Información de empaque
| Encapsulado | Pines HTQFP (PVP) | 64 |
| Rango de temperatura de funcionamiento (℃) 0 to 70 |
| Cant. de paquetes | Transportador 250 | JEDEC TRAY (10+1) |
Características para TUSB9260
- Universal Serial Bus (USB)
- SuperSpeed USB 3.0 Compliant - TID 340000007
- Integrated Transceiver Supports SS/HS/FS Signaling
- Best in Class Adaptive Equalizer
- Allows for Greater Jitter Tolerance in the Receiver
- USB Class Support
- USB Attached SCSI Protocol (UASP)
- USB Mass Storage Class Bulk-Only Transport (BOT)
- Support for Error Conditions Per the 13 Cases (Defined in the BOT Specification)
- USB Bootability Support
- USB Human Interface Device (HID)
- Supports Firmware Update Via USB, Using a TI Provided Application
- SuperSpeed USB 3.0 Compliant - TID 340000007
- SATA Interface
- Serial ATA Specification Revision 2.6
- gen1i, gen1m, gen2i, and gen2m
- Support for Mass-Storage Devices Compatible With the ATA/ATAPI-8 Specification
- Serial ATA Specification Revision 2.6
- Integrated ARM Cortex M3 Core
- Customizable Application Code Loaded From EEPROM Via SPI Interface
- Two Additional SPI Port Chip Selects for Peripheral Connection
- Up to 12 GPIOs for End-User Configuration
- 2 GPIOs Have PWM Functionality for LED Blink Speed Control
- Serial Communications Interface for Debug (UART)
- General Features
- Can Operate from Either a Single Low Cost Crystal or Clock Oscillator
- Supports 40 MHz
- A JTAG Interface is Used for IEEE1149.1 and IEEE1149.6 Boundary Scan
- Available in a Fully RoHS Compliant Package
- Can Operate from Either a Single Low Cost Crystal or Clock Oscillator
- Target Applications
- External HDD/SSD
- External DVD
- External CD
- HDD-Based Portable Media Player
Descripción de TUSB9260
The TUSB9260 is an ARM cortex M3 microcontroller based USB 3.0 to serial ATA bridge. It provides the necessary hardware and firmware to implement a USB attached SCSI protocol (UASP) compliant mass storage device suitable for bridging hard disk drives (HDD), solid state disk drives (SSD), optical drives and other compatible SATA 1.5-Gbps or SATA 3.0-Gbps devices to a USB 3.0 bus. In addition to UASP support, the firmware implements the mass storage class bulk-only transport (BOT), and USB human interface device (HID) interfaces.