Inicio Administración de potencia Reguladores de conmutación CA/CC Controladores de CA/CC

UCC3813-4

ACTIVO

PWM de 1 MHz con modo de corriente BiCMOS de baja potencia y bajo consumo, UVLO de 12.5 V/8.3 V, cic

Detalles del producto

Topology Boost, Flyback Control mode Current Features Adjustable switching frequency, Current limiting, Dead time control, Error amplifier, Fixed frequency, Leading edge blanking, Multi-topology, Soft start Duty cycle (max) (%) 50
Topology Boost, Flyback Control mode Current Features Adjustable switching frequency, Current limiting, Dead time control, Error amplifier, Fixed frequency, Leading edge blanking, Multi-topology, Soft start Duty cycle (max) (%) 50
TSSOP (PW) 8 19.2 mm² (3 mm × 6.4 mm) SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm)
  • 100µA typical starting supply current
  • 500µA typical operating supply current
  • Operation to 1MHz
  • Internal soft start
  • Internal fault soft start
  • Internal leading-edge blanking of the current-sense signal
  • 1A totem-pole output
  • 70ns typical response from current-sense to gate-drive output
  • 1.5% tolerance voltage reference
  • Same pinout as the UCC3802 device, UC3842 device, and UC3842A device families
  • 100µA typical starting supply current
  • 500µA typical operating supply current
  • Operation to 1MHz
  • Internal soft start
  • Internal fault soft start
  • Internal leading-edge blanking of the current-sense signal
  • 1A totem-pole output
  • 70ns typical response from current-sense to gate-drive output
  • 1.5% tolerance voltage reference
  • Same pinout as the UCC3802 device, UC3842 device, and UC3842A device families

The UCC3813-x device family of high-speed, low-power integrated circuits contains all of the control and drive components required for off-line and DC-to-DC fixed-frequency current-mode switching power supplies with minimal parts count.

These devices have the same pin configuration as the UC384x device family, and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.

The UCC3813-x device family offers a variety of package options, temperature-range options, choice of maximum duty cycle, and choice of critical voltage levels. Devices with lower reference voltage such as the UCC3813-3 and UCC3813-5 fit best into battery operated systems, while the higher reference and the higher UVLO hysteresis of the UCC3813-2 device and UCC3813-4 device make these ideal choices for use in off-line power supplies.

The UCC2813-x device series is specified for operation from –40°C to 85°C and the UCC3813-x device series is specified for operation from 0°C to 70°C.

The UCC3813-x device family of high-speed, low-power integrated circuits contains all of the control and drive components required for off-line and DC-to-DC fixed-frequency current-mode switching power supplies with minimal parts count.

These devices have the same pin configuration as the UC384x device family, and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.

The UCC3813-x device family offers a variety of package options, temperature-range options, choice of maximum duty cycle, and choice of critical voltage levels. Devices with lower reference voltage such as the UCC3813-3 and UCC3813-5 fit best into battery operated systems, while the higher reference and the higher UVLO hysteresis of the UCC3813-2 device and UCC3813-4 device make these ideal choices for use in off-line power supplies.

The UCC2813-x device series is specified for operation from –40°C to 85°C and the UCC3813-x device series is specified for operation from 0°C to 70°C.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 11
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos UCCx813-x Low-Power Economy BiCMOS Current-Mode PWM datasheet (Rev. G) PDF | HTML 25/04/2025
Nota sobre la aplicación Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps (Rev. A) PDF | HTML 11/06/2021
Nota sobre la aplicación Understanding Inverting Buck-Boost Power Stages in Switch Mode Power Supplies (Rev. B) 12/03/2019
Guía de selección Power Management Guide 2018 (Rev. R) 25/06/2018
Guía del usuario UCC3813 Dual Output Boost Converter 9/10/2003
Nota sobre la aplicación UCC38C42 Family of High-Speed BiCMOS Current-Mode PWM Controllers 7/02/2002
Nota sobre la aplicación Differences Between the UCC3813 and the UCC3800 PWM Families 2/06/2000
Nota sobre la aplicación U-133A UCC3800/1/2/3/4/5 BiCMOS Current Mode Control IC's 5/09/1999
Nota sobre la aplicación DN-62 Switching Power Supply Topology Voltage Mode vs. Current Mode 5/09/1999
Nota sobre la aplicación DN-42A Design Considerations for Transitioning from UC3842 to the New UCC3802 5/09/1999
Nota sobre la aplicación U-111, Practical Considerations in Current Mode Power Supplies 5/09/1999

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación

UCCX804 & UCCx813-4 TINA-TI Startup Reference Design

SLUM226.TSC (666 KB) - Diseño de referencia TINA-TI
Productos y hardware compatibles
Modelo de simulación

UCCX804 & UCCx813-4 TINA-TI Steady State Reference Design

SLUM227.TSC (667 KB) - Diseño de referencia TINA-TI
Productos y hardware compatibles
Modelo de simulación

UCCX804 & UCCx813-4 TINA-TI Transient Spice Model

SLUM228.ZIP (28 KB) - Modelo TINA-TI Spice
Productos y hardware compatibles
Modelo de simulación

UCCx804 & UCCx813-4 Unencrypted PSpice Transient Model

SLUM515.ZIP (6 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

UCCx804, UCCx813-4 Families PSpice Transient Model (Rev. B)

SLUM082 (84 KB) - Modelo PSpice
Productos y hardware compatibles
Diseño de referencia

PMP20306 — Diseño de referencia de una fuente de alimentación de tres salidas de 200 V a 400 V (nominal) con de

Este diseño de referencia es un diseño compacto y térmicamente eficiente destinado a utilizarse como suministro de polarización para convertidores de medio puente. Se utiliza un retorno DCM con controlador UCC3813-4 para generar dos suministros aislados de 12 V para los circuitos de accionamiento (...)
Productos y hardware compatibles
Diseño de referencia

PMP22220 — Diseño de referencia PFC sin puente de conmutación de CA de 1500 W

Este diseño de referencia es un interruptor de CA sin puente de corrección del factor de potencia (PFC) que funciona en modo de conducción continua (CCM). Acepta una tensión de entrada de CA universal (de 90 VCA a 264 VCA), proporciona 390 V, una salida de línea baja de 1000 W y una salida de (...)
Productos y hardware compatibles
Diseño de referencia

PMP23476 — Diseño de referencia de alimentación de polarización auxiliar compacta de triple salida de 6 W

Este diseño de referencia muestra un retorno regulado del lado primario con dos salidas de 12 V no aisladas y una salida de 12 V aislada. El tamaño total de la alimentación de polarización es de 24.5 mm x 32 mm x 17 mm.
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TSSOP (PW) 8 Ultra Librarian
SOIC (D) 8 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos