Inicio Gestión de la energía AC/DC & DC/DC converters (integrated FET)
Inicio
Gestión de la energía
AC/DC & DC/DC converters (integrated FET)

TPS62933

ACTIVO

Convertidor reductor síncrono de 3.8 V a 30 V, 3 A, 200 kHz a 2.2 MHz, bajo IQ en encapsulado SOT-58

Haga su pedido ahora
Hoja de datos

TPS62933

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Iout (max) (A) 3 Vin (min) (V) 3.8 Vin (max) (V) 30 Topology Buck Type Converter Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Enable, Light Load Efficiency, Over Current Protection, Soft Start Adjustable, Spread Spectrum, Synchronous Rectification Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 22 Rating Catalog Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000012
Iout (max) (A) 3 Vin (min) (V) 3.8 Vin (max) (V) 30 Topology Buck Type Converter Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Enable, Light Load Efficiency, Over Current Protection, Soft Start Adjustable, Spread Spectrum, Synchronous Rectification Control mode current mode Vout (min) (V) 0.8 Vout (max) (V) 22 Rating Catalog Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000012
SOT-5X3 (DRL) 8 3.36 mm² 2.1 x 1.6
  • Configured for a wide range of applications
    • 3.8-V to 30-V input voltage range
    • 0.8-V to 22-V output voltage range
    • Ultra-low quiescent current: 12 µA (TPS62932, TPS62933, and TPS62933P)
    • Integrated 76-mΩ and 32-mΩ MOSFETs
    • 0.8 V ± 1% reference voltage (25°C)
    • Maximum 98% duty cycle operation
    • Precision EN threshold
    • 2-A (TPS62932) and 3-A (TPS62933 and TPS62933x) continuous output current
    • –40°C to 150°C operating junction temperature
  • Numerous pin-compatible options
    • TPS62932, TPS62933, and TPS62933F with the SS pin for adjustable soft-start time
    • TPS62933P and TPS62933O with the PG pin for a power-good indicator
    • TPS62932, TPS62933, and TPS62933P with pulse frequency modulation (PFM) for high light-load efficiency
    • TPS62933F with forced continuous current modulation (FCCM)
    • TPS62933O with out-of-audio (OOA) feature
  • Ease of use and small solution size
    • Peak current control mode with internal compensation
    • 200-kHz to 2.2-MHz selectable frequency
    • EMI friendly with frequency spread spectrum (TPS62932, TPS62933, TPS62933P and TPS62933O)
    • Supports start-up with prebiased output
    • Cycle-by-cycle OC limit for both high-side and low-side MOSFETs
    • Non-latched protections for OTP, OCP, OVP, UVP, and UVLO
    • 1.6-mm × 2.1-mm SOT583 package
  • Create a custom design with the TPS6293x using the WEBENCH Power Designer
  • Configured for a wide range of applications
    • 3.8-V to 30-V input voltage range
    • 0.8-V to 22-V output voltage range
    • Ultra-low quiescent current: 12 µA (TPS62932, TPS62933, and TPS62933P)
    • Integrated 76-mΩ and 32-mΩ MOSFETs
    • 0.8 V ± 1% reference voltage (25°C)
    • Maximum 98% duty cycle operation
    • Precision EN threshold
    • 2-A (TPS62932) and 3-A (TPS62933 and TPS62933x) continuous output current
    • –40°C to 150°C operating junction temperature
  • Numerous pin-compatible options
    • TPS62932, TPS62933, and TPS62933F with the SS pin for adjustable soft-start time
    • TPS62933P and TPS62933O with the PG pin for a power-good indicator
    • TPS62932, TPS62933, and TPS62933P with pulse frequency modulation (PFM) for high light-load efficiency
    • TPS62933F with forced continuous current modulation (FCCM)
    • TPS62933O with out-of-audio (OOA) feature
  • Ease of use and small solution size
    • Peak current control mode with internal compensation
    • 200-kHz to 2.2-MHz selectable frequency
    • EMI friendly with frequency spread spectrum (TPS62932, TPS62933, TPS62933P and TPS62933O)
    • Supports start-up with prebiased output
    • Cycle-by-cycle OC limit for both high-side and low-side MOSFETs
    • Non-latched protections for OTP, OCP, OVP, UVP, and UVLO
    • 1.6-mm × 2.1-mm SOT583 package
  • Create a custom design with the TPS6293x using the WEBENCH Power Designer

The TPS6293x is a high-efficiency, easy-to-use synchronous buck converter with a wide input voltage range of 3.8 V to 30 V, and supports up to 2-A (TPS62932) and 3-A (TPS62933 and TPS62933x) continuous output current and 0.8-V to 22-V output voltage.

The device employs fixed-frequency peak current control mode for fast transient response and good line and load regulation. The optimized internal loop compensation eliminates external compensation components.

The TPS62932, TPS62933, and TPS62933P operate in pulse frequency modulation for high light load efficiency. The TPS62933F operates in forced continuous current modulation which maintains lower output ripple during all load conditions. The TPS62933O operates in out of audio mode to avoid audible noise.

The ULQ (ultra-low quiescent) feature is beneficial for long battery lifetime. The switching frequency can be set by the configuration of the RT pin in the range of 200 kHz to 2.2 MHz, which can optimize system efficiency, solution size, and bandwidth. The soft-start time of the TPS62932, TPS62933, and TPS62933F can be adjusted by the external capacitor at the SS pin. The TPS62932, TPS62933, TPS62933P and TPS62933O are featured with frequency spread spectrum, which helps with lowering down EMI noise.

The TPS6293x is in a small SOT583 (1.6 mm × 2.1 mm) package with 0.5-mm pin pitch, and has an optimized pinout for easy PCB layout and promotes good EMI performance.

The TPS6293x is a high-efficiency, easy-to-use synchronous buck converter with a wide input voltage range of 3.8 V to 30 V, and supports up to 2-A (TPS62932) and 3-A (TPS62933 and TPS62933x) continuous output current and 0.8-V to 22-V output voltage.

The device employs fixed-frequency peak current control mode for fast transient response and good line and load regulation. The optimized internal loop compensation eliminates external compensation components.

The TPS62932, TPS62933, and TPS62933P operate in pulse frequency modulation for high light load efficiency. The TPS62933F operates in forced continuous current modulation which maintains lower output ripple during all load conditions. The TPS62933O operates in out of audio mode to avoid audible noise.

The ULQ (ultra-low quiescent) feature is beneficial for long battery lifetime. The switching frequency can be set by the configuration of the RT pin in the range of 200 kHz to 2.2 MHz, which can optimize system efficiency, solution size, and bandwidth. The soft-start time of the TPS62932, TPS62933, and TPS62933F can be adjusted by the external capacitor at the SS pin. The TPS62932, TPS62933, TPS62933P and TPS62933O are featured with frequency spread spectrum, which helps with lowering down EMI noise.

The TPS6293x is in a small SOT583 (1.6 mm × 2.1 mm) package with 0.5-mm pin pitch, and has an optimized pinout for easy PCB layout and promotes good EMI performance.
open-in-new Buscar otro/a AC/DC & DC/DC converters (integrated FET)
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
TPS62932 ACTIVO Convertidor reductor síncrono con entrada de 3.8 V a 30 V, 2 A, 200 kHz a 2.2 MHz y bajo IQ en encap Lower current (2A) version
TPS62933F ACTIVO Convertidor reductor síncrono de 3.8 V a 30 V de entrada, 3 A, 200 kHz a 2.2 MHz en encapsulado SOT- Pin-to-pin solution with FCCM mode
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS563300 ACTIVO Convertidor reductor síncrono de 3.8 V a 28 V de entrada y 3 A en encapsulado SOT-583 30-VIN with adjustable frequency and lower Iq
TPS56339 ACTIVO Convertidor reductor síncrono de entrada de 4.5 V a 24 V y salida de 3 A 24-VIN maximum with SOT23-6 package.
TPS62933O ACTIVO Convertidor reductor síncrono de 3.8 V a 30 V, 3 A y 200 kHz a 2.2 MHz con modo Out-of-Audio™ en SOT With out-of-audio option

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 9
Tipo Título Fecha
* Data sheet TPS6293x 3.8-V to 30-V, 2-A, 3-A Synchronous Buck Converters in a SOT583 Package datasheet (Rev. D) PDF | HTML 08 ago 2022
Application note Peak Current Mode Converter Secondary Stage Filter Design for Low Ripple Power – Part II: Hybrid Sense Network PDF | HTML 27 feb 2024
Application note Create an Inverting Power Supply Using a TPS6293x Buck Converter With Internal Compensation (Rev. A) PDF | HTML 13 dic 2023
Application note 3-A DC/DC Buck Converter Selection Guide of Mid-Range VIN PDF | HTML 03 ago 2023
Application note Stability Analysis & Design of Internally-Compensated Peak Current Mode: Part II PDF | HTML 03 mar 2022
Application note Stability Analysis & Design of Internally-Compensated Peak Current Mode: Part I PDF | HTML 24 feb 2022
Certificate TPS62933EVM EU RoHS Declaration of Conformity (DoC) 18 jun 2021
EVM User's guide TPS62933EVM-129 3-A Regulator Evaluation Module PDF | HTML 02 jun 2021
Application note TPS62933 Thermal Performance with SOT583 Package PDF | HTML 11 may 2021

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS62933EVM — Módulo de evaluación TPS62933 para convertidor reductor síncrono de 3.8 V a 30 V, 3 A y 200 kHz a 2.

El módulo de evaluación (EVM) TPS62933EVM se utiliza para evaluar el TPS62933, un convertidor reductor síncrono fácil de usar y de alta eficiencia, que proporciona 5 V a 3 A desde una entrada de 3.8 V a 30 V. El TPS62933 es adecuado para sistemas alimentados por carriles de bus de alimentación de (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Modelo de simulación

TPS62933 PSpice Transient Model

SLUM790.ZIP (278 KB) - PSpice Model
Descargar
Modelo de simulación

TPS62933P PSpice Unencrypted Transient Model

SLUM818.ZIP (266 KB) - PSpice Model
Descargar
Diseños de referencia

TIDA-050053 — Diseño de referencia de fuente de alimentación de inversión con entrada de 8 V a 16 V, 1.2 A y -12 V

Este diseño de referencia de fuente de alimentación de inversión admite una tensión de salida de –12 V a una corriente de hasta 1.2 A desde una entrada de 8 V a 16 V. Esta tensión negativa es necesaria para muchas aplicaciones como la polarización de módulos ópticos, controladores de línea, (...)
Design guide: PDF
Paquete Pasadores Descargar
SOT-5X3 (DRL) 8 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos