TSER9615

ACTIVO

Serializador MIPI® CSI-2 V³Link™ de 7,55 Gbps para sensores de alta velocidad

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TSER9615 V3LinkTM7.55 GbpsSerializer MIPI CSI-2 Interface for High-Speed, High-Resolution Cameras, RADAR, and Other Sensors datasheet (Rev. A) (Inglés) PDF | HTML

TSER9615

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Applications

Camera SerDes

Color depth (bpp)

24

Function

Serializer

Input compatibility

MIPI CSI-2

Output compatibility

V3Link

Features

Bidirectional, CRC, Coax or STP, Flexible GPIOs, I2C Config, Pattern Generation, Temperature sensing

Signal conditioning

DC Balance

EMI reduction

LVDS

Diagnostics

BIST

Rating

Catalog

Operating temperature range (°C)

-20 to 85

Applications

Camera SerDes

Color depth (bpp)

24

Function

Serializer

Input compatibility

MIPI CSI-2

Output compatibility

V3Link

Features

Bidirectional, CRC, Coax or STP, Flexible GPIOs, I2C Config, Pattern Generation, Temperature sensing

Signal conditioning

DC Balance

EMI reduction

LVDS

Diagnostics

BIST

Rating

Catalog

Operating temperature range (°C)

-20 to 85

VQFN (RHB)

32

25 mm² (5 mm × 5 mm)

7.55 Gbps (6 Gbps video payload) serializer supports high-speed sensors including 8 MP+ imagers
Supports 3 data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps.
Power-over-Coax (PoC) compatible transceiver
Single MIPI D-PHY port with 4 lanes
- Compliant to MIPI D-PHY v2.1
- 1 Clock lane and 1, 2 or 4 configurable data lanes
- Up to 1.5 Gbps/lane
- Supports polarity pin inversion (p/n)
- Up to 16 virtual channels
Single port MIPI CSI-2 receiver
- Compliant to MIPI CSI-2 v2.1
- Supports multiple data types and multi-exposure
Advanced data protection and diagnostics including CRC data protection, sensor data integrity check, I 2C write protection, voltage and temperature measurement, programmable alarm and line fault detection
Flexible programmable output clock generator
Supports single-ended coaxial cable and shielded-twisted-pair (STP) cable
Ultra-low latency bidirectional I2C and GPIO control channel enables ISP control from ECU
Single 1.8 V power supply
Compatible with all V 3Link Vision / Enhanced Vision deserializers
Pin-to-pin compatible with the TSER953 serializer

7.55 Gbps (6 Gbps video payload) serializer supports high-speed sensors including 8 MP+ imagers
Supports 3 data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps.
Power-over-Coax (PoC) compatible transceiver
Single MIPI D-PHY port with 4 lanes
- Compliant to MIPI D-PHY v2.1
- 1 Clock lane and 1, 2 or 4 configurable data lanes
- Up to 1.5 Gbps/lane
- Supports polarity pin inversion (p/n)
- Up to 16 virtual channels
Single port MIPI CSI-2 receiver
- Compliant to MIPI CSI-2 v2.1
- Supports multiple data types and multi-exposure
Advanced data protection and diagnostics including CRC data protection, sensor data integrity check, I 2C write protection, voltage and temperature measurement, programmable alarm and line fault detection
Flexible programmable output clock generator
Supports single-ended coaxial cable and shielded-twisted-pair (STP) cable
Ultra-low latency bidirectional I2C and GPIO control channel enables ISP control from ECU
Single 1.8 V power supply
Compatible with all V 3Link Vision / Enhanced Vision deserializers
Pin-to-pin compatible with the TSER953 serializer

The TSER9615 serializer is part of TI’s V 3Link Enhanced Vision family and is designed to support ultra-high-speed data sensors including 8MP+ Imagers, satellite RADAR, LIDAR, and time-of-flight (ToF) sensors. The serializer delivers an 7.55 Gbps forward channel and an ultra-low latency, 47.1875 Mbps bidirectional control channel and supports power over a single coax (PoC) or STP cable. When the TSER9615 is used in Enhanced Vision mode, it provides the possibility to select between three data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps. The TSER9615 features advanced data protection and diagnostic features. Together with a companion deserializer, the TSER9615 delivers precise multi-camera sensor clock and sensor synchronization.

The TSER9615 is qualified with a wide temperature range of –20°C to 85°C. The serializer comes in a small 5 mm × 5 mm VQFN package for space-constrained sensor applications.

The TSER9615 serializer is part of TI’s V 3Link Enhanced Vision family and is designed to support ultra-high-speed data sensors including 8MP+ Imagers, satellite RADAR, LIDAR, and time-of-flight (ToF) sensors. The serializer delivers an 7.55 Gbps forward channel and an ultra-low latency, 47.1875 Mbps bidirectional control channel and supports power over a single coax (PoC) or STP cable. When the TSER9615 is used in Enhanced Vision mode, it provides the possibility to select between three data rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps. The TSER9615 features advanced data protection and diagnostic features. Together with a companion deserializer, the TSER9615 delivers precise multi-camera sensor clock and sensor synchronization.

The TSER9615 is qualified with a wide temperature range of –20°C to 85°C. The serializer comes in a small 5 mm × 5 mm VQFN package for space-constrained sensor applications.

filter

Buscar otro/a Serializadores-deserializadores V3Link

Descargar Ver vídeo con transcripción Video

Solicitar más información

Están disponibles la hoja de datos completa y recursos adicionales. Solicitar ahora

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 1

Documentación principal	Tipo	Título	Opciones de formato	Descargar la versión más reciente en inglés	Fecha
*	Hoja de datos	TSER9615 V3LinkTM7.55 GbpsSerializer MIPI CSI-2 Interface for High-Speed, High-Resolution Cameras, RADAR, and Other Sensors datasheet (Rev. A)	PDF \| HTML		16/11/2023

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DS90UB971-Q1EVM — Módulo de evaluación DS90UB971-Q1

El módulo de evaluación (EVM) DS90UB971-Q1 es un diseño de placa funcional para evaluar el serializador FPD-Link IV DS90UB971-Q1. El serializador DS90UB971-Q1 representa la primera generación de serializadores FPD-Link IV y está diseñado para admitir sensores de velocidad ultrarrápida, incluidos (...)

Productos y hardware compatibles

Solicitar

Software de aplicación y estructura

ALP — Analog LaunchPad Framework Utility

To get started with Analog LaunchPad (ALP) software: Download and install the ALP Framework Utility. Add new device profiles and example scripts with the ALP-PROFILE-UPDATE tool.

Productos y hardware compatibles

Opciones de descarga

Soporte de software

ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software

ALP Profile Update contains latest fixes and updates to ALP profiles. If you are installing for the first time please install ALP Profile Update after installing ALP Framework.

Productos y hardware compatibles

Opciones de descarga

Modelo de simulación