ホーム パワー マネージメント DC/DC スイッチング レギュレータ DC/DC コンバータ

TPS62122

アクティブ

15V、75mA、効率 96%、降圧コンバータ

この製品には新バージョンがあります

open-in-new 代替品と比較
比較対象デバイスと類似の機能。
TPS629203 アクティブ SOT-583 パッケージ封止、3V ~ 17V、0.3A、低静止電流 (IQ)、同期整流降圧コンバータ Improved efficiency, smaller size and lower IQ.

製品詳細

Rating Catalog Topology Buck Iout (max) (A) 0.075 Vin (max) (V) 15 Vin (min) (V) 2 Vout (max) (V) 5.5 Vout (min) (V) 1.2 Features Enable, Light-load efficiency, Synchronous rectification Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.000011 Duty cycle (max) (%) 100
Rating Catalog Topology Buck Iout (max) (A) 0.075 Vin (max) (V) 15 Vin (min) (V) 2 Vout (max) (V) 5.5 Vout (min) (V) 1.2 Features Enable, Light-load efficiency, Synchronous rectification Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.000011 Duty cycle (max) (%) 100
WSON (DRV) 6 4 mm² (2 mm × 2 mm)
  • Wide Input Voltage Range: 2 V to 15 V
  • Up to 96% Efficiency
  • Power Save Mode With 11-µA Quiescent Current
  • Output Current 75 mA
  • Output Voltage Range: 1.2 V to 5.5 V
  • Up to 800-kHz Switch Frequency
  • Synchronous Converter, No External Rectifier
  • Low Output Ripple Voltage
  • 100% Duty Cycle for Lowest Dropout
  • Small SOT 8-Pin (TPS62120) and 2-mm × 2-mm
    DFN 6-Pin (TPS62122) Package
  • Internal Soft Start
  • Power Good Open Drain Output (TPS62120)
  • Open-Drain Output for Output Discharge
    (TPS62120)
  • 2.5-V Rising and 1.85-V Falling UVLO Thresholds
  • Wide Input Voltage Range: 2 V to 15 V
  • Up to 96% Efficiency
  • Power Save Mode With 11-µA Quiescent Current
  • Output Current 75 mA
  • Output Voltage Range: 1.2 V to 5.5 V
  • Up to 800-kHz Switch Frequency
  • Synchronous Converter, No External Rectifier
  • Low Output Ripple Voltage
  • 100% Duty Cycle for Lowest Dropout
  • Small SOT 8-Pin (TPS62120) and 2-mm × 2-mm
    DFN 6-Pin (TPS62122) Package
  • Internal Soft Start
  • Power Good Open Drain Output (TPS62120)
  • Open-Drain Output for Output Discharge
    (TPS62120)
  • 2.5-V Rising and 1.85-V Falling UVLO Thresholds

The TPS6212x device is a highly efficient synchronous step-down DC-DC converter optimized for low-power applications. The device supports up to 75-mA output current and allows the use of tiny external inductors and capacitors.

The wide operating input voltage range of 2 V to 15 V supports energy harvesting, battery powered and as well 9-V or 12-V line powered applications.

With its advanced hysteretic control scheme, the converter provides power save mode operation. At light loads the converter operates in pulse frequency modulation (PFM) mode and transitions automatically in pulse width modulation (PWM) mode at higher load currents. The power save mode maintains high efficiency over the entire load current range. The hysteretic control scheme is optimized for low output ripple voltage in PFM mode in order to reduce output noise to a minimum. The device consumes only 10-µA quiescent current from VIN in PFM mode operation.

In shutdown mode, the device is turned off.

An open-drain power good output is available in the TPS62120 and indicates once the output voltage is in regulation.

The TPS62120 has an additional SGND pin which is connected to GND during shutdown mode. This output can be used to discharge the output capacitor.

The TPS6212x operates over an free air temperature range of –40°C to 85°C. The TPS62120 is available in a small 8-pin SOT-23 package and the TPS62122 in a 2 mm × 2 mm 6-pin DFN package.

The TPS6212x device is a highly efficient synchronous step-down DC-DC converter optimized for low-power applications. The device supports up to 75-mA output current and allows the use of tiny external inductors and capacitors.

The wide operating input voltage range of 2 V to 15 V supports energy harvesting, battery powered and as well 9-V or 12-V line powered applications.

With its advanced hysteretic control scheme, the converter provides power save mode operation. At light loads the converter operates in pulse frequency modulation (PFM) mode and transitions automatically in pulse width modulation (PWM) mode at higher load currents. The power save mode maintains high efficiency over the entire load current range. The hysteretic control scheme is optimized for low output ripple voltage in PFM mode in order to reduce output noise to a minimum. The device consumes only 10-µA quiescent current from VIN in PFM mode operation.

In shutdown mode, the device is turned off.

An open-drain power good output is available in the TPS62120 and indicates once the output voltage is in regulation.

The TPS62120 has an additional SGND pin which is connected to GND during shutdown mode. This output can be used to discharge the output capacitor.

The TPS6212x operates over an free air temperature range of –40°C to 85°C. The TPS62120 is available in a small 8-pin SOT-23 package and the TPS62122 in a 2 mm × 2 mm 6-pin DFN package.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品。
TPS62120 アクティブ DCS 制御付き、15V、75mA、効率性 96%、降圧コンバータ Same product with PG pin in a different package.

技術資料

結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
20 をすべて表示
上位の文書 タイプ タイトル フォーマットオプション 最新の英語版をダウンロード 日付
* データシート TPS6212x 15-V, 75-mA Highly Efficient Buck Converter データシート (Rev. A) PDF | HTML 2015/07/31
アプリケーション・ノート QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023/12/06
アプリケーション・ノート Using the TPS62120 in an Inverting Buck-Boost Topology (Rev. C) PDF | HTML 2022/11/29
アプリケーション・ノート Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) PDF | HTML 2022/05/23
アナログ デザイン ジャーナル Methods of output-voltage adjustment for DC/DC converters 2019/06/14
アプリケーション・ノート Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018/12/11
アナログ デザイン ジャーナル Understanding 100% mode in low-power DC/DC converters 2018/06/22
アナログ デザイン ジャーナル Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017/10/24
アプリケーション・ノート Extending the Soft Start Time Without a Soft Start Pin (Rev. B) 2017/06/15
技術記事 Cutting the last wire to unleash Industry 4.0 PDF | HTML 2016/10/27
アナログ デザイン ジャーナル Testing tips for applying external power to supply outputs without an input voltage 2016/10/24
アナログ デザイン ジャーナル Understanding frequency variation in the DCS-Control(TM) topology 2015/10/30
アプリケーション・ノート Basic Calculation of a Buck Converter's Power Stage (Rev. B) PDF | HTML 2015/08/17
アナログ デザイン ジャーナル Five steps to a great PCB layout for a step-down converter 2015/01/29
アナログ デザイン ジャーナル High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions 2013/07/25
アプリケーション・ノート How to Measure the Control Loop of DCS-Control Devices (Rev. A) 2012/08/09
アナログ デザイン ジャーナル Design considerations for a resistive feedback divider in a DC/DC converter 2012/04/26
アプリケーション・ノート Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 2012/01/13
アプリケーション・ノート Powering the MSP430 from a High Voltage Input using the TPS62122 (Rev. C) 2012/01/12
アナログ デザイン ジャーナル IQ: What it is, what it isn’t, and how to use it 2011/06/17

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TPS62122EVM-586 — TPS62122 評価モジュール

The TPS62122EVM-586 is a fully assembled and tested platform for evaluating the operation and performance of the TPS62122 converter. The TPS62122EVM-586 has an input voltage range from 2.0 V up to 15 V, and the output voltage is adjustable with an external feedback divider network in the range of (...)

ユーザー ガイド: PDF
サポート対象の製品とハードウェア
在庫あり
制限:
??asset.out-of-stock-ti_ja_JP??
入手不可
シミュレーション・モデル

TPS62122 PSpice Unencrypted Transient Model (Rev. B)

SLIM217B.ZIP (218 KB) - PSpice モデル
サポート対象の製品とハードウェア
シミュレーション・モデル

TPS62122 TINA-TI Transient Reference Design

SLVM314.TSC (862 KB) - TINA-TI リファレンス・デザイン
サポート対象の製品とハードウェア
シミュレーション・モデル

TPS62122 TINA-TI Transient Spice Model

SLVM315.ZIP (44 KB) - TINA-TI Spice モデル
サポート対象の製品とハードウェア
計算ツール

SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC

Calculator tool to adjust the power supply's output voltage with an analog input voltage
サポート対象の製品とハードウェア
リファレンス・デザイン

TIDA-00690 — ワイヤレス スイッチ電源向けエネルギー ハーベストのリファレンス デザイン

TIDA-00690 リファレンス デザインは 、エネルギー ハーベスト スイッチ用のソリューションを実現します。線形ダイナモのように構築されたスイッチは、機械的エネルギーを電気エネルギーに変換します。TIDA-00690 デザインにより、この電気エネルギーを最適な方法で収集できます。このデザインを使用すると、機械のスタート/ストップを対象に、バルブや他の機械式アクチュエータ、緊急スイッチ、コントローラのワイヤレス位置制御を実現できます。さらに、ワイヤレスであれば、システムの柔軟性と稼働時間が向上します。たとえば、機械的な振動や化学的に攻撃的な環境では、ワイヤが実用的ではない場合があります。
サポート対象の製品とハードウェア
パッケージ ピン数 CAD シンボル、フットプリント、および 3D モデル
WSON (DRV) 6 Ultra Librarian

購入と品質

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ