Inicio Administración de potencia Reguladores lineales y de baja salida (LDO)

TPS7A91

ACTIVO

Regulador de tensión de caída ultrabaja ajustable de 1 A, ruido bajo, PSRR alto, con alta precisión

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS746 ACTIVO Regulador de tensión de caída ultrabaja ajustable de 1 A, IQ baja y alta precisión, con buena potenc 1A, adjustable output LDO with lower IQ and power good for cost-sensitive applications.
TLV759P ACTIVO Regulador de tensión de ultrabaja caída, ajustable, de alta precisión, baja IQ, de 1 A, con activaci 1A, adjustable output LDO with lower IQ for cost-sensitive applications.

Detalles del producto

Rating Catalog Vin (max) (V) 6.5 Vin (min) (V) 1.4 Iout (max) (A) 1 Output options Adjustable Output Vout (max) (V) 5.2 Vout (min) (V) 0.8 Noise (µVrms) 4.7 PSRR at 100 KHz (dB) 48 Iq (typ) (mA) 2.1 Features Enable, Foldback Overcurrent protection, Output discharge, Power good, Soft start Thermal resistance θJA (°C/W) 57 Load capacitance (min) (µF) 22 Regulated outputs (#) 1 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 130 Operating temperature range (°C) -40 to 125
Rating Catalog Vin (max) (V) 6.5 Vin (min) (V) 1.4 Iout (max) (A) 1 Output options Adjustable Output Vout (max) (V) 5.2 Vout (min) (V) 0.8 Noise (µVrms) 4.7 PSRR at 100 KHz (dB) 48 Iq (typ) (mA) 2.1 Features Enable, Foldback Overcurrent protection, Output discharge, Power good, Soft start Thermal resistance θJA (°C/W) 57 Load capacitance (min) (µF) 22 Regulated outputs (#) 1 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 130 Operating temperature range (°C) -40 to 125
WSON (DSK) 10 6.25 mm² (2.5 mm × 2.5 mm)
  • 1.0% Accuracy Over Line, Load, and Temperature
  • Low Output Noise: 4.7 µVRMS (10 Hz–100 kHz)
  • Low Dropout: 200 mV (max) at 1 A
  • Wide Input Voltage Range: 1.4 V to 6.5 V
  • Wide Output Voltage Range: 0.8 V to 5.2 V
  • High Power-Supply Ripple Rejection (PSRR):
    • 70 dB at DC
    • 40 dB at 100 kHz
    • 40 dB at 1 MHz
  • Fast Transient Response
  • Adjustable Start-Up In-Rush Control with Selectable Soft-Start Charging Current
  • Open-Drain Power-Good (PG) Output
  • 2.5-mm × 2.5-mm, 10-Pin SON Package
  • 1.0% Accuracy Over Line, Load, and Temperature
  • Low Output Noise: 4.7 µVRMS (10 Hz–100 kHz)
  • Low Dropout: 200 mV (max) at 1 A
  • Wide Input Voltage Range: 1.4 V to 6.5 V
  • Wide Output Voltage Range: 0.8 V to 5.2 V
  • High Power-Supply Ripple Rejection (PSRR):
    • 70 dB at DC
    • 40 dB at 100 kHz
    • 40 dB at 1 MHz
  • Fast Transient Response
  • Adjustable Start-Up In-Rush Control with Selectable Soft-Start Charging Current
  • Open-Drain Power-Good (PG) Output
  • 2.5-mm × 2.5-mm, 10-Pin SON Package

The TPS7A91 is a low-noise (4.7 µVRMS), low-dropout (LDO) voltage regulator capable of sourcing 1 A with only 200 mV of maximum dropout.

The TPS7A91 output is adjustable with external resistors from 0.8 V to 5.2 V. The TPS7A91 wide input-voltage range supports operation as low as 1.4 V and up to 6.5 V.

With 1% output voltage accuracy (over line, load, and temperature) and soft-start capabilities to reduce in-rush current, the TPS7A91 is ideal for powering sensitive analog low-voltage devices [such as voltage-controlled oscillators (VCOs), analog-to-digital converters (ADCs), digital-to-analog converters (DACs), high-end processors, and field-programmable gate arrays (FPGAs)].

The TPS7A91 is designed to power noise-sensitive components such as those found in high-speed communication, video, medical, or test and measurement applications. The very low 4.7-µVRMS output noise and wideband PSRR (40 dB at 1 MHz) minimizes phase noise and clock jitter. These features maximize performance of clocking devices, ADCs, and DACs.

The TPS7A91 is a low-noise (4.7 µVRMS), low-dropout (LDO) voltage regulator capable of sourcing 1 A with only 200 mV of maximum dropout.

The TPS7A91 output is adjustable with external resistors from 0.8 V to 5.2 V. The TPS7A91 wide input-voltage range supports operation as low as 1.4 V and up to 6.5 V.

With 1% output voltage accuracy (over line, load, and temperature) and soft-start capabilities to reduce in-rush current, the TPS7A91 is ideal for powering sensitive analog low-voltage devices [such as voltage-controlled oscillators (VCOs), analog-to-digital converters (ADCs), digital-to-analog converters (DACs), high-end processors, and field-programmable gate arrays (FPGAs)].

The TPS7A91 is designed to power noise-sensitive components such as those found in high-speed communication, video, medical, or test and measurement applications. The very low 4.7-µVRMS output noise and wideband PSRR (40 dB at 1 MHz) minimizes phase noise and clock jitter. These features maximize performance of clocking devices, ADCs, and DACs.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 7
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TPS7A91 1-A, High-Accuracy, Low-Noise LDO Voltage Regulator datasheet PDF | HTML 13/12/2016
Informe Demystifying LDO Turn-On (Start-Up) Time (Rev. B) PDF | HTML 10/03/2026
Informe Reduce System Noise Using Parallel LDOs PDF | HTML 3/11/2025
Informe Parallel LDO Architecture Design Using Ballast Resistors PDF | HTML 14/12/2022
Informe Comprehensive Analysis and Universal Equations for Parallel LDO's Using Ballast PDF | HTML 13/12/2022
Artículo técnico LDO basics: noise – how a feed-forward capacitor improves system performance PDF | HTML 25/07/2017
Artículo técnico LDO basics: noise – how a noise-reduction pin improves system performance PDF | HTML 14/06/2017

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS7A91EVM-831 — Regulador (LDO) de caída baja de 1 A, ruido bajo, tensión de entrada baja para módulo de evaluación

El módulo de evaluación TPS7A91EVM-831 está diseñado con una configuración típica para evaluar el funcionamiento y el rendimiento del TPS7A91, un regulador de tensión de baja caída de alta exactitud y 1 A. La placa de circuito del EVM está configurada para ser un diseño de referencia para (...)
Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

TPS7A91 PSpice Transient Model

SBVM662.ZIP (92 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

TPS7A91 Unencrypted PSpice Transient Model

SBVM661.ZIP (2 KB) - Modelo PSpice
Productos y hardware compatibles
Herramienta de cálculo

PARALLEL-LDO-CALC — Parallel low-dropout (LDO) calculator

La calculadora de caída baja (LDO) en paralelo es una herramienta basada en Microsoft® Excel® que proporciona el análisis de los peores casos de reguladores LDO en paralelo que utilizan resistencias de balasto. La herramienta ayuda al usuario a identificar el número mínimo de reguladores LDO en (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WSON (DSK) 10 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos