TPS62184
- Dual Phase Balanced Peak Current Mode
- Input Voltage Range: 4 V to 17 V
- Output Voltage:
- 0.9 V ≤ VOUT ≤ 1.8 V (6A),
- 1.8 V ≤ VOUT ≤ 2.5 V (5.5A)
- 2.5 V ≤ VOUT ≤ 3.5 V (5A)
- Typical Quiescent Current of 28 µA
- Output Voltage Accuracy of ±1% (PWM Mode)
- Automatic Efficiency Enhancement (AEE™)
- Phase Shifted Operation
- Automatic Power Save Mode
- Adjustable Soft Start
- Power Good Output
- Undervoltage Lockout
- HICCUP Over Current Protection
- Over Temperature Protection
- Pin to Pin Compatible with TPS62180/2
- NanoFree™ 2.10 mm × 3.10 mm DSBGA Package
The TPS62184 is a synchronous dual-phase step-down DC-DC converter for low profile power rails. It operates with two identical, current balanced phases that are peak current controlled enabling use in height limited applications.
With a wide operating input voltage range of 4 V to 17 V, the device is ideally suited for systems powered from multi-cell Li-Ion batteries or 12-V rails. The output current of 6 A is continuously provided by two phases of 3 A each, allowing the use of low profile external components. The phases operate out of phase, reducing switching noise significantly.
The TPS62184 automatically enters Power Save Mode to maintain high efficiency down to very light loads. It also incorporates an Automatic Efficiency Enhancement (AEE™) for the entire duty cycle range.
The device features a Power Good signal, as well as an adjustable soft start. The quiescent current is typically 28 µA, it is able to run in 100% mode, and it has no duty cycle limitation even at lowest output voltage.
The TPS62184 is packaged in a small 24-bump, 0.5 mm pitch DSBGA package.
技術資料
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
TPS62184EVM-581 — 17V 入力、6A 出力、自動効率拡張機能付き (AEE TM) 2 相降圧コンバータ
TPS62184EVM-581 (PWR581-002) を使用すると、TPS62184 6A、2 相降圧コンバータを容易に評価できます。 評価基板は、4V ~ 17V の入力電圧から 1.8V の出力電圧を供給します。 TPS62184 は自動効率拡張機能 (AEE™) を搭載しており、負荷電流範囲全体で 90% を超える効率を実現します。 小型ソリューション サイズ (99mm²) で低プロファイルが可能であるため、タブレット、ソリッド ステート ドライブ (SSD)、その他のポータブル機器において、非常に高密度な電源ソリューションを実現できます。
SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC
PMP11438 — 12V 入力から 1.2V 出力で 6A 以上の負荷電流に変換する 3 種類の降圧コンバータ回路のリファレンス デザイン
PMP11438 は、3 種類の電源ソリューションを比較するために使用される車両であり、12V バスを 1.2V、6 ~ 10A に変換します。1.2V の出力電圧は DDR4 メモリ アプリケーションに適用できます。各ソリューションには、全負荷効率、軽負荷時の効率、密度、高さ、過渡応答、またはこれらの何らかの組み合わせが得られる利点があります。
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| DSBGA (YZF) | 24 | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。