TPS61291
- Input Voltage Range 0.9V to 5V
- Startup Voltage 1.5V at 20mA Load
- Pin Selectable Output Voltages:
3.3V, 3V, 2.5V - 15nA typical Quiescent Current in
Bypass Mode - 5.7µA typical Quiescent Current in
Boost Mode - Bypass Switch from VIN to VOUT
- IOUT > 200mA at 3.3V VOUT,
VIN = 1.8V - Internal Feedback Divider Disconnect
(Bypass Mode) - Controlled Bypass Transition Prevents
Reverse Current into Battery - Power-Save Mode at Light Loads
- Overtemperature Protection
- Redundant Overvoltage Protection
- Small 2mm × 2mm SON 6-pin package
The TPS61291 is a boost converter with pin selectable output voltages and an integrated bypass mode. In bypass operation, the device provides a direct path from the input to the system and allows a low power micro controller (MCU) such as the MSP430 to operate directly from a single 3V Li-MnO2 battery or dual alkaline battery cells.
In bypass mode the integrated feedback divider network for boost mode operation is disconnected from the output and the quiescent current consumption drops down to only 15nA (typical).
In boost mode the device provides a minimum output current of 200mA at 3.3V VOUT from 1.8V VIN. The boost mode is used for system components which require a regulated supply voltage and cannot directly operate from the input source. The boost converter is based on a current-mode controller using synchronous rectification to obtain maximum efficiency and consumes typically 5.7µA from the output. During startup of the boost converter, the VSEL pin is read out and the integrated feedback network sets the output voltage to 2.5V, 3V or 3.3V.
Bypass mode or boost mode operation is controlled by the system via the EN/BYP pin.
The device integrates an enhanced bypass mode control to prevent charge, stored in the output capacitor during boost mode operation, from flowing back to the input and charging the battery.
The device is packaged in a small 6-pin SON package (DRV) measuring 2.0mm × 2.0mm × 0.75mm.
お客様が関心を持ちそうな類似品
比較対象デバイスと同等の機能で、ピン配置が異なる製品。
技術資料
| 上位の文書 | タイプ | タイトル | フォーマットオプション | 最新の英語版をダウンロード | 日付 | |
|---|---|---|---|---|---|---|
| * | データシート | TPS61291 Low Iq Boost Converter with Bypass Operation データシート (Rev. A) | PDF | HTML | 2014/09/23 | ||
| アプリケーション・ノート | QFN and SON PCB Attachment (Rev. C) | PDF | HTML | 2023/12/06 | |||
| アプリケーション・ノート | 昇圧コンバータの電力段に関する基本的な計算 (Rev. D 翻訳版) | PDF | HTML | 英語版 (Rev.D) | PDF | HTML | 2022/12/01 | |
| アプリケーション・ノート | Performing Accurate PFM Mode Efficiency Measurements (Rev. A) | 2018/12/11 | ||||
| アプリケーション・ノート | Extending the Soft Start Time Without a Soft Start Pin (Rev. B) | 2017/06/15 | ||||
| アプリケーション・ノート | Calculating and Measuring the No Load Input Current of the Boost Converter | 2016/09/23 | ||||
| 技術記事 | How to use boost converters in wireless sensor nodes | PDF | HTML | 2015/10/06 | |||
| アナログ デザイン ジャーナル | Accurately measuring efficiency of ultralow-IQ devices | 2014/01/22 | ||||
| アナログ デザイン ジャーナル | IQ: What it is, what it isn’t, and how to use it | 2011/06/17 | ||||
| アプリケーション・ノート | Minimizing Ringing at the Switch Node of a Boost Converter | 2006/09/15 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
TPS61291EVM-569 — 低 IQ 昇圧コンバータ、バイパス モード評価基板付き
TPS61291EVM-569 を使用すると、バイパスモードデバイスを搭載した低 IQ 昇圧コンバータである TPS61291 を容易に評価できます。 このデバイスは、ユーザーが選択可能な 2.5V、3V、または 3.3V の出力電圧を出力します。 利用可能な出力電流は入力電圧と出力電圧に依存しますが、ほとんどのアプリケーションでは一般に 200mA 付近です。
Unencrypted TPS61291 PSpice Transient Model Package (Rev. A)
TIDA-00484 — 10 年以上のコイン型電池寿命を実現するSub-1GHz スター ネットワーク用の湿度および温度センサ ノード
このリファレンス デザインは、ナノパワー システム タイマ、昇圧コンバータ、SimpleLink™ 超低消費電力 Sub-1GHz ワイヤレス マイコン (MCU) プラットフォーム、および湿度センシング技術を使用し、センサ エンドノードをデューティサイクル動作させる超低消費電力の方法を実証します。これにより、非常に長いバッテリ寿命を実現できます。このデザインは、システム設計の技法、詳細なテスト結果、迅速な設計開始を可能にする情報も公開しています。
TIDA-01469 — ワイヤレス振動センサを使用し、予防保守を可能にするモータ監視のリファレンス デザイン
TIDA-01477 — Sub-1GHz とセンサ / クラウド間ネットワークを可能にする温湿度センサ ノードのリファレンス デザイン
TIDM-ULTRASONIC-FLOW-TDC — 時間 / デジタル変換を使用する超音波水流量測定の設計
TIDM-ULTRASONIC-FLOW-TDC は、時間 / デジタル コンバータと超低消費電力マイコンを使用して構築された LCD を搭載した、超音波流量計 (水道、ガス、または暖房メーター) のリファレンス デザインです。ソリューションには、最適化されたリーケージ検出機能、低消費電力、小型フォーム ファクタが含まれており、水道、暖房、ガスの各メーター アプリケーションで重要な要件となります。このデザインには、システム電源用の高効率 DC/DC コンバータも搭載されています。
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| WSON (DRV) | 6 | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。