Inicio Administración de potencia Reguladores conmutados CC/CC Convertidores de CC/CC
Inicio
Administración de potencia
Reguladores conmutados CC/CC
Convertidores de CC/CC
NUEVO

TPS63820

ACTIVO

Convertidores buck-boost de 4 A con baja corriente inactiva e interfaz I2C

Haga su pedido ahora
Hoja de datos

TPS63820

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Topology Buck-Boost Vin (max) (V) 5.5 Vin (min) (V) 1.8 Vout (max) (V) 5.5 Vout (min) (V) 1.2 Switch current limit (typ) (A) 7.2 Features Dynamic voltage scaling, Enable, I2C interface, Light-load efficiency, Load Disconnect, Low Quiescent Current, Output discharge, Overtemperature protection, Overvoltage protection, Power good, Prebias startup, Synchronous rectification, True Shutdown, UVLO fixed Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0000027 Duty cycle (max) (%) 100
Rating Catalog Topology Buck-Boost Vin (max) (V) 5.5 Vin (min) (V) 1.8 Vout (max) (V) 5.5 Vout (min) (V) 1.2 Switch current limit (typ) (A) 7.2 Features Dynamic voltage scaling, Enable, I2C interface, Light-load efficiency, Load Disconnect, Low Quiescent Current, Output discharge, Overtemperature protection, Overvoltage protection, Power good, Prebias startup, Synchronous rectification, True Shutdown, UVLO fixed Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0000027 Duty cycle (max) (%) 100
DSBGA (YBG) 15 2.550453 mm² 2.029 x 1.257
  • Input voltage range: 1.8V to 5.5V
    • 2.0V minimum input voltage for start-up
  • VOUT range: I2C-configurable 1.2V to 5.5V with 25mV step
  • Output current
    • Up to 3.5A for VIN ≥ 2.5V, VOUT = 3.3V
    • Up to 4A for VIN ≥ 3V, VOUT = 3.3V
  • High efficiency over the entire load range
    • Low 2.3µA operating quiescent current
    • Automatic power save mode, ultra-sonic mode, and forced PWM mode
    • 91.94% efficiency at VIN = 3.6V, VOUT = 3.3V, IOUT = 100µA (in buck-boost mode)
    • 95.33% efficiency at VIN = 3.6V, VOUT = 3.3V, IOUT = 2A (in buck-boost mode)
  • Supports 1.2V logic I/O
  • Three I2C target addresses available by ADDR pin connection
  • Programmable soft start time, current limit, and buck-boost window
  • Output discharge function
  • Safety and robust protection features
    • Overtemperature protection
    • Input and output overvoltage protection
    • True load disconnect during shutdown
    • Forward and backward current limit
    • Hiccup protection
  • Two device options:
    • TPS63820: Pre-programmed 3.3V VOUT
    • TPS638201: Program VOUT prior to start-up
  • 15-ball WCSP package (2.0mm × 1.2mm)
  • Input voltage range: 1.8V to 5.5V
    • 2.0V minimum input voltage for start-up
  • VOUT range: I2C-configurable 1.2V to 5.5V with 25mV step
  • Output current
    • Up to 3.5A for VIN ≥ 2.5V, VOUT = 3.3V
    • Up to 4A for VIN ≥ 3V, VOUT = 3.3V
  • High efficiency over the entire load range
    • Low 2.3µA operating quiescent current
    • Automatic power save mode, ultra-sonic mode, and forced PWM mode
    • 91.94% efficiency at VIN = 3.6V, VOUT = 3.3V, IOUT = 100µA (in buck-boost mode)
    • 95.33% efficiency at VIN = 3.6V, VOUT = 3.3V, IOUT = 2A (in buck-boost mode)
  • Supports 1.2V logic I/O
  • Three I2C target addresses available by ADDR pin connection
  • Programmable soft start time, current limit, and buck-boost window
  • Output discharge function
  • Safety and robust protection features
    • Overtemperature protection
    • Input and output overvoltage protection
    • True load disconnect during shutdown
    • Forward and backward current limit
    • Hiccup protection
  • Two device options:
    • TPS63820: Pre-programmed 3.3V VOUT
    • TPS638201: Program VOUT prior to start-up
  • 15-ball WCSP package (2.0mm × 1.2mm)

The TPS63820 and TPS638201 are low quiescent current, high output current buck-boost converters fully programmable through I2C. The 2.3µA quiescent current and four low Rdson MOSFETs enable high efficiency from a light to a heavy load range.

Depending on the input voltage, the devices automatically operate in boost, buck, or in buck-boost mode when the input voltage is approximately equal to the output voltage. The transitions between modes occur at defined thresholds and avoid unwanted toggling within the modes which reduces output voltage ripple.

The devices have a fast dynamic response, which enables the regulation of output voltage tightly, even in the event of heavy load transients.

The devices offer a small solution size in WCSP. The solution size is <20mm2 with only four external components.

The TPS63820 and TPS638201 are low quiescent current, high output current buck-boost converters fully programmable through I2C. The 2.3µA quiescent current and four low Rdson MOSFETs enable high efficiency from a light to a heavy load range.

Depending on the input voltage, the devices automatically operate in boost, buck, or in buck-boost mode when the input voltage is approximately equal to the output voltage. The transitions between modes occur at defined thresholds and avoid unwanted toggling within the modes which reduces output voltage ripple.

The devices have a fast dynamic response, which enables the regulation of output voltage tightly, even in the event of heavy load transients.

The devices offer a small solution size in WCSP. The solution size is <20mm2 with only four external components.
filter Buscar otro/a Convertidores de CC/CC
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet TPS63820 – Low Quiescent Current, 4A Buck-Boost Converters with I2C Interface datasheet PDF | HTML 09 mar 2026
EVM User's guide TPS63820 Evaluation Module PDF | HTML 10 mar 2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS63820EVM — TPS63820 evaluation module

The TPS63820EVM features a highly-efficient, single-inductor, internally compensated, low quiescent current, 4A buck-boost converter in a 15-pin, 2.0mm × 1.2mm × 0.5mm DSBGA package. The output voltage is programmable from 1.2V to 5.5V in 25mV increments through I²C.
Guía del usuario: PDF | HTML
No disponible en TI.com
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YBG) 15 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos