LMH0395
- ST 424, ST 292, ST 344, ST 259, and DVB-ASI Compliant(1)
- Equalized Cable Lengths (Belden 1694A): 200 Meters at 2.97 Gbps, 220 Meters at 1.485 Gbps, and 400 Meters at 270 Mbps
- Ultra-low Power Consumption: 140 mW (Dual Outputs), 115 mW (Single Output)
- Dual Differential Outputs; Second Output Can Be Independently Powered Down
- Power-Save Mode With Auto Sleep Control (17-mW Typical Power Consumption in Power-Save Mode)
- Designed for Crosstalk Immunity
- Output De-Emphasis to Compensate for FR4 Board Trace Losses
- Digital and Analog Programmable MUTEREF Threshold
- Optional SPI Register Access and Pin Mode Operation
- Input Data Rates: 125 Mbps to 2.97 Gbps
- Internally Terminated 100-Ω LVDS Outputs With Programmable Output Common-Mode Voltage and Swing
- Programmable Launch Amplitude Optimization
- Cable Length Indicator
- Single 2.5-V Supply Operation
- 24-Pin WQFN Package
- Industrial Temperature Range: −40°C to +85°C
The LMH0395 3-Gbps HD/SD SDI Dual Output Low Power Extended Reach Adaptive Cable Equalizer is designed to equalize data transmitted over cable (or any media with similar dispersive loss characteristics). The equalizer operates over a wide range of data rates from 125 Mbps to 2.97 Gbps and supports ST 424, ST 292, ST 344, ST 259, and DVB-ASI standards.
The LMH0395 device provides extended cable reach with improved immunity to crosstalk and ultra low power consumption. The equalizer includes active sensing circuitry that ensures robust performance and enhanced immunity to variations in the input signal launch amplitude. The LMH0395 offers power management to further reduce power consumption when no input signal is present.
The LMH0395 has two differential serial data outputs, increasing flexibility and eliminating the need for a fanout buffer on the output in many applications. The outputs may be independently enabled and controlled. The output drivers offer programmable de-emphasis for up to 40 inches of FR4 trace losses. The LMH0395 supports two modes of operation. In pin mode, the LMH0395 operates with control pins to set its operating state. In SPI mode, an optional SPI serial interface can be used to access and configure multiple LMH0395 devices in a daisy-chain configuration.
技術資料
| 上位の文書 | タイプ | タイトル | フォーマットオプション | 最新の英語版をダウンロード | 日付 | |
|---|---|---|---|---|---|---|
| * | データシート | LMH0395 3G HD/SD SDI Dual Output Low Power Extended Reach Adaptive Cable Equalizer データシート (Rev. N) | PDF | HTML | 2017/01/03 | ||
| アプリケーション・ノート | 3G-SDI Cable Equalizer Compatibility Guide – TI / MACOM | 2017/09/13 | ||||
| アプリケーション・ノート | 3G-SDI Cable Equalizer Compatibility Guide – TI / Semtech | 2017/09/13 | ||||
| セレクション・ガイド | Broadcast and Professional Video Interface Solutions (Rev. E) | PDF | HTML | 2017/04/05 | |||
| アプリケーション・ノート | AN-2145 Power Considerations for SDI Products (Rev. B) | 2013/04/26 | ||||
| アプリケーション・ノート | AN-2146 Power Design for SDI and Other Noise-Sensitive Devices (Rev. A) | 2013/04/26 | ||||
| アプリケーション・ノート | AN-1943 Understanding Serial Digital Video Bit Rates (Rev. A) | 2013/04/26 | ||||
| アプリケーション・ノート | High-Speed Board Layout Challenges in FPGA/SDI Sub-Systems | 2009/11/12 | ||||
| 設計ガイド | Broadcast Video Owner's Manual | 2006/11/17 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
TIDA-00253 — シリアル デジタル インターフェイス向け低消費電力 1:4 分配アンプのリファレンス デザイン
TIDA-00253 リファレンス デザインは、機能的には 1:4 SDI 分配アンプであり、ホスト コンピュータとの接続を可能にする USB インターフェイスを備えています。また、グラフィカル ユーザー インターフェイス (GUI) ソフトウェアにより、基板上のデバイス設定を任意に変更できるほか、SDI ビデオのアイ ダイアグラム監視も可能です。マルチプレクシング機能およびアイ ダイアグラム測定は、一般的な映像制作環境では導入が難しいビデオ アナライザや高帯域幅オシロスコープを使用せずに実施できます。
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| WQFN (RTW) | 24 | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。