Inicio Gestión de la energía DC/DC power modules Módulos de alimentación (inductor integrado)
Inicio
Gestión de la energía
DC/DC power modules
Módulos de alimentación (inductor integrado)
NUEVO

TPSM843620

ACTIVO

4-V to 18-V input, advanced current mode, 6-A synchronous SWIFT™ step-down power module

Haga su pedido ahora
Hoja de datos

TPSM843620

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Iout (max) (A) 6 Vin (max) (V) 18 Vin (min) (V) 4 Vout (max) (V) 5.5 Vout (min) (V) 0.5 Rating Catalog Operating temperature range (°C) -40 to 125 Features Adjustable current limit, Enable, Forced PWM, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable Control mode ACM/AECM Switching frequency (max) (Hz) 2200000 Switching frequency (min) (Hz) 500000
Iout (max) (A) 6 Vin (max) (V) 18 Vin (min) (V) 4 Vout (max) (V) 5.5 Vout (min) (V) 0.5 Rating Catalog Operating temperature range (°C) -40 to 125 Features Adjustable current limit, Enable, Forced PWM, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable Control mode ACM/AECM Switching frequency (max) (Hz) 2200000 Switching frequency (min) (Hz) 500000
USIP (SIT) 15 See data sheet
  • Fixed-frequency, internally-compensated advanced current mode (ACM) control
  • Small form factor 3.5-mm × 3.5-mm × 1.6-mm, 15-pin DFM package MicroSiP power module
  • High-efficiency, integrated 25-mΩ and 6.5-mΩ MOSFETs, inductor and basic passives
  • 4-V to 18-V input voltage range
  • 0.5-V to 5.5 -V output voltage range
  • Three selectable PWM ramp options to optimize the control loop performance
  • Five selectable switching frequencies: 500 kHz, 750 kHz, 1 MHz, 1.5 MHz, and 2.2 MHz
  • Synchronizable to an external clock
  • 0.5-V, ±0.5% voltage reference accuracy over full temperature range
  • Selectable soft-start times: 0.5 ms, 1 ms, 2 ms, and 4 ms
  • Monotonic start-up into prebiased outputs
  • Selectable current limits to support lower current operation
  • Enable with adjustable input undervoltage lockout
  • Power-good output monitor
  • Output overvoltage, output undervoltage, input undervoltage, overcurrent, and overtemperature protection
  • Pin-to-pin compatible with 8 A - TPSM843820 3 A - TPSM843320
  • – 40°C to 125°C operating junction temperature
  • Fixed-frequency, internally-compensated advanced current mode (ACM) control
  • Small form factor 3.5-mm × 3.5-mm × 1.6-mm, 15-pin DFM package MicroSiP power module
  • High-efficiency, integrated 25-mΩ and 6.5-mΩ MOSFETs, inductor and basic passives
  • 4-V to 18-V input voltage range
  • 0.5-V to 5.5 -V output voltage range
  • Three selectable PWM ramp options to optimize the control loop performance
  • Five selectable switching frequencies: 500 kHz, 750 kHz, 1 MHz, 1.5 MHz, and 2.2 MHz
  • Synchronizable to an external clock
  • 0.5-V, ±0.5% voltage reference accuracy over full temperature range
  • Selectable soft-start times: 0.5 ms, 1 ms, 2 ms, and 4 ms
  • Monotonic start-up into prebiased outputs
  • Selectable current limits to support lower current operation
  • Enable with adjustable input undervoltage lockout
  • Power-good output monitor
  • Output overvoltage, output undervoltage, input undervoltage, overcurrent, and overtemperature protection
  • Pin-to-pin compatible with 8 A - TPSM843820 3 A - TPSM843320
  • – 40°C to 125°C operating junction temperature

TPSM843620 is a highly efficient, small, and flexible synchronous step-down DC-DC converter in a MicroSiP power module package that is easy to use. The module operates up to 18-V input with fixed-frequencies that are resistor adjustable by system designer. The embedded IC is internally compensated which reduces external components and design size. The integrated high-frequency capacitor reduces the transient peak at switching node.

The TPSM843620 module employs an internally compensated, fixed-frequency advanced current mode control. The device is capable of providing high efficiency while running at a switching frequency up to 2.2 MHz. The fixed frequency controller can operate from 500 kHz to 2.2 MHz and can be synchronized to an external clock using the SYNC pin. Additional features include a high accuracy voltage reference, selectable soft-start times, monotonic start-up into prebiased outputs, selectable current limits, adjustable UVLO through the EN pin, and a full suite of fault protections.

TPSM843620 is a highly efficient, small, and flexible synchronous step-down DC-DC converter in a MicroSiP power module package that is easy to use. The module operates up to 18-V input with fixed-frequencies that are resistor adjustable by system designer. The embedded IC is internally compensated which reduces external components and design size. The integrated high-frequency capacitor reduces the transient peak at switching node.

The TPSM843620 module employs an internally compensated, fixed-frequency advanced current mode control. The device is capable of providing high efficiency while running at a switching frequency up to 2.2 MHz. The fixed frequency controller can operate from 500 kHz to 2.2 MHz and can be synchronized to an external clock using the SYNC pin. Additional features include a high accuracy voltage reference, selectable soft-start times, monotonic start-up into prebiased outputs, selectable current limits, adjustable UVLO through the EN pin, and a full suite of fault protections.
open-in-new Buscar otro/a Módulos de alimentación (inductor integrado)
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
NUEVO TPSM843820 ACTIVO Módulo de alimentación reductor SWIFT™ síncrono de 8 A con entrada de 4 V a 18 V, modo de corriente Optimized for higher current in same form factor

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 5
Tipo Título Fecha
* Data sheet TPSM843620 4-V to 18-V Input, 6-A SynchronousSWIFTStep-Down ConverterMicroSiPPower Module With Integrated Inductor and Internally Compensated Advanced Current Mode Control datasheet (Rev. A) PDF | HTML 01 dic 2023
Application note Detailed Comparison Between TPSM843620 Family and TPS543620 Family PDF | HTML 20 nov 2023
EVM User's guide TPSM843620 SWIFT™ Step-Down Module Evaluation Module User's Guide PDF | HTML 25 oct 2023
Certificate TPSM843620EVM EU Declaration of Conformity (DoC) 20 sep 2023
Application brief Solving Power Design Challenges in Medical Imaging Applications PDF | HTML 12 jul 2023

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPSM843620EVM — TPSM843620 evaluation module for synchronous buck converter

The TPSM843620 evaluation module (EVM) is a synchronous buck power module designed to provide up to a 6 A output and is rated for 4 V to 18 V. The high-side and low-side MOSFETs are incorporated inside the TPSM843620 package along with the gate-drive circuitry, inductor and basic passives. The low (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Modelo de simulación

TPSM843620 SIMPLIS Model

SLUM878.ZIP (902 KB) - SIMPLIS Model
Descargar
Herramienta de cálculo

CALC-TOOL-TPSM843X20 — CALC-TOOL-TPSM843X20

TPSM843320 TPSM843620 TPSM843820 Calculator Tool
Productos y hardware compatibles

Productos y hardware compatibles

Productos
Módulos de alimentación (inductor integrado)
TPSM843320 — Módulo de alimentación reductor SWIFT™ síncrono de 3 A con entrada de 4 V a 18 V y modo de corriente TPSM843320E — Módulo de alimentación reductor SWIFT™ síncrono de 3A, ‌entrada de 4 V a 1 TPSM843620 — 4-V to 18-V input, advanced current mode, 6-A synchronous SWIFT™ step-down power module TPSM843620E — Módulo de alimentación reductora SWIFT™ síncrono de 6 A, ‌entrada de 4&nbs TPSM843820 — Módulo de alimentación reductor SWIFT™ síncrono de 8 A con entrada de 4 V a 18 V, modo de corriente TPSM843820E — Módulo de alimentación reductora SWIFT™ síncrono de 8A, ‌entrada de 4 V a
Descargar
Paquete Pasadores Descargar
USIP (SIT) 15 Ver opciones
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos