFN package. The devices are characterized for operation over a junction temperature range from –15°C to 125°C.

The TPS25982 family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices are operational over a wide input voltage range. A single part caters to low-voltage systems needing minimal I*R voltage drop as well as higher voltage, high current systems needing low power dissipation. They are a robust defense against overloads, short-circuits, voltage surges and excessive inrush current.

Overvoltage events are limited by internal cutoff circuits, with multiple device options to select the overvoltage threshold.

Multiple device options exist to select between the response to overcurrent conditions, circuit breaker or active current limiter. The overcurrent limit and fast-trip (short-circuit) threshold can be set with one external resistor. The devices intelligently manage the overcurrent response by distinguishing between transient events and actual faults, thereby allowing the system to function uninterrupted during line and load transients without compromising on the robustness of the protection against faults. The device can be configured to stay latched off or retry automatically after a fault shutdown. The number of auto-retries as well as the retry delay are configurable with capacitors. This enables remote systems to automatically recover from temporary faults while ensuring that power supplies are not stressed indefinitely due to a persistent fault.

The TPS25982 devices are available in a small 4mm × 4mm QFN package. The devices are characterized for operation over a junction temperature range from –15°C to 125°C.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
TPS25980 ACTIVO eFuse inteligente de 3 mΩ, 2.7 V a 24 V, 8 A, con administración de fallas transitorias ajustable Footprint compatible eFuse with 15-A rating and 1.5% current monitor accuracy
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS25990 ACTIVO eFuse de 2.9 V a 16 V, 0.79 mΩ, 60 A con controlador de telemetría digital Much higher current, higher current density, better accuracy, stackable and PMBUS
TPS25981 ACTIVO eFuse de 2.7 V a 16 V, 10 A, 6 mΩ con temporizador de supresión de sobrecorriente transitoria eFuse with smaller package option.
TPS25985 ACTIVO eFuse compacto apilable de 4.5 V a 16 V, 0.59 mΩ, 80 A con monitor de corriente preciso y rápido eFuse with much higher current, higher current density, better accuracy and stackable.

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 12
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TPS25982 2.7V to 24V, 2.7mΩ, 15A Smart eFuse - Integrated Hot-Swap Protection With 1.5% Accurate Load Current Monitoring and Adjustable Transient Fault Management datasheet (Rev. D) PDF | HTML 20/05/2026
Nota sobre la aplicación How eFuse Ensures Integrated FET Operation in Safe Operating Area PDF | HTML 7/09/2022
Application brief Single Point Failure Protection for Motor Drives and PLC Systems PDF | HTML 30/06/2020
Información sobre seguridad funcional eFuse: Safety Certification and why it Matters 18/03/2020
Certificado TPS25982 UL Certificate of Compliance IEC 62368-1 17/01/2020
Libro electrónico 11 Ways to Protect Your Power Path 3/07/2019
Nota sobre la aplicación Reducing Power Loss and Overheating During Faults with eFuses 27/06/2019
Artículo técnico Optimizing power density with eFuses PDF | HTML 27/06/2019
Nota sobre la aplicación Minimizing System Down-time with Smart eFuses 12/06/2019
Artículo técnico How to improve your data-center efficiency using eFuses PDF | HTML 5/12/2018
Nota sobre la aplicación Basics of eFuses (Rev. A) 5/04/2018
Nota sobre la aplicación Power Multiplexing Using Load Switches and eFuses (Rev. A) 20/06/2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS259824OEVM — Módulo de evaluación de eFuse TPS259824O

El TPS259824OEVM permite evaluar el circuito de referencia del eFuse TPS259824O de TI. El dispositivo TPS259824O es un eFuse de 2.7 V a 24 V, 15 A con un FET integrado de 3 mΩ, protección programable contra baja tensión, sobrecorriente y corriente de irrupción, además de un número configurable de (...)

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Placa de evaluación

TPS259827LEVM — Módulo de evaluación de eFuse TPS259827L

El TPS259827LEVM permite evaluar el circuito de referencia del eFuse TPS259827L de TI. El dispositivo TPS259827L es un eFuse de 2.7 V a 24 V, 15 A con un FET integrado de 3 mΩ, protección programable contra baja tensión, sobrecorriente y corriente de irrupción, además de un número configurable de (...)

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

TPS259822L PSPICE TRANSIENT MODEL

SLVMD21.ZIP (178 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

TPS259822O PSPICE TRANSIENT MODEL

SLVMD20.ZIP (179 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

TPS259823L PSPICE TRANSIENT MODEL

SLVMD23.ZIP (178 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

TPS259823O PSPICE TRANSIENT MODEL

SLVMD22.ZIP (178 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

TPS259824L PSpice Transient Model

SLVMD36.ZIP (175 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

TPS259824O PSpice Transient Model

SLVMD37.ZIP (177 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

TPS259827L PSpice Transient Model (Rev. A)

SLVMD38A.ZIP (203 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

TPS259827LNRGE TINA-TI Transient Model

SLVMDC8.TSC (315 KB) - Modelo TINA-TI Spice
Productos y hardware compatibles
Modelo de simulación

TPS259827O PSpice Transient Model

SLVMD39.ZIP (168 KB) - Modelo PSpice
Productos y hardware compatibles
Herramienta de cálculo

SLVC779 — TPS25982xx Design Calculator

Productos y hardware compatibles
Herramienta de cálculo

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RGE) 24 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos