Inicio Administración de potencia Reguladores lineales y de baja salida (LDO)

TPS7A87

ACTIVO

Regulador de tensión de caída ultrabaja ajustable de 500 mA, bajo ruido, PSRR alto y doble canal

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS7A90 ACTIVO Regulador de tensión de caída ultrabaja ajustable 500 mA, ruido bajo y PSRR alta con alta precisión 500-mA low noise (4.7-µVrms) LDO in a small package (2.5 mm x 2.5 mm)
Funcionalidad similar a la del dispositivo comparado
TLV751 ACTIVO Regulador de tensión de caída baja (LDO), canal doble, alta PSRR, baja IQ, 500 mA 500-mA dual LDO with lower IQ in a smaller package.

Detalles del producto

Rating Catalog Vin (max) (V) 6.5 Vin (min) (V) 1.4 Iout (max) (A) 0.5 Output options Adjustable Output, Dual output Vout (max) (V) 5.2 Vout (min) (V) 0.8 Noise (µVrms) 3.8 PSRR at 100 KHz (dB) 48 Iq (typ) (mA) 2.1 Features Enable, Foldback Overcurrent protection, Power good, Soft start Thermal resistance θJA (°C/W) 33 Load capacitance (min) (µF) 10 Regulated outputs (#) 2 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 75 Operating temperature range (°C) -40 to 125
Rating Catalog Vin (max) (V) 6.5 Vin (min) (V) 1.4 Iout (max) (A) 0.5 Output options Adjustable Output, Dual output Vout (max) (V) 5.2 Vout (min) (V) 0.8 Noise (µVrms) 3.8 PSRR at 100 KHz (dB) 48 Iq (typ) (mA) 2.1 Features Enable, Foldback Overcurrent protection, Power good, Soft start Thermal resistance θJA (°C/W) 33 Load capacitance (min) (µF) 10 Regulated outputs (#) 2 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 75 Operating temperature range (°C) -40 to 125
WQFN (RTJ) 20 16 mm² (4 mm × 4 mm)
  • Two Independent LDO Channels
  • Low Output Noise: 3.8 µVRMS (10 Hz–100 kHz)
  • Low Dropout: 100 mVMAX at 0.5 A
  • Wide Input Voltage Range: 1.4 V to 6.5 V
  • Wide Output Voltage Range: 0.8 V to 5.2 V
  • High Power-Supply Ripple Rejection:
    • 75 dB at DC
    • 40 dB at 100 kHz
    • 40 dB at 1 MHz
  • 1.0% Accuracy Over Line, Load, and Temperature
  • Excellent Load Transient Response
  • Adjustable Start-Up In-Rush Control
  • Selectable Soft-Start Charging Current
  • Independent Open-Drain Power-Good (PGx) Outputs
  • Stable with a 10 µF or Larger Ceramic Output Capacitor
  • 4-mm × 4-mm, 20-Pin WQFN Package
  • Two Independent LDO Channels
  • Low Output Noise: 3.8 µVRMS (10 Hz–100 kHz)
  • Low Dropout: 100 mVMAX at 0.5 A
  • Wide Input Voltage Range: 1.4 V to 6.5 V
  • Wide Output Voltage Range: 0.8 V to 5.2 V
  • High Power-Supply Ripple Rejection:
    • 75 dB at DC
    • 40 dB at 100 kHz
    • 40 dB at 1 MHz
  • 1.0% Accuracy Over Line, Load, and Temperature
  • Excellent Load Transient Response
  • Adjustable Start-Up In-Rush Control
  • Selectable Soft-Start Charging Current
  • Independent Open-Drain Power-Good (PGx) Outputs
  • Stable with a 10 µF or Larger Ceramic Output Capacitor
  • 4-mm × 4-mm, 20-Pin WQFN Package

The TPS7A87 is a dual, low-noise (3.8 µVRMS), low-dropout (LDO) voltage regulator capable of sourcing 500 mA per channel with only 100 mV of maximum dropout.

The TPS7A87 provides the flexibility of two independent LDOs and approximately 30% smaller solution size than two single-channel LDOs. Each output is adjustable with external resistors from 0.8 V to 5.2 V. The wide input-voltage range of the TPS7A87 supports operation as low as 1.4 V and up to 6.5 V.

With 1% output voltage accuracy (over line, load, and temperature) and soft-start capabilities to reduce in-rush current, the TPS7A87 is ideal for powering sensitive analog low-voltage devices [such as voltage-controlled oscillators (VCOs), analog-to-digital converters (ADCs), digital-to-analog converters (DACs), complementary metal oxide semiconductor (CMOS) sensors, and video application-specific integrated circuits (ASICs)].

The TPS7A87 is designed to power noise-sensitive components such as those found in instrumentation, medical, video, professional audio, test and measurement, and high-speed communication applications. The very low 3.8-µVRMS output noise and wideband PSRR (40 dB at 1 MHz) minimizes phase noise and clock jitter. These features maximize the performance of clocking devices, ADCs, and DACs.

The TPS7A87 is a dual, low-noise (3.8 µVRMS), low-dropout (LDO) voltage regulator capable of sourcing 500 mA per channel with only 100 mV of maximum dropout.

The TPS7A87 provides the flexibility of two independent LDOs and approximately 30% smaller solution size than two single-channel LDOs. Each output is adjustable with external resistors from 0.8 V to 5.2 V. The wide input-voltage range of the TPS7A87 supports operation as low as 1.4 V and up to 6.5 V.

With 1% output voltage accuracy (over line, load, and temperature) and soft-start capabilities to reduce in-rush current, the TPS7A87 is ideal for powering sensitive analog low-voltage devices [such as voltage-controlled oscillators (VCOs), analog-to-digital converters (ADCs), digital-to-analog converters (DACs), complementary metal oxide semiconductor (CMOS) sensors, and video application-specific integrated circuits (ASICs)].

The TPS7A87 is designed to power noise-sensitive components such as those found in instrumentation, medical, video, professional audio, test and measurement, and high-speed communication applications. The very low 3.8-µVRMS output noise and wideband PSRR (40 dB at 1 MHz) minimizes phase noise and clock jitter. These features maximize the performance of clocking devices, ADCs, and DACs.

Descargar Ver vídeo con transcripción Video

Consulte productos similares en el inventario de TI.com

Productos con especificaciones similares, ordenados por inventario disponible en TI.com.

Ver ahora

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TPS7A87 Dual, 500-mA, Low-Noise (3.8 μVRMS), LDO Voltage Regulator datasheet (Rev. A) PDF | HTML 12/07/2016
Informe Parallel LDO Architecture Design Using Ballast Resistors PDF | HTML 14/12/2022
Informe Comprehensive Analysis and Universal Equations for Parallel LDO's Using Ballast PDF | HTML 13/12/2022
Nota sobre la aplicación High-Performance CMOS Image Sensor Power Supply in Industrial Camera and Vision (Rev. A) 30/07/2021

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS7A8701EVM-852 — Módulo de evaluación de regulador de tensión LDO doble de 500 mA, ruido bajo (3.8 μVRMS) TPS7A87

El módulo de evaluación TPS7A8701EVM-852 está diseñado con una configuración típica para evaluar el funcionamiento y el rendimiento del TPS7A87, un regulador de tensión de caída baja doble de 500 mA. La placa de circuito EVM está configurada para ser un diseño de referencia para aplicaciones de (...)
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

TPS7A87 PSpice Transient Model

SBVM628.ZIP (90 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

TPS7A87 Unencrypted PSpice Transient Model

SBVM627.ZIP (3 KB) - Modelo PSpice
Productos y hardware compatibles
Diseño de referencia

TIDA-01434 — Diseño de referencia de ADC de 24 bits de alimentación bipolar aislada y sin transformador

Este diseño de referencia aislado de 3.65 mm delgado permite soluciones de entrada bipolar y alto rendimiento altamente integradas con un convertidor analógico a digital (ADC) sigma-delta de 24 bits. Los módulos modernos de entrada analógica necesitan un alto rendimiento en diferentes aspectos, (...)
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN (RTJ) 20 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos