Inicio Administración de potencia Circuitos integrados multicanal (PMIC)

TPS657095

ACTIVO

PMIC de módulo de cámara integrada

Detalles del producto

Product type Camera sensor Regulated outputs (#) 2 Step-down DC/DC converter 0 Step-up DC/DC converter 0 LDO 2 Vin (min) (V) 3.7 Vin (max) (V) 6 Iout (max) (A) 0.1 Configurability Software configurable Features Enable pin, I2C control, Thermal shutdown, UVLO fixed Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.025 Shutdown current (ISD) (typ) (µA) 45
Product type Camera sensor Regulated outputs (#) 2 Step-down DC/DC converter 0 Step-up DC/DC converter 0 LDO 2 Vin (min) (V) 3.7 Vin (max) (V) 6 Iout (max) (A) 0.1 Configurability Software configurable Features Enable pin, I2C control, Thermal shutdown, UVLO fixed Rating Catalog Operating temperature range (°C) -40 to 85 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.025 Shutdown current (ISD) (typ) (µA) 45
DSBGA (YFF) 16 3.24 mm² (— mm × — mm)
  • Two 100mA LDOs
  • Output Voltage Accuracy ±1.5%
  • VIN Range From 3.7V to 6V
  • LED Driver with PWM Dimming
  • 1 GPO
  • 1 GPIO
  • I2C™ Interface
  • 4KByte User OTP memory
  • Available in 16-Ball DSBGA with 0.4mm Pitch
  • Two 100mA LDOs
  • Output Voltage Accuracy ±1.5%
  • VIN Range From 3.7V to 6V
  • LED Driver with PWM Dimming
  • 1 GPO
  • 1 GPIO
  • I2C™ Interface
  • 4KByte User OTP memory
  • Available in 16-Ball DSBGA with 0.4mm Pitch

The TPS657095 is a power management unit targeted for embedded camera modules or other portable low power consumer end equipments. It contains two LDOs enabled by the I2C™ Interface, a PWM-dimmable current sink for driving one LED, one general purpose output (GPO), a programmable clock generator and 4K Byte of User OTP memory. The operation of the device is disabled if the input voltage supply is below the internal undervoltage lockout.

The device comes in a 16-ball die-size ball grid array package (DSBGA) with 0.4mm ball pitch.

The TPS657095 is a power management unit targeted for embedded camera modules or other portable low power consumer end equipments. It contains two LDOs enabled by the I2C™ Interface, a PWM-dimmable current sink for driving one LED, one general purpose output (GPO), a programmable clock generator and 4K Byte of User OTP memory. The operation of the device is disabled if the input voltage supply is below the internal undervoltage lockout.

The device comes in a 16-ball die-size ball grid array package (DSBGA) with 0.4mm ball pitch.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TPS657095 PMU for Embedded Camera Module datasheet (Rev. A) PDF | HTML 23/02/2016
Nota sobre la aplicación LDO Noise Demystified (Rev. B) PDF | HTML 18/08/2020
Nota sobre la aplicación LDO PSRR Measurement Simplified (Rev. A) PDF | HTML 9/08/2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS657095EVM-122 — Módulo de evaluación TPS657095 de PMU para cámara integrada

The TPS657095 is a power management unit targeted for embedded camera modules or other portable low power consumer end equipments. It contains two LDOs enabled by the I2C™ Interface, a PWM-dimmable current sink for driving one LED, one general purpose output (GPO), a programmable clock (...)

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
GUI para el módulo de evaluación (EVM)

IPG-UI — IPG-UI EVM GUI (Windows Installer)

La GUI IPG-UI se puede usar para configurar varios dispositivos PMIC a fin de evaluar las características y el rendimiento de dichos dispositivos.  Esta GUI se creó mediante tecnologías basadas en web y admite la interacción con el hardware EVM mediante una placa (...)

Productos y hardware compatibles
GUI para el módulo de evaluación (EVM)

IPG-UI-LINUX — IPG-UI EVM GUI (Linux Installer)

La GUI IPG-UI se puede usar para configurar varios dispositivos PMIC a fin de evaluar las características y el rendimiento de dichos dispositivos.  Esta GUI se creó mediante tecnologías basadas en web y admite la interacción con el hardware EVM mediante una placa (...)

Productos y hardware compatibles
GUI para el módulo de evaluación (EVM)

IPG-UI-OSX — IPG-UI EVM GUI (OSX Installer)

La GUI IPG-UI se puede usar para configurar varios dispositivos PMIC a fin de evaluar las características y el rendimiento de dichos dispositivos.  Esta GUI se creó mediante tecnologías basadas en web y admite la interacción con el hardware EVM mediante una placa (...)

Productos y hardware compatibles
GUI para el módulo de evaluación (EVM)

SLVC635 — TPS657095 Installer Support Pack for IPG-UI GUI

Productos y hardware compatibles
Modelo de simulación

TPS657095 IBIS MODEL

SLVMBA7.ZIP (72 KB) - Modelo IBIS
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YFF) 16 Ultra Librarian

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos