DP83848-HT
- Low-Power 3.3-V, 0.18-µm CMOS Technology
- Low Power Consumption <270 mW Typical
- 3.3-V MAC Interface
- Auto-MDIX for 10/100 Mb/s
- Energy Detection Mode
- 25-MHz Clock Out
- SNI Interface (Configurable)
- RMII Rev. 1.2 Interface (Configurable)
- MII Serial Management Interface (MDC and
MDIO) - IEEE 802.3u MII
- IEEE 802.3u Auto-Negotiation and Parallel
Detection - IEEE 802.3u ENDEC, 10BASE-T Transceivers
and Filters - IEEE 802.3u PCS, 100BASE-TX Transceivers
and Filters - IEEE 1149.1 JTAG
- Integrated ANSI X3.263 Compliant TP-PMD
Physical Sublayer With Adaptive Equalization and
Baseline Wander Compensation - Error-Free Operation up to 150 Meters
- Programmable LED Support Link, 10 /100 Mb/s
Mode, Activity, and Collision Detect - Single Register Access for Complete PHY Status
- 10/100 Mb/s Packet BIST (Built-in Self Test)
- Supports Defense, Aerospace, and Medical
Applications- Controlled Baseline
- One Assembly and Test Site
- One Fabrication Site
- Extended Temperature Range (–55°C to
150°C) - Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability
The number of applications requiring ethernet connectivity continues to increase. Along with this increased market demand is a change in application requirements. The DP83848 was designed to allow ethernet connectivity in the harshest environments. This device is ideally suited for harsh environments for example wireless remote base stations, automotive, transportation and industrial control applications.
The DP83848 is a highly-reliable, feature-rich robust device which includes enhanced ESD protection, MII and RMII for maximum flexibility in MPU selection.
The DP83848 features integrated sublayers to support both 10BASE-T and 100BASE-TX Ethernet protocols, which ensures compatibility and interoperability with all other standards based Ethernet solutions.
お客様が関心を持ちそうな類似品
比較対象デバイスと同等の機能で、ピン配置が異なる製品。
技術資料
| 上位の文書 | タイプ | タイトル | フォーマットオプション | 最新の英語版をダウンロード | 日付 | |
|---|---|---|---|---|---|---|
| * | データシート | DP83848-HT PHYTER™ Military Temperature Single Port 10/100 MB/S Ethernet Physical Layer Transceiver データシート | PDF | HTML | 2015/02/12 | ||
| アプリケーション・ノート | How to Pass IEEE Ethernet Compliance Tests | PDF | HTML | 2021/09/20 | |||
| アプリケーション・ノート | Selection and specification of crystals for Texas Instruments ethernet physical | 2019/02/06 | ||||
| 技術記事 | How to select the right industrial Ethernet standard: EtherCAT | PDF | HTML | 2015/09/17 | |||
| 技術記事 | How to select the right industrial Ethernet standard: Sercos III | PDF | HTML | 2015/07/23 | |||
| ユーザー・ガイド | AN-1521 POEPHYTEREV-I / -E User Guide (Rev. C) | 2013/04/26 | ||||
| アプリケーション・ノート | AN-1511 Cable Discharge Event (Rev. A) | 2013/04/26 | ||||
| アプリケーション・ノート | AN-1519 DP83848 PHYTER® Transformerless Ethernet Operation (Rev. A) | 2013/04/26 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
DP83848SW-LINUX — DP83848 向け Linux ドライバ
The Linux driver supports the DP83848 Ethernet physical layer (PHY) device. The Linux driver supports communication through MII/MDIO and registers with the PHY framework of the Linux kernel.
Linux mainline status
Available in Linux mainline: Yes
Available through git.ti.com: N/A
Supported Devices:
- (...)
ETHERNET-SW — イーサネット PHY のドライバとツール
TI (テキサス・インスツルメンツ) のイーサネット物理層 (PHY) トランシーバ向けドライバは、シリアル管理インターフェイス (MDC/MDIO) 経由の通信をサポートしており、PHY レジスタの構成と読み取りを行います。Linux と RTOS の各ドライバは、TI の github で見つかります。
USB-2-MDIO — USB-2-MDIO Tool v1.0
TI のイーサネット PHY を活用する開発ユーザーは、USB-2-MDIO (USB から MDIO への変換) ソフトウェア ツールを使用すると、MDIO のステータス レジスタとデバイスの制御レジスタにアクセスできます。 USB-2-MDIO ツールには、TI の MSP430™ マイコン向けの LaunchPad™ 開発キットが付属しており、軽量 GUI とのインターフェイスを確立できます。 この LaunchPad 開発キットは 1 個の MDIO バス コントローラを実装します。そのコントローラは、バスに接続済みの PHY 上にあるレジスタを操作することができます。
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| DIESALE (KGD) | — | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。